|
|
$1579.99
H491002 Chopper Guys FXR Frame Kit
Dennis Kirk Part #: H491002
H491002 Chopper Guys FXR Frame Kit: Manufacturer part # FRMFGXF - Rubber mount like stock. Stronger and lighter than stock. Pro-Street frames are available with our with out a stock-type swingarm; both require stock rear axle(must purchase separately). Frame weighs 50 pounds and swingarm weights 15 pounds. Pro-Street specs 2 in. stretch, 33 in. rake, 5/8 in offset. The standard FXR frames has 1 in. stretch, 28 in. rake. Accepts stock FXR accessories. Swingarms available separately. Brake adapter required to mount to OEM brake caliper on Chopper Guys steel billet swingarm. Made in the U.S.A.. , , This item ships 3-4 days after the order is placed.. FRMFGXF
1 on Hand
More Info/Options for H491002 Chopper Guys FXR Frame Kit
|
|
|
|
$7599.99
Independent Cycle Inc. Hardlife Right Side Drive Rigid Frame Kit with Forward Controls 493097
Dennis Kirk Part #: 493097
Independent Cycle Inc. Hardlife Right Side Drive Rigid Frame Kit with Forward Controls 493097: Radial bent original frame constructed of DOM tubing with a .157/.187 wall thickness features a 40° neck rake with 7" stretch. Machined neck stem takes press-in bearing races; no need for fork cups. Triangulated, solid machined top motor mount. Machined transmission plate is 1/2" thick. Engine and transmission are designed on the centerline of the frame. Accepts Evo or Twin Cam A motors when used with adapter plate PART NO. 14-9362. Works with 240, 280 or 300mm rear tire using a wide belt or chain. Primary features an extended-length one-piece billet backing plate and comes with both pulleys, 3" Gates belt and Rivera Pro Clutch pack, and forward controls including master cylinder. A 1" 1144 stressproof axle, flush axle caps, neck bearings, hidden rubber-mounted oil tank, rubber-mounted battery box and stainless steel splash shield also included. Includes Manufacturers Statement of Origin (MSO). , , This item ships 3-4 business days after order is placed.
1 on Hand
More Info/Options for Independent Cycle Inc. Hardlife Right Side Drive Rigid Frame Kit with Forward Controls 493097
|
|
|
|
$3277.99
Independent Cycle Inc. Hardlife Right-Side Drive Rigid Frame Kit 494823
Dennis Kirk Part #: 494823
Independent Cycle Inc. Hardlife Right-Side Drive Rigid Frame Kit 494823: Radial bent original frame constructed of DOM tubing with a .157 in./.187 in. wall thickness features a 40 degree neck rake with 7" stretch. Machined neck stem takes press-in bearing races; no need for fork cups. Narrowed frame rails for better cornering, even at low ride height; low seat height for lower center of gravity. Triangulated, solid machined top motor mount. One-piece machined transmission plate is 1/2 in. thick. Engine and transmission are centered in chassis for excellent balance. Right-side drive only and accommodates wide tires. Welded-on mount tabs allow 84-99 Softail-style forward controls to be mounted to chassis. Features rear 1 in. stainless axle, oil tank hidden under transmission for better weight distribution, rubber isolated battery mount, hidden compressor mount as part of the battery mount and flush axle caps with hidden fasteners. Required primary drive sold separately. NOTE: Includes a manufactures statement of origin (MSO) NOTE: For primary motor plate and belt kit use part number 494824.
1 on Hand
More Info/Options for Independent Cycle Inc. Hardlife Right-Side Drive Rigid Frame Kit 494823
|
|
|
|
$4702.99
Independent Cycle Inc. Lowlife Right-Side Drive Softail Frame Kit 494822
Dennis Kirk Part #: 494822
Independent Cycle Inc. Lowlife Right-Side Drive Softail Frame Kit 494822: Radial bent original frame constructed of DOM tubing with a .157 in./.187 in. wall thickness features a 40 degree neck rake with 7 in. stretch. Machined neck stem takes press-in bearing races; no need for fork cups. Narrowed frame rails for better cornering, even at low ride height; low seat height for lower center of gravity. Triangulated, solid machined top motor mount. One-piece machined transmission plate is 1/2 in. thick. Engine and transmission are centered in chassis for excellent balance. Right-side drive only and accommodates wide tires. Welded-on mount tabs allow 84-99 Softail-style forward controls to be mounted to chassis. Chrome Legend Air Suspension is included and installs flush with the bottom of the frame. Swingarm features triangulated high-strength design, DOM tubing all-radial bends, 1 in. stainless rear axle, flush axle caps with hidden fasteners, two stainless pivot bolts and pivot axis tube, pivot bearings and spacers. Swingarm accommodates 240, 280 or 300mm rear tire with a full-width belt. Features oil tank hidden under transmission for better weight distribution, rubber isolated battery mount and hidden compressor mount as part of the battery mount. Required primary drive sold separately. NOTE: Includes a manufactures statement of origin (MSO) NOTE: For primary motor plate and belt kit use part number 494824.
