|
|
$132.99
Custom Chrome Custom Fender for Wide Glide Front End 13183
Manufacturer: Custom Chrome
Dennis Kirk Part #: H390617
Custom Chrome Custom Fender for Wide Glide Front End: Manufacturer part # 13183 - A custom look for FXWG and Softail, or Narrow Glide with Wide Glide conversion. Can be used with 19 in. or 21 in. front wheels. Unpainted steel fenders with polished aluminum spacer blocks, , Note: Fender must be prefitted before painting, , Dimensions: , Outside width at mounting: 5 7/8", Inside width at mounting: 5 11/16", Contour Length: 40", Straight Length: 29 1/2", Height: 11". 13183
2 on hand
More Info/Options for Custom Chrome Custom Fender for Wide Glide Front End 13183
Front End
|
|
|
|
$779.99
Mid USA +8 in. Wide Style Springer Front End 35221
Manufacturer: Mid USA
Dennis Kirk Part #: 588265
Mid USA +8 in. Wide Style Springer Front End: Manufacturer part # 35221 - Economical alternative to a shock-dampened type Springer. Fully assembled with an in-line top bracket without a built-in rake. The standard length Springer (31 in. measured from top bearing to the axle) is comparable to a standard length FXST front end. 1 in. o.d. steering stem designed for Timken -type bearings. Both rear legs are threaded for right or left brakes. Comes with a 3/4 in. o.d. axle kit including a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used). Measures 9 1/4 in. between rockers. Riser mounts are on 4 3/4 in. centers and threaded 1/2 in.-20. Requires 84-99 wheel (compatible with 3/4 in. o.d. axle). Accessories 59-4785 Handlebar riser and hardware kit for use on 3-1/2 in. centers. H19-3021 GMA front 2-piston brake caliper kit. 35221
2 on hand
More Info/Options for Mid USA +8 in. Wide Style Springer Front End 35221
Front End
|
|
|
|
$693.99
Mid USA +2 in. Wide Style Springer Front End 35213
Manufacturer: Mid USA
Dennis Kirk Part #: 588263
Mid USA +2 in. Wide Style Springer Front End: Manufacturer part # 35213 - Economical alternative to a shock-dampened type Springer. Fully assembled with an in-line top bracket without a built-in rake. The standard length Springer (31 in. measured from top bearing to the axle) is comparable to a standard length FXST front end. 1 in. o.d. steering stem designed for Timken -type bearings. Both rear legs are threaded for right or left brakes. Comes with a 3/4 in. o.d. axle kit including a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used). Measures 9 1/4 in. between rockers. Riser mounts are on 4 3/4 in. centers and threaded 1/2 in.-20. Requires 84-99 wheel (compatible with 3/4 in. o.d. axle). Accessories 59-4785 Handlebar riser and hardware kit for use on 3-1/2 in. centers. H19-3021 GMA front 2-piston brake caliper kit. 35213
1 on hand
More Info/Options for Mid USA +2 in. Wide Style Springer Front End 35213
Front End
|
|
|
|
$736.99
Mid USA +6 in. Wide Style Springer Front End 35215
Manufacturer: Mid USA
Dennis Kirk Part #: 588264
Mid USA +6 in. Wide Style Springer Front End: Manufacturer part # 35215 - Economical alternative to a shock-dampened type Springer. Fully assembled with an in-line top bracket without a built-in rake. The standard length Springer (31 in. measured from top bearing to the axle) is comparable to a standard length FXST front end. 1 in. o.d. steering stem designed for Timken -type bearings. Both rear legs are threaded for right or left brakes. Comes with at 3/4 in. o.d. axle kit including a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used). Measures 9 1/4 in. between rockers. Riser mounts are on 4 3/4 in. centers and threaded 1/2 in.-20. Requires 84-99 wheel (compatible with 3/4 in. o.d. axle). Accessories 59-4785 Handlebar riser and hardware kit for use on 3-1/2 in. centers. H19-3021 GMA front 2-piston brake caliper kit. 35215
1 on hand
More Info/Options for Mid USA +6 in. Wide Style Springer Front End 35215
Front End
|
|
|
|
$693.99
Mid USA -2 in. Wide Style Springer Front End 35211
Manufacturer: Mid USA
Dennis Kirk Part #: 588261
