|
|
$230.99
R&D High Performance Racing Cylinder Head - 35cc (rec) 147903
Dennis Kirk Part #: 147903
R&D High Performance Racing Cylinder Head - 35cc (rec) 147903: Manufacturer part # 412-70035 - Stay ahead of the pack without running down your wallet with an R&D Racing head. These precision-cast heads provide superior design and function, raising your baseline compression ratio for greater overall power. Exact chamber volume match-up with CNC-machined combustion chambers. Increased top-end cooling and high-temp O-rings for sealing due to improved waterjacket areas. No more worrying about the failure of thin gaskets with these direct bolt-on heads. Choose your performance level; "Rec" heads raise the compression value to the optimum level for recreational applications, allowing you to use standard 92-octane pump gas while increasing throttle response and reliability. Higher-compression "Mod" heads are for highly modified engines using high-octane race fuel.. 412-70035
1 on Hand
More Info/Options for R&D High Performance Racing Cylinder Head - 35cc (rec) 147903
|
|
|
|
$283.99
R&D High Performance Racing Cylinder Head 14850
Dennis Kirk Part #: 14850
R&D High Performance Racing Cylinder Head 14850: Manufacturer part # 413-90046 - Stay ahead of the pack without running down your wallet with an R&D Racing head. These precision-cast heads provide superior design and function, raising your baseline compression ratio for greater overall power. Exact chamber volume match-up with CNC-machined combustion chambers. Increased top-end cooling and high-temp O-rings for sealing due to improved waterjacket areas. No more worrying about the failure of thin gaskets with these direct bolt-on heads. Choose your performance level; "Rec" heads raise the compression value to the optimum level for recreational applications, allowing you to use standard 92-octane pump gas while increasing throttle response and reliability. Higher-compression "Mod" heads are for highly modified engines using high-octane race fuel.. 413-90046
Expected Soon
More Info/Options for R&D High Performance Racing Cylinder Head 14850
|
|
|
|
$97.99
High Lifter Wide Trac Rear 1 1/2 in. Atv Wheel Spacers 55993
Dennis Kirk Part #: 55993
High Lifter Wide Trac Rear 1 1/2 in. Atv Wheel Spacers 55993: Manufacturer part # WT4415 - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters.. WT4415
1 on Hand
More Info/Options for High Lifter Wide Trac Rear 1 1/2 in. Atv Wheel Spacers 55993
|
|
|
|
$124.99
High Lifter Wide Tracs 1 1/2 in. Atv Wheels Spacers 550230
Dennis Kirk Part #: 550230
High Lifter Wide Tracs 1 1/2 in. Atv Wheels Spacers 550230: Manufacturer part # WT415615S - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters.. WT415615S
2 on Hand
More Info/Options for High Lifter Wide Tracs 1 1/2 in. Atv Wheels Spacers 550230
|
|
|
|
$124.99
High Lifter Wide Tracs 1 1/2 in. Atv Wheel Spacers 550229
Dennis Kirk Part #: 550229
High Lifter Wide Tracs 1 1/2 in. Atv Wheel Spacers 550229: Manufacturer part # WT414415S - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters.. WT414415S
1 on Hand
More Info/Options for High Lifter Wide Tracs 1 1/2 in. Atv Wheel Spacers 550229
|
|
|
|
$126.99
High Lifter Wide Trac 1 1/2 in. Atv Wheel Spacers 55991
Dennis Kirk Part #: 55991
High Lifter Wide Trac 1 1/2 in. Atv Wheel Spacers 55991: Manufacturer part # WT415615 - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters.. WT415615
4 on Hand
More Info/Options for High Lifter Wide Trac 1 1/2 in. Atv Wheel Spacers 55991
|
|
|
|
$81.99
High Lifter XL2 Cast Aluminum Wheel 552866
Dennis Kirk Part #: 552866
High Lifter XL2 Cast Aluminum Wheel 552866: Manufacturer part # SPRHF300 - Cast aluminum construction that has been clear-coated for a high-luster finish. Wheels measure 12" x 7" and have 4/110 bolt pattern. Include center-cap, lug nuts and chrome valve stem. Each wheel weighs 8 lb.. NOTE: , Aftermarket wheels are not exact matches for OEM wheels. This wheel is specified for every model that it will bolt onto, regardless of the original wheels width, diameter, offset and other specifications. It is your responsibility to determine whether it has similar specifications to your original wheel or not, and whether a tire size change is necessary when fitting it. When changing wheel offset, width, diameter or tire size from the original, you must check clearance for the brakes, a-arms, fenders and any other items that the wheel or tire may interfere with before mounting a tire on the wheel or the assembly to your ATV. If the replacement wheel's offset does not match the original exactly, it is better to have less offset in and more offset out to eliminate possible clearance issues. For additional information, including your original wheel sizes and offset, refer to our printed catalog or contact us. , NOTE: For replacement center cap use part number 552867. SPRHF300
2 on Hand
More Info/Options for High Lifter XL2 Cast Aluminum Wheel 552866
|
|
|
|
$87.99
High Lifter Wide Tracs 1in. Atv Wheel Spacers 55984
Dennis Kirk Part #: 55984
High Lifter Wide Tracs 1in. Atv Wheel Spacers 55984: Manufacturer part # WT41101 - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters.. WT41101
10 on Hand
More Info/Options for High Lifter Wide Tracs 1in. Atv Wheel Spacers 55984
|
|
|
|
$97.99
High Lifter Wide Trac 1 1/2 in. Atv Wheel Spacers 55987
Dennis Kirk Part #: 55987
High Lifter Wide Trac 1 1/2 in. Atv Wheel Spacers 55987: Manufacturer part # WT411515 - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. Enough for two wheels. , , NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters., , NOTE: Not for use on Arctic Cat models that have the stud that unscrews from the hub. WT411515
5 on Hand
More Info/Options for High Lifter Wide Trac 1 1/2 in. Atv Wheel Spacers 55987
|
|
|
|
$104.99
High Lifter Wide Trac 1 in. Atv Wheels Spacers 55990
Dennis Kirk Part #: 55990
High Lifter Wide Trac 1 in. Atv Wheels Spacers 55990: Manufacturer part # WT41561 - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters.. WT41561
7 on Hand
More Info/Options for High Lifter Wide Trac 1 in. Atv Wheels Spacers 55990
|
|
|
|
$96.95
High Lifter Wide Trac 1 in. Atv Wheels Spacers 55986
Dennis Kirk Part #: 55986
High Lifter Wide Trac 1 in. Atv Wheels Spacers 55986: Manufacturer part # WT41151 - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters. NOTE: Not for use of models where the stud unscrews from the hub.. WT41151
1 on Hand
More Info/Options for High Lifter Wide Trac 1 in. Atv Wheels Spacers 55986
|
|
|
|
$104.99
High Lifter Wide Trac 1 in. Atv Wheels Spacers 55988
Dennis Kirk Part #: 55988
High Lifter Wide Trac 1 in. Atv Wheels Spacers 55988: Manufacturer part # WT41371 - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters.. WT41371
4 on Hand
More Info/Options for High Lifter Wide Trac 1 in. Atv Wheels Spacers 55988
|
|
