Ktm 125

$137.99 LA Choppers Hefty 12.5 in. Ape Hanger Handlebar Hefty 12.5
Manufacturer: LA Choppers
Dennis Kirk Part #: 595381
LA Choppers Hefty 12.5 in. Ape Hanger Handlebar: Manufacturer part # Hefty 12.5 - Handlebars are 1 1/4 in. in diameter with a chrome-plated, polished finish. All bars are dimpled and drilled for internal wiring. Tapered for clearance of master cylinders and hydraulic clutch assemblies. Handlebars have a 1 1/4 in. diameter in the clamping area and will require the use of special risers (PART # 59-5383) sold separately. , , NOTE: Not for 08-09 Touring models. Hefty 12.5
2 on hand

More Info/Options for LA Choppers Hefty 12.5 in. Ape Hanger Handlebar Hefty 12.5

Ktm 125

$19.95 Moose T-Stand for KTM MS22M00601
Manufacturer: Moose
Dennis Kirk Part #: 282601
Moose T-Stand for KTM: Manufacturer part # MS22M00601 - Sized per application, the axle pin of these stands will fit snugly in your rear axle. T-stands don't fall off when you move your bike like triangle stands do. No removable or changeable pieces to fall out or get lost. Made from steel and given a very durable powder coat finish. Heavy duty stand will not fall over when you wash your bike, or stand it on soft ground. Made in the U.S.A.. , Dimensions: , Height: 11 1/2 in., Pin Diameter: .445 (7/16 in.) fit 11mm hole, Pin Length: 1 13/16 in.. MS22M00601
3 on hand

More Info/Options for Moose T-Stand for KTM MS22M00601

Ktm 125

$19.95 Moose KTM Replacement Hardware Kit Track Box 18300
Manufacturer: Moose
Dennis Kirk Part #: 271548
Moose KTM Replacement Hardware Kit Track Box: Manufacturer part # 18300 - Replacement bolt kit specifically for KTM dirt bikes. Hardware is Dacromet-plated, 8.8 grade, and has dimpled heads like stock. Less expensive than OEM and priceless when you really need it. Keep a box in your toolbox, riding pack or gear bag for those critical moments. 48 piece. , , Included Items:. , 1. (4) 8mm-1.25 x 30mm hex head bolts. , 2. (4) 6mm-1.00 x 30mm hex head bolts. , 3. ((8) 6mm-1.00 x 20mm hex head bolts. , 4. (8) 6mm-1.00 x 16mm hex head bolts. , 5. (4) 6mm-1.00 x 12mm hex head bolts. , 6. (4) 6mm-1.00 x 10mm hex head bolts. , 7. (4) 6mm-1.00 x 7mm shouldered hex head bolts. , 8. (1) 8mm-1.25 nylock nut. , 9. (1) 6mm-1.00 nylock nut. , 10. (4) 6mm flat washers. , 11. (2) 6mm domed washers. , 12. (4) 6mm self tapping hex head screws. , 13. (2) Coder pins.. 18300
7 on hand

More Info/Options for Moose KTM Replacement Hardware Kit Track Box 18300

Ktm 125

$9.99 Moto Caps KTM Orange Motocaps MCC644
Manufacturer: Moto Caps
Dennis Kirk Part #: 535305
Moto Caps KTM Orange Motocaps: Manufacturer part # MCC644 - A high-tech highlight for your ride. Chromed ABS plastic. All caps are individually fitted with a Buna O-ring for a perfect airtight seal. Full-color logos are highly-detailed and protected by a clear polycarbonate coating as strong as a jet fighter's canopy. Logos are extremely waterproof and fade-proof. Sold in pairs. Made in the U.S.A... MCC644
2 on hand

More Info/Options for Moto Caps KTM Orange Motocaps MCC644

Ktm 125

$14.99 Russell 10mm x 1.25 in. Banjo Bolt R405143B
Manufacturer: Russell
Dennis Kirk Part #: 270813
Russell 10mm x 1.25 in. Banjo Bolt: Manufacturer part # R405143B - Matching reusable adapter fitting for Renegade Universal Brake Line. Features the same exclusive Twilight Black Finish. R405143B
3 on hand

