$1115.99Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide 07010189
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183331
Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide: Manufacturer part # 07010189 - 6-gallon one-piece tanks are 1 1/2 in. wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , NOTE: This item ships 3 or 4 days after the order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010189 1 on hand
$1115.99Russ Wernimont Designs Carb Gas Tank - 17 1/2 in. wide p183703
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183704
Russ Wernimont Designs Carb Gas Tank - 17 1/2 in. wide: Manufacturer part # p183703 - 17 1/2" and 20 1/2 in. widths are now available. A 3 in. stretch is featured on one-piece tanks. Curved bottom provides a custom look. Raw dash panel replaces the existing dash. Inside of tanks have a factory sealed powder coat primer. OEM fuel-pump assemblies are accepted on 03-07 style fuel-injected tanks and 96-06 style carb tanks include a filler plate/neck assembly; both use L96-08 non-vented gas caps. Approximate 6-gallon capacity. Tanks fit with RWD Profile (454538) and ProTour (454539) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , Dimensions , Length: 22 1/2 in., Width: 18 in., Tunnel Length: 18 1/2 in., , Tunnel Width , Front: 3 1/2 in., Rear: 5 in., , Tunnel Depth: , Front: 4 1/2 in., Rear: 4 1/4 in., , Tank Height: 9 in., Fuel Petcock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit., , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. p183703 1 on hand
$1115.99Russ Wernimont Designs Carb Gas Tank - 20 1/2 in. wide RWD-800C
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183040
Russ Wernimont Designs Carb Gas Tank - 20 1/2 in. wide: Manufacturer part # RWD-800C - 6-gallon one-piece tanks are 1 1/2 in. wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. RWD-800C 1 on hand
$137.99Paughco Custom 1-Piece Fatbob Style Gas Tank 820
Manufacturer: Paughco
Dennis Kirk Part #: 183278
Paughco Custom 1-Piece Fatbob Style Gas Tank: Manufacturer part # 820 - . A single cap, two petcock outlets. A high tunnel for the Fatbob look, one left side petcock outlet and a hole-to-hole center line on mounting brackets of 17 11/16 in. are featured on the Extra Wide Mustang. A left side external petcock outlet, indent on tank bottom for rocker box clearance and a hole-to-hole center line on mounting brackets of 19 3/4 in. are featured on the 1-piece Fatbob (19 1/2 in. L x 13 in. W x 8 in. D; Tunnel measures 2 3/16 in. W x 4 1/4 in. D). , DIMENSIONS: , Length: 20-1/2 in., Width: 13 in., Tunnel Length: 19 in., , TUNNEL WIDTH: , Front: 2-1/4 in., Rear: 2-1/4 in., , TUNNEL DEPTH: , Front: 4 in., Rear: 2 in., , Tank Height: 9-1/2 in., Fuel Petcock: Left center, Petcock Thread Size: 22mm, Gas Cap Thread: Cam style , NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings. , , NOTE: Will not work on any stock FXR or FLT, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 820 Expected Soon
$335.99Paughco Fatbob Style OEM Replacement Gas Tank 832B
Manufacturer: Paughco
Dennis Kirk Part #: 183279
Paughco Fatbob Style OEM Replacement Gas Tank: Manufacturer part # 832B - 4.2-gallon tank bolts to stock frame. Mount kit and hose line fittings are included. A left-side rear external outlet for stock petcock is featured on 18-3279. A left-side center external outlet for stock petcock is featured on 18-3280. Measures 19 1/4" L x 14 1/2" W x 8" D; hole-to-hole center line on mounting brackets measures 14 5/8", , DIMENSIONS , Length: 19", Width: 14 3/4", Tunnel Length: 19 3/8", Tunnel Width: , Front: 3 5/8", Rear: 4", Tunnel Depth: , Front: 2 1/2", Rear: 1 3/8", Tank Height: 8", Fuel Peacock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings. NOTE: This item ships in 3-4 days after the order is placed , , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 832B 1 on hand
CLEARANCE!
