$125.99Camoplast Universal Skis 711290001
Manufacturer: Camoplast
Dennis Kirk Part #: 10898
Camoplast Universal Skis: Manufacturer part # 711290001 - Blow-molded, one-piece plastic skis. Weigh 10-40 percent less than competitive compression molded skis, just 4.9 lbs per ski. All-in-one ski and handle design produces a ski that is extremely resistant to breakage. Excellent handling over a wide variety of conditions including improved performance in reverse. Sold in pair, , NOTE: Order one pair of skis, one mount kit and one wear bar kit for a complete package, , CAMOPLAST SKI MOUNT KITS: Arctic Cat AWS III, IV, V narrow - Part No. 10902 Polaris 82-06 (all except IQ chassis) - Part No. 10901 Ski-doo with DSA suspension - Part No. 10899 Ski-doo with ADSA suspension, ZX chassis - Part No. 10900 Ski-doo REV models 03-08 (exc. REV-XP 08) - Part No. 10946 Yamaha 00-07 (all), V-Max, Mountain Max 97-99 - Part No. 10903, , WOODYS CARBIDE WEAR RODS 4" carbide - Part No. 031843 6" carbide - Part No. 031806 8" carbide - Part No. 031807. 711290001 More than 10 on hand
$63.95Camoplast Ski Mount Kit 900MKA
Manufacturer: Camoplast
Dennis Kirk Part #: 10902
Camoplast Ski Mount Kit : Manufacturer part # 900MKA - Ski mount kit for Camoplast skis:, All-Terrain - Part No. 10951, Touring - Part No. 10898 Fits Arctic Cat AWS III, IV, V narrrow NOTE: Order one pair of skis, one mount kit and one wear bar kit for complete package. 900MKA 5 on hand
$139.99Camoplast Universal All-Terrain Skis 711290101
Manufacturer: Camoplast
Dennis Kirk Part #: 10951
Camoplast Universal All-Terrain Skis: Manufacturer part # 711290101 - Blow-molded, one-piece plastic skis. Weigh 10-40 percent less than competitive compression molded skis, just 4.7 lbs per ski. All-in-one ski and handle design produces a ski that is extremely resistant to breakage. Excellent handling over a wide variety of conditions including improved performance in reverse. Sold in pairs, , NOTE: Order one pair of skis, one mount kit and one wear bar kit for a complete package, , CAMOPLAST SKI MOUNT KITS: Arctic Cat AWS III, IV, V narrow - Part No. 10902 Polaris 82-06 (all except IQ chassis) - Part No. 10901 Ski-doo with DSA suspension - Part No. 10899 Ski-doo with ADSA suspension, ZX chassis - Part No. 10900 Ski-doo REV models 03-08 (exc. REV-XP 08) - Part No. 10946 Yamaha 00-07 (all), V-Max, Mountain Max 97-99 - Part No. 10903, , WOODYS CARBIDE WEAR RODS 4" carbide - Part No. 031843 6" carbide - Part No. 031806 8" carbide - Part No. 031807. 711290101 More than 10 on hand
$133.99Starting Line Powder Pro Ski 35-340
Manufacturer: Starting Line
Dennis Kirk Part #: 10905
Starting Line Powder Pro Ski: Manufacturer part # 35-340 - You need maximum flotation and precise steering control in loose snow -- SLP provides it with the new Powder Pro Skis Increases your deep-snow steering ability and low-speed mobility -- helps eliminate long aggressive tracks tendency to make machines push through corners. Reduces drag on front end components such as the belly pan, bulkhead, front suspension and steering components by improved front-end lift. Patented ski bottom design uses a multilevel keel that provides aggressive steering ability with minimal arm effort. Only the lower keel contacts the trail in packed snow conditions, much like SLPs SLT ski; upper keel aids lower keel in loose snow and powder. Exclusive Compaction Control Technology (CCT) uses powder control wings to direct snow under the ski for added ski lift when it is compacted. Recommended for use in mountain/powder conditions and for snocross-type riding. For a pair of skis order two mount kits, two ski bottoms and your choice of center wear rods. , NOTE: Use one of the following wear rods:, Stud Boy , Shaper 4 1/2 in. part number 031892, Shaper 6 in. part number 031893, Shaper 7 1/2 in. part number 031894, SLP , Trail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823, Loose snow carbide part number 031490, Loose snow carbide part number 031491, Pro race snocross carbide part number 031636, Non-carbide keel blade for use with part number 10823; use part number 10824. 35-340 8 on hand
$9.95Starting Line Ski Rubber Bumper 0832505
Manufacturer: Starting Line
Dennis Kirk Part #: 10248
Starting Line Ski Rubber Bumper: Manufacturer part # 0832505 - Exact replacement for OE parts. Sold each.. 0832505 More than 10 on hand
$21.99Sno-Stuff Ski Spreaders 535-210
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 1020
Sno-Stuff Ski Spreaders: Manufacturer part # 535-210 - For leaf spring suspensions. Widens ski stance by 4 1/2 in. and moves ski ahead and down 1/2 in.. Hardware and instructions included. Steel construction with black enamel finish. Not for machines with a top shock assemlby. Sold in pairs. 535-210 More than 10 on hand
$120.99SLP Ultra-Lite SLT Ski 35-170
Manufacturer: SLP
Dennis Kirk Part #: 10805
