Flip Front

$218.99 J&M Corporation HS-ECD584 Series Headset for Flip-Front Helmets HSECD584FL
Manufacturer: J&M Corporation
Dennis Kirk Part #: 407246
J&M Corporation HS-ECD584 Series Headset for Flip-Front Helmets: Manufacturer part # HSECD584FL - State-of-the-art headsets feature the new AeroMike III miniature boom microphone with Dual Mode technology that allows one headset to function with any factory-installed motorcycle audio system simply by interchanging the lower-section hook-up cord. Also feature high-fidelity helmet speakers in stereo. Upper section of two-piece hook-up cord included with headset; lower section must be purchased separately (06-08 Ultra models)-407350, (98-05 Ultra)-H40214, (89-97 Ultra)-H402040, (J&M 6 pin)-407147. Headsets fit all years of Harley audio systems including Ultras from 89-Up. , NOTE: For most flip-front style helmets Hook-Up Cords and Accessories Lower-section hook-up cord for connection to 89-97 H-D 5-pin audio systems: part number H40204 Lower-section hook-up cord for connection to 99-09 J&M 6-pin audio systems: part number 408254 Lower section hook-up cord for connection to 98-09 H-D 7-pin audio systems Replacement right angle upper cord for ECD584 series: part number 407252 Windsock kit for AeroMike III miniature microphones: part number 408263. HSECD584FL
2 on hand

More Info/Options for J&M Corporation HS-ECD584 Series Headset for Flip-Front Helmets HSECD584FL

Flip Front

$606.99 GMA Engineering Custom Billet Aluminum Front Brake Caliper 200FDD
Manufacturer: GMA Engineering
Dennis Kirk Part #: 198135
GMA Engineering Custom Billet Aluminum Front Brake Caliper: Manufacturer part # 200FDD - Billet aluminum dual-disc caliper set with a fin design and a satin finish. Require the factory 11/16 in. bore (84 and later) or the GMA 3/4 in. handlebar master cylinder. Brake pads included. Made in the U.S.A.. NOTE: Not recommended for use with imported stainless steel rotors NOTE: When installing new calipers, always check spoke-to-caliper clearance. 200FDD
1 on hand

More Info/Options for GMA Engineering Custom Billet Aluminum Front Brake Caliper 200FDD

Flip Front

$303.99 GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each GMA200F
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191681
GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each: Manufacturer part # GMA200F - Clear anodized billet aluminum construction with fin design. Chrome finish available in some styles. Calipers available in 2- or 4-piston designs for various H-D models (including rigid frames). 5/8" bore master cylinder required for all GMA single-disc applications using a 2- or 4-piston caliper. Factory 11/16" bore (1984 & later) or GMA 3/4" handlebar master cylinder required for all front dual-disc applications using a 2- or 4-piston caliper. Brake pads included. Made in the U.S.A.. , NOTE: The old style Wagner and Kelsey-Hayes (die cast aluminum OEM) on rear applications have a 3/4" bore master cylinder and WILL NOT WORK CORRECTLY., NOTE: Not recommended for use with imported stainless steel rotors., NOTE: When installing new calipers, always check spoke-to-caliper clearance.. GMA200F
2 on hand

More Info/Options for GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each GMA200F

Flip Front

$306.99 GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each GMA200S
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191680
GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each: Manufacturer part # GMA200S - Clear anodized billet aluminum construction with fin design. Chrome finish available in some styles. Calipers available in 2- or 4-piston designs for various H-D models (including rigid frames). 5/8" bore master cylinder required for all GMA single-disc applications using a 2- or 4-piston caliper. Factory 11/16" bore (1984 & later) or GMA 3/4" handlebar master cylinder required for all front dual-disc applications using a 2- or 4-piston caliper. Brake pads included. Made in the U.S.A.. , NOTE: The old style Wagner and Kelsey-Hayes (die cast aluminum OEM) on rear applications have a 3/4" bore master cylinder and WILL NOT WORK CORRECTLY., NOTE: Not recommended for use with imported stainless steel rotors., NOTE: When installing new calipers, always check spoke-to-caliper clearance.. GMA200S
1 on hand

More Info/Options for GMA Engineering Billet Aluminum Front Brake Caliper, Sold Each GMA200S

Flip Front

$666.99 GMA Engineering Billet Aluminum Front Brake Caliper, Pair GMA400FDD
Manufacturer: GMA Engineering
Dennis Kirk Part #: H193020
GMA Engineering Billet Aluminum Front Brake Caliper, Pair: Manufacturer part # GMA400FDD - Clear anodized billet aluminum construction with fin design. Chrome finish available in some styles. Calipers available in 2- or 4-piston designs for various H-D models (including rigid frames). 5/8" bore master cylinder required for all GMA single-disc applications using a 2- or 4-piston caliper. Factory 11/16" bore (1984 & later) or GMA 3/4" handlebar master cylinder required for all front dual-disc applications using a 2- or 4-piston caliper. Brake pads included. Made in the U.S.A.. , NOTE: The old style Wagner and Kelsey-Hayes (die cast aluminum OEM) on rear applications have a 3/4" bore master cylinder and WILL NOT WORK CORRECTLY, NOTE: Not recommended for use with imported stainless steel rotors, NOTE: When installing new calipers, always check spoke-to-caliper clearance. GMA400FDD
2 on hand