Was: $240.95
Now: $120.48
Drag Specialties Quickbob Gas Tank 011312BX38
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18220
Drag Specialties Quickbob Gas Tank: Manufacturer part # 011312BX38 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories for Harley-Davidson 4 1/2 gallon Fat Bob-style tank fits stock FX and FXE 73-84 frames with no modifications to the speedo or tach mounting. Uses stock mounting hardware. Screw-type filler necks are compatible with any late-style gas caps. Use any late-model (22mm) petcock. Unpainted steel finish, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011312BX38 1 on hand
$149.95Drag Specialties Gas Tank 011128BX34
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18482
Drag Specialties Gas Tank: Manufacturer part # 011128BX34 - Heavy gauge steel with reinforced seams. Includes extra strong mounting tabs. 2.9 gallon tanks are 2 in. wider than stock tanks. Unpainted steel finish. Uses 3/8 NPT petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011128BX34 1 on hand
$182.95Drag Specialties Fat Bob Style Gas Tank 011275BX36
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18249
Drag Specialties Fat Bob Style Gas Tank: Manufacturer part # 011275BX36 - For use with early style twist lock gas caps. Your choice of 3 1/2- or 5-gallon Fat Bob-style tanks for use on stock Harley and custom frames to 84. Accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks. Unpainted steel finish, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011275BX36 1 on hand
$341.95Drag Specialties Quickbob Rubbermount Gas Tank with Screw-In Bungs 011651BX38
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18222
Drag Specialties Quickbob Rubbermount Gas Tank with Screw-In Bungs: Manufacturer part # 011651BX38 - One-piece replicas of Fat Bob tanks with 3.6-gallon capacity. Two Bungs for screw-in type caps. Comes with rubber mount brackets and hardware. Speedometer not included; any Drag Specialties 4 5/8 in. speedometer for use with FL dash will work (except H40-0109) with H18-223 tank on 82-94 models. If you want to use the OEM electronic speedometer on 95-01 models, order Part No. H18-223 tank along with H18-225 mount kit with dash (mount kit also includes coil and ignition switch relocation brackets). Unpainted steel finish, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011651BX38 1 on hand
$359.95Drag Specialties 2 in. Extended Dash Style Gas Tank w/2 Screw Bungs 012835
Manufacturer: Drag Specialties
Dennis Kirk Part #: 183248
Drag Specialties 2 in. Extended Dash Style Gas Tank w/2 Screw Bungs: Manufacturer part # 012835 - 2" extended-length tanks are made from 16-gauge stamped steel. 5.1 gallon capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tanks require the use of 82-E96 gas caps (sold separately). Uses 22mm petcock. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , NOTE: For Softail models 01-06 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems, , DIMENISIONS: Length: 20-1/2 in.. Width: 17 in.. Tunnel Length 18-3/4 in.. TUNNEL WIDTH: Front: 3-1/16 in.. Rear: 2-3/8 in.. TUNNEL DEPTH: Front: 6-1/2 in.. Rear: 1-1/4 in.. Tank Height: 9-1/4 in.. Fuel Petcock: Rear Left. Petcock thread size: 22mm. Gas cap type: Threaded.. 012835 1 on hand
$42.95Drag Specialties Custom One-Piece Gas Tank Mounting Kit 346103PBLB1
Manufacturer: Drag Specialties
Dennis Kirk Part #: 182831
Drag Specialties Custom One-Piece Gas Tank Mounting Kit: Manufacturer part # 346103PBLB1 - Kit includes front and rear tank mountsm rubber grommets and hardware. Fits most aftermarket Softail one-piece tanks on 1984-99 models.. 346103PBLB1 1 on hand
$92.95Drag Specialties Mustang Single Cap Gas Tank 07010001
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18780
Drag Specialties Mustang Single Cap Gas Tank: Manufacturer part # 07010001 - Low-tunnel, Fat Bob-style tanks hold approximately 3.3 gal.. Petcock mount is 3/8 in. NPT-style two 1/4 in. NPT crossover fittings. Single- or dual-cap designs available. Tanks measure 19 3/4 in. L (including mounting tabs) x 11 1/2 in. W x 7 1/2 in. H (approximately), , NOTE: Not for use on fuel-injected models, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010001 3 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
