$633.99Scorpion Full System ATYA 53
Manufacturer: Scorpion
Dennis Kirk Part #: 432481
Scorpion Full System: Manufacturer part # ATYA 53 - Designed to bring out the best in your machine. Boost power throughout the rpm range and improve throttle response. No repacking or re-jetting. Include removable, U.S.F.S. approved spark arrestor. System includes silencer, head pipe and spark arrestor. , , Included items 1. SC-20 Slip on silencer 450mm. 2. Link pipe CP-161. 3. 51-55mm Band clamp. 4. Front pipe CP-160. 5. M8 Washer. 6. M8 X 45MM Cap head bolt. 7. 20mm Aluminum spacer. 8. H-Type oval bandclamp. 9. Protective rubber silencer strip. 10. 43-47mm Band clamp.. ATYA 53 2 on hand
$303.99Jardine Slash-Cut 2-into-2 Exhaust System w/Heat Shield (Full Rear and Partial Front Headpipes) 14-2911-01S
Manufacturer: Jardine
Dennis Kirk Part #: 4400151
Jardine Slash-Cut 2-into-2 Exhaust System w/Heat Shield (Full Rear and Partial Front Headpipes): Manufacturer part # 14-2911-01S - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Partial system includes mufflers and rear headpipe as specified. All slash-cut tip designs feature removable baffles. , , NOTE: This part fits all 50-state 06-07 versions of this motorcycle plus the 2004-05 California-only version, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 14-2911-01S 1 on hand
$363.99Jardine Tapered 2-into-2 Exhaust System with Heat Shield (Full Rear Headpipe) 14-2807-01S
Manufacturer: Jardine
Dennis Kirk Part #: 447454
Jardine Tapered 2-into-2 Exhaust System with Heat Shield (Full Rear Headpipe): Manufacturer part # 14-2807-01S - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Baffles are non-removable NOTE: This will not fit 2004-05 Calfornia versions of this motorcycle, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing. Note: Includes Rear Headpipe, Reuse Stock Front Headpipe, , No Heat Shields Included. 14-2807-01S 1 on hand
$299.99Jardine 2 in. 2-into-2 Drag Pipes Exhaust System (Full Rear Headpipe) 17-2907-01
Manufacturer: Jardine
Dennis Kirk Part #: 444742
Jardine 2 in. 2-into-2 Drag Pipes Exhaust System (Full Rear Headpipe): Manufacturer part # 17-2907-01 - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Drag pipes for V-twins are 2 in. diameter with slash-cut tips. NOTE: This will not fit 2004-05 Calfornia versions of this motorcycle, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 17-2907-01 1 on hand
$347.99Jardine Drag Pipes 2-into-2 Semi Complete Exhaust System w/Heat Shield (Full Rear and Partial Front Headpipes) 17-2911-01S
Manufacturer: Jardine
Dennis Kirk Part #: 4400160
Jardine Drag Pipes 2-into-2 Semi Complete Exhaust System w/Heat Shield (Full Rear and Partial Front Headpipes): Manufacturer part # 17-2911-01S - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Drag pipes for V-twins are 2 in. diameter with slash-cut tips. , , NOTE: This part fits all 50-state 06-07 versions of this motorcycle plus the 2004-05 California-only version, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 17-2911-01S 3 on hand
$2279.99KR Tuned Titanium Full Exhaust System 607112399
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401813
KR Tuned Titanium Full Exhaust System: Manufacturer part # 607112399 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 607112399 1 on hand
$2279.99KR Tuned Carbon Fiber Full Exhaust System 607112300
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401814
KR Tuned Carbon Fiber Full Exhaust System: Manufacturer part # 607112300 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 607112300 1 on hand
$1695.99KR Tuned Carbon Fiber Full Exhaust System 506102300
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401812
KR Tuned Carbon Fiber Full Exhaust System: Manufacturer part # 506102300 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 506102300 1 on hand
$1695.99KR Tuned Titanium Full Exhaust System 506102399
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401811
KR Tuned Titanium Full Exhaust System: Manufacturer part # 506102399 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 506102399 1 on hand
$1027.99Bostrom Racing B2 Series Full Exhaust System p4402020
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4402849
Bostrom Racing B2 Series Full Exhaust System: Manufacturer part # p4402020 - Dyno-developed headpipes feature smooth full-radius mandrel bends. Lightweight, thin-gauge 304-series stainless steel tubes slip-fit into hand-built, TIG-welded merge-style collectors. Racing-inspired spring mounting system retains headpipes and merge collectors to ensure easy installation and removal. Slash-cut megaphones with dual core element provide three different options on sound and power. Incredible exhaust tone and power over stock exhaust system. Run it wide open, with the primary core, or with the primary and secondary core installed. Both cores are packed exclusively with Silent Premium from Germany. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. p4402020 1 on hand
$932.99Bostrom Racing B2 Series Full Exhaust System p4402018
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4402013
Bostrom Racing B2 Series Full Exhaust System: Manufacturer part # p4402018 - Dyno-developed headpipes feature smooth full-radius mandrel bends. Lightweight, thin-gauge 304-series stainless steel tubes slip-fit into hand-built, TIG-welded merge-style collectors. Racing-inspired spring mounting system retains headpipes and merge collectors to ensure easy installation and removal. Slash-cut megaphones with dual core element provide three different options on sound and power. Incredible exhaust tone and power over stock exhaust system. Run it wide open, with the primary core, or with the primary and secondary core installed. Both cores are packed exclusively with Silent Premium from Germany. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. p4402018 1 on hand
CLEARANCE!
Was: $1705.99
Now: $1194.19
TI Force Full Titanium Polished Undertail/Side Exit Exhaust System 13051
Manufacturer: TI Force
Dennis Kirk Part #: 4400111
TI Force Full Titanium Polished Undertail/Side Exit Exhaust System: Manufacturer part # 13051 - High-quality exhaust systems feature high-performance tapered headpipes and titanium oval mufflers at a reasonable price. Offer superior weight savings, increased performance and durability. Made of .035 in. or .040 in. titanium tubing (depending on model). Undertail/side exit exhaust available for some models; inspired by MotoGP factory exhausts, they have a noticeably higher pitch and allow the rider to have a more unique, hard-to-find dual-exit exhaust. , NOTE: Curl end , NOTE: This item ships in 3-4 days after the order is placed., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 13051 3 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