More Info/Options for GMA Engineering Billet Aluminum Front Brake Caliper, Pair GMA400FDD

Flip Front

$334.99 GMA Engineering Millenium Series 4-Piston Front Single-Disc Caliper p197304
Manufacturer: GMA Engineering
Dennis Kirk Part #: 197304
GMA Engineering Millenium Series 4-Piston Front Single-Disc Caliper: Manufacturer part # p197304 - GMA's mission is to provide high performance, high quality products, priced competitively for the ultimate customer satisfaction of the Harley-Davidson motorcyle rider and enthusiast. Add style and shine to a high-visibility area. Made of high-quality 6061 T-6S aluminum. Made in the U.S.A... p197304
1 on hand

More Info/Options for GMA Engineering Millenium Series 4-Piston Front Single-Disc Caliper p197304

Flip Front

$458.99 GMA Engineering Custom Billet Aluminum Front Caliper GMA400FC
Manufacturer: GMA Engineering
Dennis Kirk Part #: H19260
GMA Engineering Custom Billet Aluminum Front Caliper: Manufacturer part # GMA400FC - Clear anodized billet aluminum construction with fin design. Chrome finish. 5/8in. Bore master cylinder required for all GMA single-disc applications using a two or four-piston caliper. Brake pads included. Made in the U.S.A.. NOTE: Not recommended for use with imported stainless steel rotors. NOTE: When installing new calipers, always check spoke-to-caliper clearance.. GMA400FC
1 on hand

More Info/Options for GMA Engineering Custom Billet Aluminum Front Caliper GMA400FC

Flip Front

$427.99 Performance Machine Chromed Differential Bore 4-Piston Front Caliper, Right-Hand 00532920CH
Manufacturer: Performance Machine
Dennis Kirk Part #: H19211
Performance Machine Chromed Differential Bore 4-Piston Front Caliper, Right-Hand: Manufacturer part # 00532920CH - Calipers have differential bore pistons with dual-pad design. Differential bore pistons apply different forces at the leading and trailing edge of the pad to ensure long life. Utilizes the 137 x 4B caliper with pads. Designed for 11.5 in. disc. Made in the U.S.A.. , Will not fit XL models with wire rims.. 00532920CH
1 on hand

More Info/Options for Performance Machine Chromed Differential Bore 4-Piston Front Caliper, Right-Hand 00532920CH

Flip Front

$474.99 Performance Machine Chrome One-Piece Six-Piston Front Left Caliper For 13 in. Rotor p1900291
Manufacturer: Performance Machine
Dennis Kirk Part #: 1900291
Performance Machine Chrome One-Piece Six-Piston Front Left Caliper For 13 in. Rotor: Manufacturer part # p1900291 - Dual-discs need both a left and a right caliper. Work with Performance Machine rotors or stock rotors. 112 x 6B caliper with pads.. p1900291
1 on hand

More Info/Options for Performance Machine Chrome One-Piece Six-Piston Front Left Caliper For 13 in. Rotor p1900291

Flip Front

$427.99 Performance Machine Chromed Differential Bore 4-Piston Front Caliper, Left-Hand 00532919CH
Manufacturer: Performance Machine
Dennis Kirk Part #: H19208
Performance Machine Chromed Differential Bore 4-Piston Front Caliper, Left-Hand: Manufacturer part # 00532919CH - Calipers have differential bore pistons with dual-pad design. Differential bore pistons apply different forces at the leading and trailing edge of the pad to ensure long life. Utilizes the 137 x 4B caliper with pads. Designed for 11.5 in. disc. Made in the U.S.A.. , Will not fit XL models with wire rims.. 00532919CH
2 on hand

More Info/Options for Performance Machine Chromed Differential Bore 4-Piston Front Caliper, Left-Hand 00532919CH

Flip Front

$460.99 Performance Machine 4-Piston Front Caliper Kit 12300017CH
Manufacturer: Performance Machine
Dennis Kirk Part #: 196967
Performance Machine 4-Piston Front Caliper Kit: Manufacturer part # 12300017CH - When you want braking performance, look to the number one name in custom brake calipers. Precision-machined from billet aluminum. Powerful, positive stopping power from 4-piston dual-action caliper design. Made in the U.S.A.. NOTE: Fits models with 11.5 inch rotors (1.25 X 4S caliper). 12300017CH
1 on hand

More Info/Options for Performance Machine 4-Piston Front Caliper Kit 12300017CH

Flip Front

$427.99 Performance Machine Chromed Left 4-Piston Front Caliper 00532915CH
Manufacturer: Performance Machine
Dennis Kirk Part #: H19214
Performance Machine Chromed Left 4-Piston Front Caliper: Manufacturer part # 00532915CH - Calipers have differential bore pistons with dual-pad design. Differential bore pistons apply different forces at the leading and trailing edge of the pad to ensure long life. Dual front disc applications require a left and right caliper. Designed for 11.5in. disc . Utilizes the 137 x 4B caliper. Made in the U.S.A.. Not for models with spoke wheels. 00532915CH
1 on hand

More Info/Options for Performance Machine Chromed Left 4-Piston Front Caliper 00532915CH

Flip Front

Flip Front