|
|
|
|
|
|
|
|
|
|
$126.99
Black Starting Line Powder Pro Skis
Dennis Kirk Part #: 10905
Black Starting Line Powder Pro Skis: Manufacturer part # 35-340 - You need maximum flotation and precise steering control in loose snow -- SLP provides it with the new Powder Pro Skis Increases your deep-snow steering ability and low-speed mobility -- helps eliminate long aggressive tracks tendency to make machines push through corners. Reduces drag on front end components such as the belly pan, bulkhead, front suspension and steering components by improved front-end lift. Patented ski bottom design uses a multilevel keel that provides aggressive steering ability with minimal arm effort. Only the lower keel contacts the trail in packed snow conditions, much like SLPs SLT ski; upper keel aids lower keel in loose snow and powder. Exclusive Compaction Control Technology (CCT) uses powder control wings to direct snow under the ski for added ski lift when it is compacted. Recommended for use in mountain/powder conditions and for snocross-type riding. For a pair of skis order two mount kits, two ski bottoms and your choice of center wear rods. , NOTE: Use one of the following wear rods:, Stud Boy , Shaper 4 1/2 in. part number 031892, Shaper 6 in. part number 031893, Shaper 7 1/2 in. part number 031894, SLP , Trail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823, Loose snow carbide part number 031490, Loose snow carbide part number 031491, Pro race snocross carbide part number 031636, Non-carbide keel blade for use with part number 10823; use part number 10824. 35-340
2 on Hand
More Info/Options for Black Starting Line Powder Pro Skis
|
|
|
|
$126.99
Green Starting Line Powder Pro Skis
Dennis Kirk Part #: 10909
Green Starting Line Powder Pro Skis: Manufacturer part # 35-344 - You need maximum flotation and precise steering control in loose snow -- SLP provides it with the new Powder Pro Skis Increases your deep-snow steering ability and low-speed mobility -- helps eliminate long aggressive tracks tendency to make machines push through corners. Reduces drag on front end components such as the belly pan, bulkhead, front suspension and steering components by improved front-end lift. Patented ski bottom design uses a multilevel keel that provides aggressive steering ability with minimal arm effort. Only the lower keel contacts the trail in packed snow conditions, much like SLPs SLT ski; upper keel aids lower keel in loose snow and powder. Exclusive Compaction Control Technology (CCT) uses powder control wings to direct snow under the ski for added ski lift when it is compacted. Recommended for use in mountain/powder conditions and for snocross-type riding. For a pair of skis order two mount kits, two ski bottoms and your choice of center wear rods. , NOTE: Use one of the following wear rods:, Stud Boy , Shaper 4 1/2 in. part number 031892, Shaper 6 in. part number 031893, Shaper 7 1/2 in. part number 031894, SLP , Trail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823, Loose snow carbide part number 031490, Loose snow carbide part number 031491, Pro race snocross carbide part number 031636, Non-carbide keel blade for use with part number 10823; use part number 10824. 35-344
Expected Soon
More Info/Options for Green Starting Line Powder Pro Skis
|
|
|
|
$126.99
Bright Red Starting Line Powder Pro Skis
Dennis Kirk Part #: 10906
Bright Red Starting Line Powder Pro Skis: Manufacturer part # 35-341 - You need maximum flotation and precise steering control in loose snow -- SLP provides it with the new Powder Pro Skis Increases your deep-snow steering ability and low-speed mobility -- helps eliminate long aggressive tracks tendency to make machines push through corners. Reduces drag on front end components such as the belly pan, bulkhead, front suspension and steering components by improved front-end lift. Patented ski bottom design uses a multilevel keel that provides aggressive steering ability with minimal arm effort. Only the lower keel contacts the trail in packed snow conditions, much like SLPs SLT ski; upper keel aids lower keel in loose snow and powder. Exclusive Compaction Control Technology (CCT) uses powder control wings to direct snow under the ski for added ski lift when it is compacted. Recommended for use in mountain/powder conditions and for snocross-type riding. For a pair of skis order two mount kits, two ski bottoms and your choice of center wear rods. , NOTE: Use one of the following wear rods:, Stud Boy , Shaper 4 1/2 in. part number 031892, Shaper 6 in. part number 031893, Shaper 7 1/2 in. part number 031894, SLP , Trail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823, Loose snow carbide part number 031490, Loose snow carbide part number 031491, Pro race snocross carbide part number 031636, Non-carbide keel blade for use with part number 10823; use part number 10824. 35-341
