$26.99Carlini Paint Saver Plus System for Fuel Gauge PSP
Manufacturer: Carlini
Dennis Kirk Part #: H2632
Carlini Paint Saver Plus System for Fuel Gauge: Manufacturer part # PSP - Paint Saver Plus System for Fuel Gauge to match Paint Saver Ring Part No. H18032 Protect your tank from rabid fuel nozzles that try to chip your paint during fill-ups. New, easier-to-install design uses a Nitrile rubber vapor seal instead of epoxy. Highly polished stainless steel parts look great and fight corrosion. Conceals existing paint damage in most cases. Available for both standard filler necks and dummy filler necks with fuel gauge. Made in the U.S.A., , NOTE: This is a paint saver plus system for the fuel gauge to match Part No. H19032 system that fits L96-08 models, Not available for models though early 1996.. PSP 2 on hand
$399.95Drag Specialties One-Piece 2 in. Extended Dash Style Tank w/Fuel Gauge Bung 011814BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18868
Drag Specialties One-Piece 2 in. Extended Dash Style Tank w/Fuel Gauge Bung: Manufacturer part # 011814BX46 - 2 in. extended-length tanks are made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tank requires the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011814BX46 1 on hand
$374.95Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung 011861BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18874
Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung: Manufacturer part # 011861BX46 - Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tanks require the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges, , NOTE: For Softail models 01-06 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011861BX46 1 on hand
$369.95Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung 011813BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18865
Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung: Manufacturer part # 011813BX46 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories for Harley-Davidson. Two things go hand in hand at Drag: quality and quantity. Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Single screw-in cap tank require the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011813BX46 1 on hand
$429.95Drag Specialties 2 in. Extended Dash Style w/Fuel Gauge Bung, Use Single Screw-in Cap 011864BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18876
Drag Specialties 2 in. Extended Dash Style w/Fuel Gauge Bung, Use Single Screw-in Cap : Manufacturer part # 011864BX46 - 2 in. extended-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Single screw-in cap tank requires the use of 82-E96 gas cap (sold separately). Fuel gauge bung accept OEM-style or aftermarket fuel gauges, , NOTE: Seat nose may require modification to fit properly with extended tanks, , NOTE: For Softail models 01-06 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 011864BX46 1 on hand
$159.95Harley-Davidson Skull Collection LED Fuel Gauge 75095-05A
Manufacturer: Harley-Davidson
Dennis Kirk Part #: 495253
Harley-Davidson Skull Collection LED Fuel Gauge: Manufacturer part # 75095-05A - Complements the Skull Collection Billet Fuel Cap H-D part number 75097-05. Photocell automatically adjusted LED brightness for improved visibility in direct sunlight, and dims at night to avoid distraction. , , Included Items: , LED Fuel Gauge, Wiring Harness, Fuel Gauge Gasket, 4-Pin Pin Housing, Hardware Kit. 75095-05A 1 on hand
$159.95Harley-Davidson Skull Collection LED Fuel Gauge 75098-08
Manufacturer: Harley-Davidson
Dennis Kirk Part #: 495254
Harley-Davidson Skull Collection LED Fuel Gauge: Manufacturer part # 75098-08 - Complements the Skull Collection Billet Fuel Cap H-D part number 75097-05, Dennis Kirk part number 49-5252. Photocell automatically adjusted LED brightness for improved visibility in direct sunlight, and dims at night to avoid distraction. , , Included Items: , LED Fuel Gauge, Wiring Harness, Fuel Gauge Gasket, Pin Housing. 4-Pin, Hardware Kit. 75098-08 2 on hand
$14.99Kelch Vented Screw-0n Gas Tank Cap with Gauge 202162
Manufacturer: Kelch
Dennis Kirk Part #: 18387
Kelch Vented Screw-0n Gas Tank Cap with Gauge: Manufacturer part # 202162 - Kelch has produced gas caps and gauges for most of the original equipment manufacturers. Produced to OEM specifications and will fit many brands of snowmobiles old and new. Complete with gaskets to help prevent leaking. 2 1/8 in. ID x 11 3/4 in. Length.. 202162 More than 10 on hand
$7.25Kelch Vented Screw-On Gas Tank Cap Without Gauge 202164
Manufacturer: Kelch
Dennis Kirk Part #: 1831
Kelch Vented Screw-On Gas Tank Cap Without Gauge: Manufacturer part # 202164 - Kelch has produced gas caps and gauges for most of the original equipment manufacturers. Produced to OEM specifications and will fit many brands of snowmobiles old and new. Complete with gaskets to help prevent leaking. 2 1/8 in. ID.. 202164 More than 10 on hand
$6.99Kelch Bayonet Vented Gas Tank Cap Without Gauge 202161
Manufacturer: Kelch
Dennis Kirk Part #: 1834
Kelch Bayonet Vented Gas Tank Cap Without Gauge : Manufacturer part # 202161 - Kelch has produced gas caps and gauges for most of the original equipment manufacturers. Produced to OEM specifications and will fit many brands of snowmobiles old and new. Complete with gaskets to help prevent leaking. 2 3/8 in. ID.. 202161 More than 10 on hand
$12.99Kelch Non Vented Screw-0n Gas Tank Cap with Gauge 202613
Manufacturer: Kelch
Dennis Kirk Part #: 18388
Kelch Non Vented Screw-0n Gas Tank Cap with Gauge: Manufacturer part # 202613 - Kelch has produced gas caps and gauges for most of the original equipment manufacturers. Produced to OEM specifications and will fit many brands of snowmobiles old and new. Complete with gaskets to help prevent leaking. 2 1/8 in. ID x 12 1/2 in. Length.. 202613 More than 10 on hand
$7.99Emgo Metal Fuel Filter 1434460
Manufacturer: Emgo
Dennis Kirk Part #: 180611
Emgo Metal Fuel Filter: Manufacturer part # 1434460 - Universal filter. Metal performance fuel filters have brass filter element, all metal casing and hose clamps.. 1434460 More than 10 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
