|
|
|
|
|
|
$59.95
Moose Stage 1 Jet Kit 172925
Dennis Kirk Part #: 172925
Moose Stage 1 Jet Kit 172925: Manufacturer part # 1007-0192 - Moose Dynojet jet kits provide a simple and affordable solution to carburetor tuning problems. Kits increase power and smoothness throughout the rev range while maintaining optimum fuel economy. Designed for machines with stock engines using the stock airbox, air filter and stock or aftermarket exhaust. Fully adjustable to allow for the use of well-designed aftermarket exhausts and stock replacement air filters. Improve throttle response and drivability. Power increases of approximately 5% throughout the entire power range. , NOTE: Included Items:, 1-Main Jet CJ124, 1-Main Jet CJ128, 1-Main Jet CJ132, 1-Main Jet CJ136, 1-Main Jet CJ140, 1-Main Jet CJ144, 1-Fuel needle, 1-Adjusting washer, 1-E-clip, 1-Main jet adapter. 1007-0192
Expected Soon
More Info/Options for Moose Stage 1 Jet Kit 172925
|
|
|
|
$59.95
Moose Stage 1 Jet Kit 172923
Dennis Kirk Part #: 172923
Moose Stage 1 Jet Kit 172923: Manufacturer part # 1007-0190 - Moose Dynojet jet kits provide a simple and affordable solution to carburetor tuning problems. Kits increase power and smoothness throughout the rev range while maintaining optimum fuel economy. Designed for machines with stock engines using the stock airbox, air filter and stock or aftermarket exhaust. Fully adjustable to allow for the use of well-designed aftermarket exhausts and stock replacement air filters. Improve throttle response and drivability. Power increases of approximately 5 percent throughout the entire power range. INCLUDED ITEMS: Four main jets. One fuel needle. One pilot jet. One e-clip. One adjusting washer. One main jet adapter. One instruction sheet.. 1007-0190
1 on Hand
More Info/Options for Moose Stage 1 Jet Kit 172923
|
|
|
|
$59.95
Moose Stage 1 Jet Kit 172938
Dennis Kirk Part #: 172938
Moose Stage 1 Jet Kit 172938: Manufacturer part # 1007-0203 - Moose Dynojet jet kits provide a simple and affordable solution to carburetor tuning problems. Kits increase power and smoothness throughout the rev range while maintaining optimum fuel economy. Designed for machines with stock engines using the stock airbox, air filter and stock or aftermarket exhaust. Fully adjustable to allow for the use of well-designed aftermarket exhausts and stock replacement air filters. Improve throttle response and drivability. Power increases of approximately 5 percent throughout the entire power range. INCLUDED ITEMS: Nine main jets. One fuel needle. One pilot jet. One adjusting washer. One e-clip. One main jet adapter. One instruction sheet.. 1007-0203
1 on Hand
More Info/Options for Moose Stage 1 Jet Kit 172938
|
|
|
|
|
|
$192.99
Wild 1 Inc. Chubby FLSTC/FLSTF Bar 595065
Dennis Kirk Part #: 595065
Wild 1 Inc. Chubby FLSTC/FLSTF Bar 595065: Manufacturer part # WO504 - These 1 1/4" diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls, stock risers and top clamps. Made in the U.S.A.. 1" Diameter clamping width: 5 1/8".. WO504
Expected Soon
More Info/Options for Wild 1 Inc. Chubby FLSTC/FLSTF Bar 595065
|
|
|
|
|
|
$192.99
Wild 1 Inc. Chubby Knuckle Bar 595064
Dennis Kirk Part #: 595064
Wild 1 Inc. Chubby Knuckle Bar 595064: Manufacturer part # WO503 - These 1 1/4" diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls, stock risers and top clamps. Made in the U.S.A.. 1" Diameter clamping width: 5 1/8".. WO503
1 on Hand
More Info/Options for Wild 1 Inc. Chubby Knuckle Bar 595064
|
|
|
|
$202.99
Wild 1 Inc. Chubby Springer Beach Bar 595091
Dennis Kirk Part #: 595091
Wild 1 Inc. Chubby Springer Beach Bar 595091: Manufacturer part # WO551 - These 1 1/4" diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls, stock risers and top clamps. Made in the U.S.A.. 1" Diameter clamping width: 5 1/8".. WO551
1 on Hand
More Info/Options for Wild 1 Inc. Chubby Springer Beach Bar 595091
|
|
|
|
|
|
