Fender Protector

$16.99 Dowco Guardian Fender Protector-Wide Fender 5012200
Manufacturer: Dowco
Dennis Kirk Part #: 492127
Dowco Guardian Fender Protector-Wide Fender: Manufacturer part # 5012200 - Lightweight fabric protectors that prevent dents and scratches when the bike is being worked on. Scratch pad for additional protection.. 5012200
4 on hand

More Info/Options for Dowco Guardian Fender Protector-Wide Fender 5012200

Fender Protector

$14.99 Dowco Guardian Fender Protector-Narrow Fenders 5012100
Manufacturer: Dowco
Dennis Kirk Part #: 492126
Dowco Guardian Fender Protector-Narrow Fenders: Manufacturer part # 5012100 - Lightweight fabric protectors that prevent dents and scratches when the bike is being worked on. Scratch pad for additional protection.. 5012100
More than 10 on hand

More Info/Options for Dowco Guardian Fender Protector-Narrow Fenders 5012100

Fender Protector

$309.99 Sumax Street Sweeper Rear Fender 8620
Manufacturer: Sumax
Dennis Kirk Part #: 391322
Sumax Street Sweeper Rear Fender: Manufacturer part # 8620 - Made from space-age materials that are lighter and stronger than any fiberglass. Not predrilled, so you can put them in any stance you want. Glassed-in convoluted tubing makes it simple and easy to wire the taillight like a pro. Prime and paint with minimal prep work. Made in the U.S.A.. , , Must be pre-fitted before painting.. 8620
1 on hand

More Info/Options for Sumax Street Sweeper Rear Fender 8620

Fender Protector

$239.99 Sumax 16 in. Street Sweeper Wide Glide Front Fender 8625
Manufacturer: Sumax
Dennis Kirk Part #: 391321
Sumax 16 in. Street Sweeper Wide Glide Front Fender: Manufacturer part # 8625 - Made of high-quality fiberglass. Not pre-drilled; mount in custom position. Wide Glide-style front fender is 6 1/4 in. wide. Rear fenders feature glassed-in conduit for running wires. Just needs primer and paint. Made in the U.S.A.. Note: Fender must be prefitted before painting.. 8625
1 on hand

More Info/Options for Sumax 16 in. Street Sweeper Wide Glide Front Fender 8625

Fender Protector

$45.95 Drag Specialties Large Chrome Eagle Head with Lights Fender Ornament DS287553
Manufacturer: Drag Specialties
Dennis Kirk Part #: H50022
Drag Specialties Large Chrome Eagle Head with Lights Fender Ornament: Manufacturer part # DS287553 - Choose from all chrome or chrome with a gold head-H50023. Each is available with eyes that light up. Die-cast in two different sizes: 1 1/2 in. high and 2 1/2 in. high. Made to fit most front fenders. Gasket and mounting hardware are included. , NOTE: For replacement bulb order 22-276. DS287553
1 on hand

More Info/Options for Drag Specialties Large Chrome Eagle Head with Lights Fender Ornament DS287553

Fender Protector

$58.95 Drag Specialties Large Chrome/Gold Eagle Head with Lights Fender Ornament DS287552
Manufacturer: Drag Specialties
Dennis Kirk Part #: H50023
Drag Specialties Large Chrome/Gold Eagle Head with Lights Fender Ornament: Manufacturer part # DS287552 - Choose from all chrome-H50022 or chrome with a gold head. Each is available with eyes that light up. Die-cast in two different sizes: 1 1/2 in. high and 2 1/2 in. high. Made to fit most front fenders. Gasket and mounting hardware are included. , NOTE: For replacement bulb order 22-276. DS287552
2 on hand

More Info/Options for Drag Specialties Large Chrome/Gold Eagle Head with Lights Fender Ornament DS287552

Fender Protector

$214.99 Russ Wernimont Designs 6.25 in. Wide Custom Rambler Front Fender for 18 in. Wheels 14010150
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392585
Russ Wernimont Designs 6.25 in. Wide Custom Rambler Front Fender for 18 in. Wheels: Manufacturer part # 14010150 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. 14010150
2 on hand

More Info/Options for Russ Wernimont Designs 6.25 in. Wide Custom Rambler Front Fender for 18 in. Wheels 14010150

Fender Protector

$274.99 Russ Wernimont Designs Maverick 9 in. Wide Wernimont Rear Fender for Swingarm Frames DS-380324
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39631
Russ Wernimont Designs Maverick 9 in. Wide Wernimont Rear Fender for Swingarm Frames: Manufacturer part # DS-380324 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience. With a passion for design along with pride of craftsmanship, Russ Wernimont Designs is engineering some of the most in demand Harley-Davidson aftermarket parts in the industry; once again setting new standards in custom fabrication Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380324
1 on hand

More Info/Options for Russ Wernimont Designs Maverick 9 in. Wide Wernimont Rear Fender for Swingarm Frames DS-380324

Fender Protector

CLEARANCE!
Was: $208.95
Now: $125.37
Russ Wernimont Designs 5.5 in. Wernimont Custom Outlaw II Front Fender for 3 in. x 21 in. Wheels DS-380488
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39034
Russ Wernimont Designs 5.5 in. Wernimont Custom Outlaw II Front Fender for 3 in. x 21 in. Wheels: Manufacturer part # DS-380488 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. DS-380488
1 on hand

More Info/Options for Russ Wernimont Designs 5.5 in. Wernimont Custom Outlaw II Front Fender for 3 in. x 21 in. Wheels DS-380488

Fender Protector

$296.99 Russ Wernimont Designs Midway 7.25 in. Wide Wernimont Rear Fender for Swingarm Frames DS-380470
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39623
Russ Wernimont Designs Midway 7.25 in. Wide Wernimont Rear Fender for Swingarm Frames: Manufacturer part # DS-380470 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380470
2 on hand

More Info/Options for Russ Wernimont Designs Midway 7.25 in. Wide Wernimont Rear Fender for Swingarm Frames DS-380470

Fender Protector

$350.99 Russ Wernimont Designs 2000R 13 in. Rigid Rear Fender 1401-0110
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392428
Russ Wernimont Designs 2000R 13 in. Rigid Rear Fender: Manufacturer part # 1401-0110 - For left-side drive Heavy-gauge steel construction. Each fender is inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fender comes undrilled so you can position them to look and work best for your application. Handmade in the U.S.A., , Note: Fender must be prefitted before painting. 1401-0110
1 on hand

More Info/Options for Russ Wernimont Designs 2000R 13 in. Rigid Rear Fender 1401-0110

Fender Protector

$284.99 Russ Wernimont Designs Duster 7.25 in. Wide Wernimont Rear Fender for Swingarm Frames DS-380327
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39611
Russ Wernimont Designs Duster 7.25 in. Wide Wernimont Rear Fender for Swingarm Frames: Manufacturer part # DS-380327 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380327
1 on hand

More Info/Options for Russ Wernimont Designs Duster 7.25 in. Wide Wernimont Rear Fender for Swingarm Frames DS-380327

Fender Protector

Fender Protector