|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$789.99
H18825 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18825
H18825 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 07010002 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Streamline. Pointed at the rear with sqaure end. Notched for seat tube clearance. Capacity is approximately 4.5 gal.. 27" L X 11" W. Screw-in cap Bung. Work well with arched backbone frames, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010002
1 on Hand
More Info/Options for H18825 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$958.99
H18843 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18843
H18843 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 19140131 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Straight-up. 4" Square end Capacity is approximately 3.7 gal.. 25" L X 11" W. Matt Hotch pop-up cap, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 19140131
1 on Hand
More Info/Options for H18843 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18828 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18828
H18828 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 07010004 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Chopper. Square end and rounded sides. Capacity is approximately 4.5 gal.. 27" L X 11" W. Screw-in cap bung, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010004
1 on Hand
More Info/Options for H18828 Independent Gas Tank Company Stretch Tanks
|
|
