|
|
|
|
|
|
|
|
$37.99
Scott USA Model 87 OTG Goggles 372872
Dennis Kirk Part #: 372872
Scott USA Model 87 OTG Goggles 372872: Deep urethane frame fit over eyeglasses. Hydrophilic face foam. Silicone-coated 1 3/4" woven strap. .030 clear single PMT Lexan® lens, , ADDITIONAL INFORMATION: Foam Color: Gray and Black. Logo: White "SCOTT" in white background. Strap: 1 5/8 in. Wide w/anti-slip silicone. Lens: Single, clear PMT Lexan with tear-off pins. Vents: Top, Bottom, and Sides w/black foam filters..
5 on Hand
More Info/Options for Scott USA Model 87 OTG Goggles 372872
|
|
|
|
$37.99
Scott USA Model 87 OTG Goggles 372870
Dennis Kirk Part #: 372870
Scott USA Model 87 OTG Goggles 372870: Deep urethane frame fit over eyeglasses. Hydrophilic face foam. Silicone-coated 1 3/4" woven strap. .030 clear single PMT Lexan® lens, , ADDITIONAL INFORMATION: Foam Color: Gray and Black. Logo: White "SCOTT" in white background. Strap: 1 5/8 in. Wide w/anti-slip silicone. Lens: Single, clear PMT Lexan with tear-off pins. Vents: Top, Bottom, and Sides w/black foam filters..
10+ on hand
More Info/Options for Scott USA Model 87 OTG Goggles 372870
|
|
|
|
$30.99
Battery Tender Battery Tender Jr. 6-Volt Model 28764
Dennis Kirk Part #: 28764
Battery Tender Battery Tender Jr. 6-Volt Model 28764: Manufacturer part # BATTERY TENDER J - Two-stage, fully automatic battery charger. Suitable for lead-acid, sealed maintenance-free and gel cell batteries. Smart trickle charger maintains battery when charging process is finished. Lightweight and compact -- perfect for use when space is limited. Two-color LED indicator. Reverse polarity protection. Comes with both 12 output cord and quick-connect/disconnect snapcord. Two-year manufacturers warranty.. BATTERY TENDER J
7 on Hand
More Info/Options for Battery Tender Battery Tender Jr. 6-Volt Model 28764
|
|
|
|
$30.99
Battery Tender Battery Tender Jr. 12-Volt Model 28765
Dennis Kirk Part #: 28765
Battery Tender Battery Tender Jr. 12-Volt Model 28765: Manufacturer part # BATTERY TENDER J - Two-stage, fully automatic battery charger. Suitable for lead-acid, sealed maintenance-free and gel cell batteries. Smart trickle charger maintains battery when charging process is finished. Automatically converts to float charger, monitoring battery at 13.2 volts once 14.4 VDC charge is attained. Should battery drop below 12.6 volts, full charging resumes until 14.4 VDC is reached again -- battery is always ready to go. Lightweight and compact -- perfect for use when space is limited. Two-color LED indicator. Reverse polarity protection. Comes with both 12 output cord and quick-connect/disconnect snapcord. Two-year manufacturers warranty.. BATTERY TENDER J
10+ on hand
More Info/Options for Battery Tender Battery Tender Jr. 12-Volt Model 28765
|
|
|
|
|
|
$31.99
H55018 Pingel Master Lock Model 220
Dennis Kirk Part #: H55018
H55018 Pingel Master Lock Model 220 : Manufacturer part # LM750 - Keeps your padlock handy at all times. No drilling required for mounting, simply use an existing bolt hole. On rubber-mounted chassis, install on forward frame yoke below steering pin, on one of the highway peg mounting plate bolts or on various sissy bar bolts. On rigid mount chassis, install on forward frame yoke, cross bracket, fork leg trim lower bolt or the upper safety bar bolt. Patented; made from polished stainless steel and fits H-D logo locks, Master lock model 220 and American lock model H-10. Made in the U.S.A... LM750
1 on Hand
More Info/Options for H55018 Pingel Master Lock Model 220
|
|
|
|
|
|
$14.99
Dennis Kirk, Inc. Tether Switch for Yamaha and 96-98 Arctic Cat ZR models 210033
Dennis Kirk Part #: 210033
Dennis Kirk, Inc. Tether Switch for Yamaha and 96-98 Arctic Cat ZR models 210033: Manufacturer part # 01-111-14 - Disconnects ignition instantly when rider is separated from machine. Safety feature required by most racing organizations. Safety stop switch only; no tether included -- use PART NO. 21-214. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 01-111-14
10+ on hand
More Info/Options for Dennis Kirk, Inc. Tether Switch for Yamaha and 96-98 Arctic Cat ZR models 210033
|
|
|
|
