$372.99Belt Drives LTD 11mm 1 1/2in. Belt Drive Kit 4731SE4
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: H02118
Belt Drives LTD 11mm 1 1/2in. Belt Drive Kit: Manufacturer part # 4731SE4 - Electric start 4-speed with idler gear (except rear belt drive models) 65-E84. Includes belt, clutch basket, front puller, nut and washer. Inner clutch hub and plates are not included, these must be purchased separately. Front pulley is drilled and tapped for easy removal. Pulley and clutch basket are hard, anodized aluminum. Made in the U.S.A... 4731SE4 1 on hand
$1815.99Belt Drives LTD 8mm Belt Drive Kit with Outboard Support Plate EVO900NEW
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: 02811
Belt Drives LTD 8mm Belt Drive Kit with Outboard Support Plate: Manufacturer part # EVO900NEW - Kit includes outboard bearing support for both engine output shaft and a 3" Kevlar belt drive clutch hub. Design is similar to BDL's Top Fuel belt kits. Kevlar clutch assembly, outer bearings and outer support plate also included; keeps the engine and transmission shafts from flexing. Polished 6061 aluminum outer support plate. Accepts any Big Twin-style starter 90-06. , , NOTE: Systems are not designed for use with floorboards... EVO900NEW Expected Soon
$170.99Belt Drives LTD Drive Belt PC133118
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: H02104
Belt Drives LTD Drive Belt: Manufacturer part # PC133118 - For Dyna Glide 91-99 with 70-tooth pulley. Add a fat rear tire without thinning your wallet. Drive belts are 3/8 in. narrower than OEM. Made in the U.S.A.. , NOTE: Designed for show use only, no warranty claims are made or implied.. PC133118 1 on hand
$372.99Belt Drives LTD 11mm 1 1/2in. Belt Drive Kit 4731SE5
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: 02580
Belt Drives LTD 11mm 1 1/2in. Belt Drive Kit: Manufacturer part # 4731SE5 - For electric start 5-speed models with idler gear belt 79-E84. Includes belt, clutch basket, front puller, nut and washer. Inner clutch hub and plates are not included, these must be purchased separately. Front pulley is drilled and tapped for easy removal. Pulley and clutch basket are hard, anodized aluminum. Made in the U.S.A... 4731SE5 1 on hand
$293.99Belt Drives LTD 11mm 1 1/2in. Belt Drive Kit 4731TK1
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: 02583
Belt Drives LTD 11mm 1 1/2in. Belt Drive Kit: Manufacturer part # 4731TK1 - Kick start models, taper shaft 36-54. Kit comes with belt, clutch basket, front pulley, nut and washer. Pulley and clutch basket are hard anodized aluminum. Front pulley is drilled and tapped for easy removal. Made in the U.S.A... 4731TK1 1 on hand
$313.99Belt Drives LTD 8mm Belt Drive-1 1/2 in. Kit 6141SE1
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: H02109
Belt Drives LTD 8mm Belt Drive-1 1/2 in. Kit: Manufacturer part # 6141SE1 - Fits Electric Start models 65-78 Includes belt, clutch basket, front puller, nut and washer. Inner clutch hub and plates are not included, these must be purchased separately. Front pulley is drilled and tapped for easy removal. Pulley and clutch basket are hard, anodized aluminum. Made in the U.S.A... 6141SE1 1 on hand
$2234.99Belt Drives LTD 14mm x 85mm (3 3/8 in.) Monster Top Fuel Belt Drive Kit with Clutch TF2000NEW
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: 02812
Belt Drives LTD 14mm x 85mm (3 3/8 in.) Monster Top Fuel Belt Drive Kit with Clutch: Manufacturer part # TF2000NEW - Includes front and rear pulley, 3 3/8" belt, 11 steel clutch plates and nine 6 3/8" Kevlar friction plates; use up to nine springs for varying pressure to accommodate any motor size. Oil filter mount between the pulleys included. Polished outboard bearing support; outboard support is reversible and the back side is channeled for another distinct look, but only the flat side is polished. Made in the U.S.A.. , , NOTE: Not designed for use with floorboards... TF2000NEW Expected Soon
$63.99Belt Drives LTD SS-2 2 in. Belt Drive Polished Dome Cover SSPDC
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: 02681
Belt Drives LTD SS-2 2 in. Belt Drive Polished Dome Cover: Manufacturer part # SSPDC - Polished dome covers for BDL SS-2 in. belt drive; Part No. 02-673.. SSPDC 1 on hand
$170.99Belt Drives LTD Drive Belt PC128118
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: H02105
Belt Drives LTD Drive Belt: Manufacturer part # PC128118 - For Big Twin models with 61-tooth pulleys, Softail 93, International models 88-93. Add a fat rear tire without thinning your wallet. Drive belts are 3/8 in. narrower than OEM. Made in the U.S.A.. , NOTE: Designed for show use only, no warranty claims are made or implied.. PC128118 1 on hand
$170.99Belt Drives LTD Drive Belt PC130118
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: H02103
Belt Drives LTD Drive Belt: Manufacturer part # PC130118 - For 95-99 Softail models with 65-tooth pulleys. Replaces OEM number 40047-98. Add a fat rear tire without thinning your wallet. Drive belts are 3/8 in. narrower than OEM. Made in the U.S.A.. , NOTE: Designed for show use only, no warranty claims are made or implied.. PC130118 1 on hand
$1631.99Belt Drives LTD 8mm Belt Drives with Quiet Clutch System - Electric Start EVO11S
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: 382420
Belt Drives LTD 8mm Belt Drives with Quiet Clutch System - Electric Start: Manufacturer part # EVO11S - 3" electric start kit includes front pulley, belt, clutch hub and clutch basket and Kevlar clutch set (consists of two half plates, four full plates and five steel drive plates), 6061 T-6 billet motor plate, outside guard and polished pulley cover. Comes with the Quiet Clutch system. Precision-machined, polished aluminum pressure plate uses nine springs and shoulder bolts to ensure even spring pressure (included in kit). Rear pulley has a 40mm, double-row bearing with an inner stress-proof steel clutch hub to support the clutch. Tested by running a 125 hp bike through hundreds of holeshots; outstanding results included no failures or broken belts. Made in the U.S.A.. , , NOTE: 3" systems are not designed for use with floorboards. , , NOTE: Not for use with offset primaries.. EVO11S Expected Soon
$293.99Belt Drives LTD 11mm 1 1/2in. Belt Drive Kit 4731SK2
Manufacturer: Belt Drives LTD
Dennis Kirk Part #: 02582
Belt Drives LTD 11mm 1 1/2in. Belt Drive Kit: Manufacturer part # 4731SK2 - Kick start spline shaft models 1955-64. Kit comes with belt, clutch basket, front pulley, nut and washer. Pulley and clutch basket are hard anodized aluminum. Front pulley is drilled and tapped for easy removal. Made in the U.S.A... 4731SK2 1 on hand