Mid USA -2 in. Wide Style Springer Front End: Manufacturer part # 35211 - Economical alternative to a shock-dampened type Springer. Fully assembled with an in-line top bracket without a built-in rake. The standard length Springer (31" measured from top bearing to the axle) is comparable to a standard length FXST front end. 1" o.d. steering stem designed for Timken -type bearings. Both rear legs are threaded for right or left brakes. Comes with 3/4 in. o.d. axle kit including a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used). Measures 9 1/4 in. between rockers. Riser mounts are on 4 3/4 in. centers and threaded 1/2 in.-20. Requires 84-99 wheel (compatible with 3/4 in. o.d. axle). Accessories 59-4785 Handlebar riser and hardware kit for use on 3-1/2 in. centers. H19-3021 GMA front 2-piston brake caliper kit. 35211
1 on hand
More Info/Options for Mid USA -2 in. Wide Style Springer Front End 35211
Front End
|
|
|
|
$599.99
Mid USA STD 31 in. Wide Style Springer Front End 35212
Manufacturer: Mid USA
Dennis Kirk Part #: 588262
Mid USA STD 31 in. Wide Style Springer Front End: Manufacturer part # 35212 - Economical alternative to a shock-dampened type Springer. Fully assembled with an in-line top bracket without a built-in rake. The standard length Springer (31 in. measured from top bearing to the axle) is comparable to a standard length FXST front end. 1 in. o.d. steering stem designed for Timken -type bearings. Both rear legs are threaded for right or left brakes. Comes with a 3/4 in. o.d. axle kit including a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used). Measures 9 1/4 in. between rockers. Riser mounts are on 4 3/4 in. centers and threaded 1/2"-20. Requires 84-99 wheel (compatible with 3/4 in. o.d. axle). Accessories 59-4785 Handlebar riser and hardware kit for use on 3-1/2 in. centers. H19-3021 GMA front 2-piston brake caliper kit. 35212
3 on hand
More Info/Options for Mid USA STD 31 in. Wide Style Springer Front End 35212
Front End
|
|
|
|
$101.99
Maier Racing ATV Front End 18966
Manufacturer: Maier
Dennis Kirk Part #: 39710
Maier Racing ATV Front End: Manufacturer part # 18966 - Constructed of high-density polyethylene for unsurpassed strength. Designed to fit each model precisely at a fraction of the OEM cost. Racing fenders are aerodynamically designed for less wind resistance and better top speed. NOTE: No mounting hardware included. 18966
1 on hand
More Info/Options for Maier Racing ATV Front End 18966
Front End
|
|
|
|
$365.99
Paul Yaffe Originals Custom Chopper 1 in. Diameter Bar for 46 Degree Front Ends - Chrome 46CHB
Manufacturer: Paul Yaffe Originals
Dennis Kirk Part #: 594301
Paul Yaffe Originals Custom Chopper 1 in. Diameter Bar for 46 Degree Front Ends - Chrome: Manufacturer part # 46CHB - Paul Yaffe Originals believe their products are thefinest and most unique products available on the market. They use only the highest quality materialsand manufacturing practices. Their designs are engineered on world class bikes built by Paul Yaffeand his talented crew. They know their products work because they are tested on their bikes before theyare even considered for production The latest wild designs from the mind of Paul Yaffe. Designed to fit triple trees that have 3.5" center distance mounting holes. Chopper handlebars for 46 front ends are designed to fit front ends with at least a 46° rake and 3.5" centers in the triple trees. Standard Chopper handlebars fit most stock 73-06 models that use risers with 3.5" centers (except Springer Softails).. 46CHB
1 on hand
More Info/Options for Paul Yaffe Originals Custom Chopper 1 in. Diameter Bar for 46 Degree Front Ends - Chrome 46CHB
Front End
|
|
|
|
$168.99
K & L Front End Stand 37-3182
Manufacturer: K & L
Dennis Kirk Part #: 282572
K & L Front End Stand: Manufacturer part # 37-3182 - This 1 3/4" tubular steel frame stand allows complete access for front end repairs (except triple clamp replacement). Holder has three positions. , , NOTE: Do not put bike on front stand before bike is secured on rear stand. Otherwise, bike can be damaged.. 37-3182
2 on hand
More Info/Options for K & L Front End Stand 37-3182
Front End
|
|
|
|
|
|
$89.99
L.A. Sleeve Front End Lowering Kit 0416-0028
Manufacturer: L.A. Sleeve
Dennis Kirk Part #: 583185
L.A. Sleeve Front End Lowering Kit: Manufacturer part # 0416-0028 - Everything you need to drop the front end of your bike by approximately 1 1/2" is included in this complete kit. Increased suspension damping for a smoother ride is provided by all-new front straight-rate spring. , , Included Items: . , 1. (2) Springs. , 2. (2) Pre-loaded spacers. , 3. (2) Top-out spacers. , 4. (4) Washers.. 0416-0028
1 on hand
More Info/Options for L.A. Sleeve Front End Lowering Kit 0416-0028
Front End
|
|
|
|