1 on Hand
More Info/Options for Independent Cycle Inc. Lowlife Right-Side Drive Softail Frame Kit 494822
|
|
|
|
|
|
|
|
|
|
|
|
$2466.99
Rear Doherty 200mm Fat Tire Conversion Kit-Standard Light Kit
Dennis Kirk Part #: 492493
Rear Doherty 200mm Fat Tire Conversion Kit-Standard Light Kit: Manufacturer part # 1100 - Allows installation of a 200x18 series tire on any 87-05 Softail using the factory swingarm. Converts bike to a rear chain drive with an approximate installation time of 8-10 hours. Rear fenders accept stock seat pan shapes and require removal of factory fender strut rails. Use with OEM taillight or LED light kit, which incorporates turn signal function in the taillight. Uses 3/4 inch axle. , , Other aftermarket and OEM rear wheels will not fir in conjunction with this kit. All wheel assemblies use 00-05 sealed wheel bearings and will require 00-05 style rotors. Item ships 3-4 business days after order is placed.. 1100
1 on Hand
More Info/Options for Rear Doherty 200mm Fat Tire Conversion Kit-Standard Light Kit
|
|
|
|
$2792.99
Doherty 200mm Fat Tire Conversion Kit-LED Light Kit 492494
Dennis Kirk Part #: 492494
Doherty 200mm Fat Tire Conversion Kit-LED Light Kit 492494: Manufacturer part # 1199L - Allows installation of a 200x18 series tire on any 87-05 Softail using the factory swingarm. Converts bike to a rear chain drive with an approximate installation time of 8-10 hours. Rear fenders accept stock seat pan shapes and require removal of factory fender strut rails. Use with OEM taillight or LED light kit, which incorporates turn signal function in the taillight. Uses 3/4 inch axle. , , Other aftermarket and OEM rear wheels will not fit in conjunction with this kit. All wheel assemblies use 00-05 sealed wheel bearings and will require 00-05 style rotors. This item ship 3-4 business days after order is placed. 1199L
1 on Hand
More Info/Options for Doherty 200mm Fat Tire Conversion Kit-LED Light Kit 492494
|
|
|
|
$82.95
Jet Kit/Each Dynojet Stage 3 Jet Kit
Dennis Kirk Part #: 172022
Jet Kit/Each Dynojet Stage 3 Jet Kit: Manufacturer part # MQ4320 - Dynojet offers a wide range of kits to fit most applications. Each kit is precisely engineered to provide a simple and cost-effective solution for your carburetion problems. Several stages of kits available for off-road dirt bikes; one kit specifically designed for ATV applications available. , STAGE 3 KITS Power increases up to 10-15 percent. May compromise driveability in short-stroke high RPM motors. For dirt bikes with stock or modified engines using individual air filters and a stock or aftermarket exhaust. Individual filters and jetting may not improve performance on certain modern engine and airbox designs -- there are no Stage 3 kits in these instances.. MQ4320
2 on Hand
More Info/Options for Jet Kit/Each Dynojet Stage 3 Jet Kit
|
|
|
|
$2792.99
Doherty 200mm Fat Tire Conversion Kit-LED Light Kit 492495
Dennis Kirk Part #: 492495
Doherty 200mm Fat Tire Conversion Kit-LED Light Kit 492495: Manufacturer part # 1100L - Allows installation of a 200x18 series tire on any 87-05 Softail using the factory swingarm. Converts bike to a rear chain drive with an approximate installation time of 8-10 hours. Rear fenders accept stock seat pan shapes and require removal of factory fender strut rails. Use with OEM taillight or LED light kit, which incorporates turn signal function in the taillight. Uses 3/4 inch axle. , , Other aftermarket and OEM rear wheels will not fit in conjunction with this kit. All wheel assemblies use 00-05 sealed wheel bearings and will require 00-05 style rotors. This item ship 3-4 business days after order is placed. 1100L
1 on Hand
More Info/Options for Doherty 200mm Fat Tire Conversion Kit-LED Light Kit 492495
|
|
