$36.99Show Chrome Face Mount Turn Signal Visors 1-243
Manufacturer: Show Chrome
Dennis Kirk Part #: 499968
Show Chrome Face Mount Turn Signal Visors: Manufacturer part # 1-243 - Give your bike a custom look with these teardrop visors. Mount easily to stock turn signals with double-sided adhesive tape. Sold in pairs.. 1-243 8 on hand
$41.99Chris Products Stem Mount Turn Signal w/Clear Lens and Red LED Bulb p212648
Manufacturer: Chris Products
Dennis Kirk Part #: 212648
Chris Products Stem Mount Turn Signal w/Clear Lens and Red LED Bulb: Manufacturer part # p212648 - Feature dual-function, sealed LED circuit boards and 100,000-hour-rated LED bulbs. Require 80% less wattage than other LEDs. Increased 42" wiring length. Meet or exceed DOT Specification SAE108 for use on the rear of a motorcycle. , , Note: Requires 80% less wattage than an incandescent bulb; not other LED bulbs. This is a hollow stem mount style light with 5/16 in.-18 threads, designed for the wires to run through the mounting stem. For the same light in standard stem mount, use 212647; and the same light in a rear bracket mount design, use 213627. LED lights are red when lit or clear when off.. p212648 2 on hand
$41.99Chris Products Stem Mount Turn Signal w/Clear Lens and Amber LED Bulb p212649
Manufacturer: Chris Products
Dennis Kirk Part #: 212649
Chris Products Stem Mount Turn Signal w/Clear Lens and Amber LED Bulb: Manufacturer part # p212649 - Feature dual-function, sealed LED circuit boards and 100,000-hour-rated LED bulbs. Require 80% less wattage than other LEDs. Increased 42" wiring length. Meet or exceed DOT Specification SAE108 for use on the rear of a motorcycle. , , Note: Requires 80% less wattage then an incandescent bulb; not other LED bulbs. This is a hollow stem mount style light with 5/16 in.-18 threads, designed for the wires to run through the mounting stem. For the same light in standard stem mount, use 212646. LED lights are amber when lit or clear when off. p212649 1 on hand
$41.99Chris Products Rear Stem Mount Turn Signal w/Clear Lens and Red LED Bulb p213627
Manufacturer: Chris Products
Dennis Kirk Part #: 213627
Chris Products Rear Stem Mount Turn Signal w/Clear Lens and Red LED Bulb: Manufacturer part # p213627 - Feature dual-function, sealed LED circuit boards and 100,000-hour-rated LED bulbs. Require 80% less wattage than other LEDs. Increased 42" wiring length. Meet or exceed DOT Specification SAE108 for use on the rear of a motorcycle. , , Note: Requires 80% less wattage then an incandescent bulb; not other LED bulbs. This is a rear bracket mount style light with 5/16 in.-18 threads, designed for the wires to run through the mounting bracket similar to the original. For the same light in a 5/16 in.-18 stem mount design, use 212647; for the same light in a 5/16 in.-18 hollow stem mount design, use 212648. LED lights are red when lit or clear when off. p213627 1 on hand
$41.99Chris Products Stem Mount Turn Signal w/Clear Lens and Red LED Bulb p212647
Manufacturer: Chris Products
Dennis Kirk Part #: 212647
Chris Products Stem Mount Turn Signal w/Clear Lens and Red LED Bulb: Manufacturer part # p212647 - Feature dual-function, sealed LED circuit boards and 100,000-hour-rated LED bulbs. Require 80% less wattage than other LEDs. Increased 42" wiring length. Meet or exceed DOT Specification SAE108 for use on the front of a motorcycle. , , Note: Red lights should only be used on the rear, not front. LED lights are red when lit or clear when off. For amber LEDs and front use, use 212646. Requires 80% less wattage then an incandescent bulb; not other LED bulbs. Mounts to 5/16 in. threaded standard Harley-Davidson stems. p212647 3 on hand
$41.99Chris Products Stem Mount Turn Signal w/Clear Lens and Amber LED Bulb p212646
Manufacturer: Chris Products
Dennis Kirk Part #: 212646
Chris Products Stem Mount Turn Signal w/Clear Lens and Amber LED Bulb: Manufacturer part # p212646 - Feature dual-function, sealed LED circuit boards and 100,000-hour-rated LED bulbs. Require 80% less wattage than other LEDs. Increased 42" wiring length. Meet or exceed DOT Specification SAE108 for use on the front of a motorcycle. , , Note: Requires 80% less wattage then an incandescent bulb; not other LED bulbs. LED lights are amber when lit or clear when off. Mounts to 5/16 in.-18 threaded standard Harley-Davidson stems. p212646 4 on hand