More Info/Options for Russell 10mm x 1.25 in. Banjo Bolt R405143B

Ktm 125

$11.99 Russell 10mm x 1.25 Double Banjo Bolt R40508C
Manufacturer: Russell
Dennis Kirk Part #: 194423
Russell 10mm x 1.25 Double Banjo Bolt: Manufacturer part # R40508C - All are sold each unless noted, , NOTE: XL models 04-09 use metric 10mm-1.25 and 12mm-1.50 banjo bolts, washers and fittings. All Big Twin (except FLHR/FLHT/FLHX/FLTR 08-09) and pre 04 XL models use standard 3/8 in. and 7/16 in. banjo bolts, washers and fittings. Fittings and washers listed as 3/8 in./10mm will work in either application.. R40508C
3 on hand

More Info/Options for Russell 10mm x 1.25 Double Banjo Bolt R40508C

Ktm 125

$10.99 Russell 10mm x 1.25 Chrome Banjo Bolt R40514C
Manufacturer: Russell
Dennis Kirk Part #: 194424
Russell 10mm x 1.25 Chrome Banjo Bolt: Manufacturer part # R40514C - All are sold each unless noted, , NOTE: XL models 04-09 use metric 10mm-1.25 and 12mm-1.50 banjo bolts, washers and fittings. All Big Twin (except FLHR/FLHT/FLHX/FLTR 08-09) and pre 04 XL models use standard 3/8 in. and 7/16 in. banjo bolts, washers and fittings. Fittings and washers listed as 3/8 in./10mm will work in either application.. R40514C
3 on hand

More Info/Options for Russell 10mm x 1.25 Chrome Banjo Bolt R40514C

Ktm 125

$317.99 Performance Machine Chrome 4-Piston Caliper (125 x 4s) p1901559
Manufacturer: Performance Machine
Dennis Kirk Part #: 1901559
Performance Machine Chrome 4-Piston Caliper (125 x 4s): Manufacturer part # p1901559 - Refer to caliper type (in parentheses) in caliper application charts to determine correct pads for your caliper. For Performance Machine calipers. p1901559
1 on hand

More Info/Options for Performance Machine Chrome 4-Piston Caliper (125 x 4s) p1901559

Ktm 125

$298.99 Performance Machine Polished 4-Piston Caliper (125 x 4s) p1901560
Manufacturer: Performance Machine
Dennis Kirk Part #: 1901560
Performance Machine Polished 4-Piston Caliper (125 x 4s): Manufacturer part # p1901560 - Refer to caliper type (in parentheses) in caliper application charts to determine correct pads for your caliper. For Performance Machine calipers. p1901560
2 on hand

More Info/Options for Performance Machine Polished 4-Piston Caliper (125 x 4s) p1901560

Ktm 125

$59.99 Battery Tender Plus - 6V/1.25 Amps BATTERY TENDER P
Manufacturer: Battery Tender
Dennis Kirk Part #: 281822
Battery Tender Plus - 6V/1.25 Amps: Manufacturer part # BATTERY TENDER P - Now you can constantly monitor a battery without the damaging effects of trickle chargers that eventually boil dry or overcharge batteries A charge cycle initially brings the battery to a full charge at approximately 14.2 volts. After the battery is fully charged, the Battery Tender Plus converts to a float charger and monitors the battery at 13.2 volts. Some periodic maintenance is recommended, but Battery Tender Plus will monitor a battery for years without boiling or destroying it. Features new fused quick disconnect rings with a weather cover. This has 1.25 amps. , , NOTE: Earlier model Battery Tenders have a WHITE snap cord connector; later models have a BLACK snap connector. These snap cords are NOT interchangeable.. BATTERY TENDER P
4 on hand

More Info/Options for Battery Tender Plus - 6V/1.25 Amps BATTERY TENDER P

Ktm 125

$5.99 Goodridge Chrome 10mm x 1.25 in. Banjo Bolt 9920332CH
Manufacturer: Goodridge
Dennis Kirk Part #: 15911
Goodridge Chrome 10mm x 1.25 in. Banjo Bolt : Manufacturer part # 9920332CH - For use with Goodridge adaptors and brake lines. Sold as Each.. 9920332CH
More than 10 on hand

More Info/Options for Goodridge Chrome 10mm x 1.25 in. Banjo Bolt 9920332CH

Ktm 125

$7.95 Drag Specialties 10mm-1.25 Double Banjo Bolt 17420117
Manufacturer: Drag Specialties
Dennis Kirk Part #: 271620
Drag Specialties 10mm-1.25 Double Banjo Bolt: Manufacturer part # 17420117 - Consistant, reliable performance from top-quality banjo bolts. Chrome plated. MVSS-106 DOT approved. Sold each. Made in the U.S.A... 17420117
1 on hand

More Info/Options for Drag Specialties 10mm-1.25 Double Banjo Bolt 17420117

Ktm 125

Ktm 125