|
|
$4702.99
Independent Cycle Inc. Lowlife Right-Side Drive Softail Frame Kit p494822
Manufacturer: Independent Cycle Inc.
Dennis Kirk Part #: 494822
Independent Cycle Inc. Lowlife Right-Side Drive Softail Frame Kit: Manufacturer part # p494822 - Radial bent original frame constructed of DOM tubing with a .157 in./.187 in. wall thickness features a 40 degree neck rake with 7 in. stretch. Machined neck stem takes press-in bearing races; no need for fork cups. Narrowed frame rails for better cornering, even at low ride height; low seat height for lower center of gravity. Triangulated, solid machined top motor mount. One-piece machined transmission plate is 1/2 in. thick. Engine and transmission are centered in chassis for excellent balance. Right-side drive only and accommodates wide tires. Welded-on mount tabs allow 84-99 Softail-style forward controls to be mounted to chassis. Chrome Legend Air Suspension is included and installs flush with the bottom of the frame. Swingarm features triangulated high-strength design, DOM tubing all-radial bends, 1 in. stainless rear axle, flush axle caps with hidden fasteners, two stainless pivot bolts and pivot axis tube, pivot bearings and spacers. Swingarm accommodates 240, 280 or 300mm rear tire with a full-width belt. Features oil tank hidden under transmission for better weight distribution, rubber isolated battery mount and hidden compressor mount as part of the battery mount. Required primary drive sold separately. , , NOTE:, Includes a manufactures statement of origin (MSO), , For primary motor plate and belt kit use part number 20-8577, , This item ships in 3-4 days after the order is placed. p494822
1 on hand
More Info/Options for Independent Cycle Inc. Lowlife Right-Side Drive Softail Frame Kit p494822
Frame Softail
|
|
|
|
$1333.99
Mid USA Softail-Style Frame for Twin Cam 88B Engine 20013
Manufacturer: Mid USA
Dennis Kirk Part #: 492094
Mid USA Softail-Style Frame for Twin Cam 88B Engine: Manufacturer part # 20013 - Standard width. Backbones made from 1 1/2 inch square steel tubing with .188 inch wall thickness for maximum strength. Choice of OEM 30 degree rake or 35 degree rake - 49-2095. TIG welded in high-stress areas. Fully machined rear swingarm support plates for OEM look. Do not include provision for fork lock. Use Softail 84-88 steering fork head cups and races found in Suspension section. Designed for use with 00-06 Softail components. Include Manufacturer's Statement of Origin (MSO). , , Item ships 3-4 days after order is placed.. 20013
1 on hand
More Info/Options for Mid USA Softail-Style Frame for Twin Cam 88B Engine 20013
Frame Softail
|
|
|
|
$1333.99
Mid USA Softail-Style Frame for Twin Cam 88B Engine 20014
Manufacturer: Mid USA
Dennis Kirk Part #: 492095
Mid USA Softail-Style Frame for Twin Cam 88B Engine: Manufacturer part # 20014 - Standard width. Backbones made from 1 1/2 in. square steel tubing with .188 in. wall thickness for maximum strength. 35 degree rake. TIG welded in high-stress areas. Fully machined rear swingarm support plates for OEM look. Do not include provision for fork lock. Use Softail 84-88 steering fork head cups and races found in Suspension Section. Designed for use with 00-06 Softail components. Include Manufacturer's Statement of Origin (MSO). For OEM 30 degree rake use 49-2094. , , NOTE: This item ships in 3-4 days after the order is placed.. 20014
Expected Soon
More Info/Options for Mid USA Softail-Style Frame for Twin Cam 88B Engine 20014
Frame Softail
|
|
|
|
$892.99
Mid USA OE-Style Replacement Frame For Softail 20015
Manufacturer: Mid USA
Dennis Kirk Part #: H6620015
Mid USA OE-Style Replacement Frame For Softail: Manufacturer part # 20015 - Create your own Softail model using 86-99 components. For strength, this frame's backbone is made of 1 1/2 in. o.d., .188 in. wall thickness DOM tubing. The 1 1/8 in. o.d. tubing has a .120 in. wall thickness that has been TIG welded on all-new hardened and ground tooling for the most accurate fit ever. Made to accept a Big Twin Evolution engine with up to .200 in. taller cylinders, a 5-speed solid-mount tranmission, rear belt drive and flatside Fat Bob gas tanks. A weld-on bracket kit complete with oil filter mount, rear brake master cylinder mount, electrical connection bracket and highway bar/clutch cable bracket is also supplied. Supplied with Manufacturer's Statement of Origin. OE rake and stretch, replaces OEM NO. 47008-89A.. 20015
3 on hand
More Info/Options for Mid USA OE-Style Replacement Frame For Softail 20015
Frame Softail
|
|
|
|
|
|
|
|
$14.99
Emgo Eagle License Plate Frame 8642650
Manufacturer: Emgo
Dennis Kirk Part #: H49043
Emgo Eagle License Plate Frame: Manufacturer part # 8642650 - Die-cast license plate frames in chrome or gold finish. Each contains a three-dimensional eagle emblem centered on top of the frame. NOTE: Outside Dimensions: 7 1/4 in. x 5 in.. Window Size: 6 7/16 in. x 3 5/16 in.. Mounting Hole Center: 5 3/4 in. x 2 7/8 in... 8642650
4 on hand
More Info/Options for Emgo Eagle License Plate Frame 8642650
Frame Softail
|
|
|
|
|
|
$59.99
Kuryakyn Curved License Plate Frame 9157
Manufacturer: Kuryakyn
Dennis Kirk Part #: 493004
Kuryakyn Curved License Plate Frame: Manufacturer part # 9157 - Puts the finishing touch on Kuryakyns Tombstone taillights. Accepts any 4" x 7" license plate. Two-piece design encapsulates the plate and looks great from any angle. Fastens neatly to the existing holes on the Tombstone base plate. License plate outside dimensions: 7 1/4 in. x 4 1/4 in., window size 6 1/4 in. x 3 3/8 in. , mounting hole center distance 5 3/4 in. x 2 3/4 in.. , , This is a license plate frame with backing plate and mount for use with tombstone taillight 21-1253. 9157
1 on hand
More Info/Options for Kuryakyn Curved License Plate Frame 9157
Frame Softail
|
|
|
|
$59.99
Kuryakyn Curved Laydown License Plate Mount with Frame 9171
Manufacturer: Kuryakyn
Dennis Kirk Part #: 493005
Kuryakyn Curved Laydown License Plate Mount with Frame: Manufacturer part # 9171 - A major improvement over the stock plate mount. Curved frame mates cleanly with the backing plate for a custom, finished look. Fits any H-D model with the standard 3-bolt mounted license plate bracket and also Honda VTX models. Dimensions: Fits 4 in. x 7 in. license plates Outside diameter: 4 3/8 in. H x 7 1/4 in. L Window size: 6 in. x 3 3/16 in. Mounting hole center distance 5 3/4 in. x 2 3/4 in.. 9171
More than 10 on hand
More Info/Options for Kuryakyn Curved Laydown License Plate Mount with Frame 9171
Frame Softail
|
|
|
|
|
|
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