1 on Hand
More Info/Options for Bright Red Starting Line Powder Pro Skis
|
|
|
|
$126.99
Blue Starting Line Powder Pro Skis
Dennis Kirk Part #: 10907
Blue Starting Line Powder Pro Skis: Manufacturer part # 35-342 - You need maximum flotation and precise steering control in loose snow -- SLP provides it with the new Powder Pro Skis Increases your deep-snow steering ability and low-speed mobility -- helps eliminate long aggressive tracks tendency to make machines push through corners. Reduces drag on front end components such as the belly pan, bulkhead, front suspension and steering components by improved front-end lift. Patented ski bottom design uses a multilevel keel that provides aggressive steering ability with minimal arm effort. Only the lower keel contacts the trail in packed snow conditions, much like SLPs SLT ski; upper keel aids lower keel in loose snow and powder. Exclusive Compaction Control Technology (CCT) uses powder control wings to direct snow under the ski for added ski lift when it is compacted. Recommended for use in mountain/powder conditions and for snocross-type riding. For a pair of skis order two mount kits, two ski bottoms and your choice of center wear rods. , NOTE: Use one of the following wear rods:, Stud Boy , Shaper 4 1/2 in. part number 031892, Shaper 6 in. part number 031893, Shaper 7 1/2 in. part number 031894, SLP , Trail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823, Loose snow carbide part number 031490, Loose snow carbide part number 031491, Pro race snocross carbide part number 031636, Non-carbide keel blade for use with part number 10823; use part number 10824. 35-342
2 on Hand
More Info/Options for Blue Starting Line Powder Pro Skis
|
|
|
|
$126.99
Yellow Starting Line Powder Pro Skis
Dennis Kirk Part #: 10908
Yellow Starting Line Powder Pro Skis: Manufacturer part # 35-343 - You need maximum flotation and precise steering control in loose snow -- SLP provides it with the new Powder Pro Skis Increases your deep-snow steering ability and low-speed mobility -- helps eliminate long aggressive tracks tendency to make machines push through corners. Reduces drag on front end components such as the belly pan, bulkhead, front suspension and steering components by improved front-end lift. Patented ski bottom design uses a multilevel keel that provides aggressive steering ability with minimal arm effort. Only the lower keel contacts the trail in packed snow conditions, much like SLPs SLT ski; upper keel aids lower keel in loose snow and powder. Exclusive Compaction Control Technology (CCT) uses powder control wings to direct snow under the ski for added ski lift when it is compacted. Recommended for use in mountain/powder conditions and for snocross-type riding. For a pair of skis order two mount kits, two ski bottoms and your choice of center wear rods. , NOTE: Use one of the following wear rods:, Stud Boy , Shaper 4 1/2 in. part number 031892, Shaper 6 in. part number 031893, Shaper 7 1/2 in. part number 031894, SLP , Trail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823, Loose snow carbide part number 031490, Loose snow carbide part number 031491, Pro race snocross carbide part number 031636, Non-carbide keel blade for use with part number 10823; use part number 10824. 35-343
2 on Hand
More Info/Options for Yellow Starting Line Powder Pro Skis
|
|
|
|
|
|
|
|
$112.99
Camoplast Universal Skis 10898
Dennis Kirk Part #: 10898
Camoplast Universal Skis 10898: Manufacturer part # 711290001 - Blow-molded, one-piece plastic skis. Weigh 10-40 percent less than competitive compression molded skis, just 4.9 lbs per ski. All-in-one ski and handle design produces a ski that is extremely resistant to breakage. Excellent handling over a wide variety of conditions including improved performance in reverse. Sold in pair, , NOTE: Order one pair of skis, one mount kit and one wear bar kit for a complete package, , CAMOPLAST SKI MOUNT KITS: Arctic Cat AWS III, IV, V narrow - Part No. 10902 Polaris 82-06 (all except IQ chassis) - Part No. 10901 Ski-doo with DSA suspension - Part No. 10899 Ski-doo with ADSA suspension, ZX chassis - Part No. 10900 Ski-doo REV models 03-08 (exc. REV-XP 08) - Part No. 10946 Yamaha 00-07 (all), V-Max, Mountain Max 97-99 - Part No. 10903, , WOODYS CARBIDE WEAR RODS 4" carbide - Part No. 031843 6" carbide - Part No. 031806 8" carbide - Part No. 031807. 711290001
5 on Hand
More Info/Options for Camoplast Universal Skis 10898
|
|