SLP Ultra-Lite SLT Ski: Manufacturer part # 35-170 - SLP patented "Rocker Keel" design. Excellent straight line tracking with even less arm effort than original ULTRA-LITE™ Skis. Lightweight and durable. Tuned flexibility. For a pair of skis order two mount kits and two ski bottoms. Wear rods not included separately. Options are 10823, 031490 or 031491. Best trail runner combination is the use of PART NO. 10823 Carbide Runners with optional 10824 Keel Blades - this combination achieves the maximum reduction of tracking and darting, with minimal arm effort. In loose snow/mountain riding conditions choose 031490 with 90 degree carbide for longest life or 031491 with 60 degree carbide for riders who prefer a steeper angle. Two-year limited warranty. Pictured in red. , NOTE: For carbide use any of the following:, Woodys, 4 in. carbide part number 031800, 6 in. carbide part number 031802, 8 in. carbide part number 031804, Roetin, Trail X-10 One carbides part number 03408, Performance X-10 Two carbides part number 03458, Hi-Performance X-PR One carbides part number 031347, Extreme X-PRT carbides part number 03620, Stud Boy , Shaper 4 1/2 in. part number 031892, Shaper 6 in. part number 031893, Shaper 7 1/2 in. part number 031894, SLP , Trail/packed snow 5 in. x 90 degree carbide, must use w/keel blade part number 10824; use this part number 10823, Loose snow carbide part number 031490, Loose snow carbide part number 031491, Pro race snocross carbide part number 031636, Non-carbide keel blade for use with part number 10823; use part number 10824, Carbide runners for Tri-Keel/Tri-Keel II part number 031257 and part number 031258, Non-carbide outer runners 5-bolt part number 031259, 5 in. carbide for Arctic Cat use part number 03824, 5 in. carbide for Polaris use part number 03823, 5 in. carbide for Ski-Doo use part number 03823, 5 in. carbide for Yamaha 1989-1996 use part number 03825, 5 in. carbide Yamaha 97-2004 use part number 03823, 6 in. carbide for Arctic Cat use part number 03827, 6 in. carbide for Polaris use part number 03826, 6 in. carbide for Ski-Doo use part number 03826, 6 in. carbide for Yamaha 1989-1996 use part number 03828, 6 in. carbide for Yamaha 1997-2004 use part number 03826. 35-170 More than 10 on hand
$75.99SLP Ski Slips 35-230
Manufacturer: SLP
Dennis Kirk Part #: 105824
SLP Ski Slips: Manufacturer part # 35-230 - Protect concrete floors, trailer decks, skis and carbides with high quality UHMW plasitc Ski-Slips Made from the same materail as most plastic skis. Super strong to resist carbide cutting while staying flexible even in extreme cold. Super slippery. No loose mounting hardware, universal fit for different ski designs. Easy on and off - small and compact for easy storage.. 35-230 More than 10 on hand
$57.99SLP Ultra-Lite Standard Ski Bottom 35-13
Manufacturer: SLP
Dennis Kirk Part #: 10590
SLP Ultra-Lite Standard Ski Bottom : Manufacturer part # 35-13 - Replacement Ultra-Lite® Standard Ski Bottoms, , NOTE: Fits all Polaris models with IFS, all Ski-Doo models with trailing arm and all Yamaha models 97-04 with trailing arm suspension. Runner bolt pattern is stock Polaris for Polaris IFS, Ski-Doo Trailing Arm and Yamaha Trailing Arm Suspension. Replacement rubber damper for 97-04 models with factory plastic skis for the Polaris with IFS order Part No. 10-674. This will not fit on a Ultra Lite SLT Skis and this does not match the OEM Polaris SLP Skis. 35-13 4 on hand
$208.99Ultra Pro Sport II Advantage Skis 77020339
Manufacturer: Ultra Pro
Dennis Kirk Part #: 105906
Ultra Pro Sport II Advantage Skis: Manufacturer part # 77020339 - Tamer version of the popular X-treme Advantage ski. Now uses same wear bars as all other C&A skis. Includes the unique 90 edge keel design, but with a less aggressive radius corners for a tamer feel. Design improves straight-line tracking and reduces darting. Recessed groove for ski wear bar prevents debris from catching between it and the ski and minimizes aggressive wear bar tracking. Rear of ski has a sharper upsweep angle to prevent ski from digging in when using reverse. Slim, lightweight shape with C&A exclusive mounting system and specially designed ski loops that are easy to grab. 5 in. wide, 38 in. overall length; weigh 4 3/4 lbs. without runner (add 1 lb. for runner). , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. 77020339 Expected Soon
$134.99Steffes OEM Replacement Skis 1070
Manufacturer: Steffes
Dennis Kirk Part #: 1070
Steffes OEM Replacement Skis: Manufacturer part # 1070 - Made in the U.S.A. of high-quality steel, Steffes skis offer optimum reliability and performance. All leaf spring-type skis match the latest updated version from the OEMs and include a shock bracket. Durable, high-gloss black finish. , NOTE: These replace OEM Metal Ski; does not include the plastic ski skin. Use your original or see Part No. 10-524 (Black) or 10-525 (Red). 1070 More than 10 on hand
$18.95Sport Parts Ski Pivot Bushing Kit p121772
Manufacturer: Sport Parts
Dennis Kirk Part #: 121772
Sport Parts Ski Pivot Bushing Kit: Manufacturer part # p121772 - Ski pivot bushing kit eliminates side-to-side kit play in the skis. Manufactured from premium Delrin AF material. Complete set with with grade-8 bolts. Fits Polaris Indy models 1981-2006. p121772 8 on hand