$39.99Kuryakyn Top Driving Light or Turn Signal Mounts 2282
Manufacturer: Kuryakyn
Dennis Kirk Part #: 213780
Kuryakyn Top Driving Light or Turn Signal Mounts: Manufacturer part # 2282 - Add driving lights, stylish custom mount turn signals, or both with these little mounts. Position Large or Small Silver Bullets in front of the lower triple tree and be amazed at the new streamlined look of your VTX. Top mounts bolt directly to the headlight mounting bolt on top of the lower triple tree Included Items: , 1. (1) Right mount bracket, 2. (1) Left mount bracket, 3. (2) 5/16" External tooth lock washer, 4. (1) Installation instructions. Requires: Silver Bullets P/N H22069, H22070, H21559 or similar product that mounts with 5/16 mounting hole Suggested: Use P/N 211224 Universal Wiring and Relay Kit when installing Halogen Silver Bullets Note: Will not work with windshields that run along the side of headlight or with Kuryakyn driving light bar (p/n 505472). 2282 1 on hand
$79.95Harley-Davidson Lighted Rear Turn Signal Mount Kit 68624-04A
Manufacturer: Harley-Davidson
Dennis Kirk Part #: 212533
Harley-Davidson Lighted Rear Turn Signal Mount Kit: Manufacturer part # 68624-04A - Designed to accent the bullet-style turn signal housing, this airfoil-shaped Turn Signal Mount Kit features two rows of brilliant LED lamps that produce an incredible amount of light. The turn signal mounts operate as attention-getting supplemental red rear lighting when the ignition is on, and the fast-acting LED increase in intensity when the brakes are applied. The kit is designed as a direct replacement for the Original Equipment turn signal mount. INCLUDED ITEMS: Two support and LED assembly rear turn signal. One Y harness. Four cable ties. Two 5/16 in.-18 x 2.75 in. bolts. One instruction sheet. NOTE: Will not fit models equipped with Saddlebags or rear detachable docking hardware kits. 68624-04A 2 on hand
$19.95Drag Specialties Turn Signal Mounting Bracket 20200279
Manufacturer: Drag Specialties
Dennis Kirk Part #: 212272
Drag Specialties Turn Signal Mounting Bracket: Manufacturer part # 20200279 - Replacement brackets for part numbers 212267, 212268, 212270 and 212271.. 20200279 1 on hand
$19.95Drag Specialties Short Turn Signal Mounts for 39mm/49mm Forks 20200347
Manufacturer: Drag Specialties
Dennis Kirk Part #: 212839
Drag Specialties Short Turn Signal Mounts for 39mm/49mm Forks: Manufacturer part # 20200347 - Moves turn signal closer to the bike for a clean, custom look. Chrome spacers included for when mounts are installed on 49mm fork tubes. For use with FXR 87-00, Dyna Glide 91-05 and XL 87-09 models fitted w/ 39mm forks and turn signals mounted on the triple trees; Dyna Glide 06-07 and V-Rod 02-09 w/ 49mm forks and front signals mounted on the triple trees. Sold in pairs.. 20200347 More than 10 on hand
$39.95Baron Custom Accessories Rear Turn Signal Mount BA317100
Manufacturer: Baron Custom Accessories
Dennis Kirk Part #: 214062
Baron Custom Accessories Rear Turn Signal Mount: Manufacturer part # BA317100 - This polished stainless steel bracket allows you to rid your fender of the ugly stock turn signals and add custom marker lights to your bike quickly and easily. Bracket installs in existing fender holes below stock taillight. Accepts most aftermarket marker lights, such as our Bullet Marker Lights (sold separately). All necessary mounting hardware is supplied. , , Included Items:. , 1. (1) Mounting bracket. , 2. (2) M6 nuts. , 3. (2) M6 washers.. BA317100 2 on hand
$16.99K & S LED Mini Adhesive Flush-Mount Chrome/Amber Marker Lights 259503
Manufacturer: K & S
Dennis Kirk Part #: 210888
K & S LED Mini Adhesive Flush-Mount Chrome/Amber Marker Lights: Manufacturer part # 259503 - Two-sided adhesive or mounting bolt and nut on the bottom of the light housing mount these marker lights flush against your motorcycle. Include 4 ft of wire. Do not use where DOT lighting is required. Waterproof lights measure 2.5 in. L x 1 in. W x 3/4 in. H and weigh just .6 oz... 259503 3 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
