|
|
|
|
|
|
|
|
$389.95
Aluminum/Black/Canister Muffler/4-Into-2-Into-1 Muffler Pipe Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve
Dennis Kirk Part #: 441074
Aluminum/Black/Canister Muffler/4-Into-2-Into-1 Muffler Pipe Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve: Manufacturer part # 14302 - Large diameter, smooth-bend headpipes for maximum exhaust flow with gloss black finish that dissipates heat and fights corrosion. Polished aluminum canister is lightweight with replaceable, re-packable baffle. Machined billet aluminum end cap is a Vance & Hines trademark; includes an adjustable tip of polished stainless steel. Three-piece design features quick-release, spring mounted canister and middle section. Standard Supersport baffle. This system is 4-2-1 design. Carburetor re-jetting is recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 14302
1 on Hand
More Info/Options for Aluminum/Black/Canister Muffler/4-Into-2-Into-1 Muffler Pipe Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve
|
|
|
|
$786.99
Stainless Steel/Canister Muffler/4-Into-1 Muffler Pipe Yoshimura 4-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve
Dennis Kirk Part #: 430417
Stainless Steel/Canister Muffler/4-Into-1 Muffler Pipe Yoshimura 4-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve : Manufacturer part # CB136RR - The standard to which all other race exhausts are measured. Race track proven by Yoshimura Suzuki AMA Superbike Race Team. The people who hand pack four time AMA champion Mat Mladin's RS-3 muffler pay the same meticulous attention to detail when making your exhaust system. Header construction is stainless steel. Stainless steel quick-release mufflers. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. CB136RR
1 on Hand
More Info/Options for Stainless Steel/Canister Muffler/4-Into-1 Muffler Pipe Yoshimura 4-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve
|
|
|
|
$1739.99
Akrapovic 4-2-1 Evolution Exhaust System w/Hexagonal Titanium Muffler 4401116
Dennis Kirk Part #: 4401116
Akrapovic 4-2-1 Evolution Exhaust System w/Hexagonal Titanium Muffler 4401116: Manufacturer part # SY6RFT6TLTT - Oval-shaped can. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical shaped, hydroformed header and link pipe are made of stainless steel or titanium; type of construction is based on maximum increase in performance. Crossover tubes may be installed based on the results of testing. Most models come with preinstalled fitting for lambda connection. Ceramic anti-seizing grease, made especially for use with titanium, is used to prevent seizing, corrosion and excessive wear of parts of the exhaust system made of titanium (due to vibration and extreme temperatures). Evolution Kit systems are available for select models; intended only for races that allow louder exhaust systems (107 dB). Evolution Kit systems feature a 300mm muffler, high-mount design and include a carbon fiber muffler mounting bracket. , NOTE: Titanium header, NOTE: This item ships in 3-4 days after the order is placed., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. SY6RFT6TLTT
1 on Hand
More Info/Options for Akrapovic 4-2-1 Evolution Exhaust System w/Hexagonal Titanium Muffler 4401116
|
|
|
|
$1338.99
Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402102
Dennis Kirk Part #: 4402102
Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402102: Manufacturer part # SB8RFT1TLLT - Oval-shaped can. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical shaped, hydroformed header and link pipe are made of stainless steel or titanium; type of construction is based on maximum increase in performance. Crossover tubes may be installed based on the results of testing. Most models come with preinstalled fitting for lambda connection. Ceramic anti-seizing grease, made especially for use with titanium, is used to prevent seizing, corrosion and excessive wear of parts of the exhaust system made of titanium (due to vibration and extreme temperatures). Evolution Kit systems are available for select models; intended only for races that allow louder exhaust systems (107 dB). Evolution Kit systems feature a 300mm muffler, high-mount design and include a carbon fiber muffler mounting bracket. , NOTE: Titanium header , NOTE: This item ships in 3-4 days after the order is placed., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. SB8RFT1TLLT
1 on Hand
More Info/Options for Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402102
|
|
|
|
$2450.95
Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402149
Dennis Kirk Part #: 4402149
Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402149: Manufacturer part # SY10RFT9TDTT - Oval-shaped can. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical shaped, hydroformed header and link pipe are made of stainless steel or titanium; type of construction is based on maximum increase in performance. Crossover tubes may be installed based on the results of testing. Most models come with preinstalled fitting for lambda connection. Ceramic anti-seizing grease, made especially for use with titanium, is used to prevent seizing, corrosion and excessive wear of parts of the exhaust system made of titanium (due to vibration and extreme temperatures). Evolution Kit systems are available for select models; intended only for races that allow louder exhaust systems (107 dB). Evolution Kit systems feature a 300mm muffler, high-mount design and include a carbon fiber muffler mounting bracket. , NOTE: Titanium header , NOTE: This item ships in 3-4 days after the order is placed., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. SY10RFT9TDTT
1 on Hand
More Info/Options for Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402149
|
|
|
|
$7229.99
4 1/4 in. EPA TP Engineering 114 in. Polished Pro-Series Evolution-Style Complete Motor
Dennis Kirk Part #: 66026
4 1/4 in. EPA TP Engineering 114 in. Polished Pro-Series Evolution-Style Complete Motor: Manufacturer part # TET114P - Assembled from the highest quality American-made components. Pre-run to maintain optimal quality. Feature a new crankcase design, pro-vent rocker boxes, single-fire ignition and 45mm Mikuni carburetor with air cleaner. Include chrome billet cam cover, Smart Pump billet oil pump, forged flat-top pistons, stainless steel valves, CNC-ported heads with compression releases, forged steel roller rocker arms and American-made billet tappet blocks. Polished motors have polished crankcases, tappet blocks, cylinder bases, cylinder fins, head fins and spark plug area. Show-polished motors have polished crankcases, tappet blocks, cylinders, heads, carb and intake manifold. All motors include a Manufacturer's Statement of Origin (MSO). Made in the U.S.A. , NOTE: This item ships 3 or 4 days after the order is placed NOTE: Fits all 84-99 Evolution Frames.. TET114P
1 on Hand
More Info/Options for 4 1/4 in. EPA TP Engineering 114 in. Polished Pro-Series Evolution-Style Complete Motor
|
|
|
|
$8622.99
4 5/8 in. EPA TP Engineering 124 in. Show Polished Pro-Series Evolution-Style Complete Motor
Dennis Kirk Part #: 66031
4 5/8 in. EPA TP Engineering 124 in. Show Polished Pro-Series Evolution-Style Complete Motor: Manufacturer part # TET124SP - Assembled from the highest quality American-made components. Pre-run to maintain optimal quality. Feature a new crankcase design, pro-vent rocker boxes, single-fire ignition and 45mm Mikuni carburetor with air cleaner. Include chrome billet cam cover, Smart Pump billet oil pump, forged flat-top pistons, stainless steel valves, CNC-ported heads with compression releases, forged steel roller rocker arms and American-made billet tappet blocks. Polished motors have polished crankcases, tappet blocks, cylinder bases, cylinder fins, head fins and spark plug area. Show-polished motors have polished crankcases, tappet blocks, cylinders, heads, carb and intake manifold. All motors include a Manufacturer's Statement of Origin (MSO). Made in the U.S.A. , NOTE: This item ships 3 or 4 days after the order is placed NOTE: Fits all 84-99 Evolution Frames.. TET124SP
1 on Hand
More Info/Options for 4 5/8 in. EPA TP Engineering 124 in. Show Polished Pro-Series Evolution-Style Complete Motor
|
|
|
|
$7435.99
4 5/8 in. EPA TP Engineering 124 in. Polished Pro-Series Evolution-Style Complete Motor
Dennis Kirk Part #: 66030
4 5/8 in. EPA TP Engineering 124 in. Polished Pro-Series Evolution-Style Complete Motor: Manufacturer part # TET124P - Assembled from the highest quality American-made components. Pre-run to maintain optimal quality. Feature a new crankcase design, pro-vent rocker boxes, single-fire ignition and 45mm Mikuni carburetor with air cleaner. Include chrome billet cam cover, Smart Pump billet oil pump, forged flat-top pistons, stainless steel valves, CNC-ported heads with compression releases, forged steel roller rocker arms and American-made billet tappet blocks. Polished motors have polished crankcases, tappet blocks, cylinder bases, cylinder fins, head fins and spark plug area. Show-polished motors have polished crankcases, tappet blocks, cylinders, heads, carb and intake manifold. All motors include a Manufacturer's Statement of Origin (MSO). Made in the U.S.A. , NOTE: This item ships 3 or 4 days after the order is placed NOTE: Fits all 84-99 Evolution Frames.. TET124P
1 on Hand
More Info/Options for 4 5/8 in. EPA TP Engineering 124 in. Polished Pro-Series Evolution-Style Complete Motor
|
|
|
|
$8562.99
4 1/2 in. EPA TP Engineering 121 in. Show Polished Pro-Series Evolution-Style Complete Motor
Dennis Kirk Part #: 66029
4 1/2 in. EPA TP Engineering 121 in. Show Polished Pro-Series Evolution-Style Complete Motor: Manufacturer part # TET121SP - Assembled from the highest quality American-made components. Pre-run to maintain optimal quality. Feature a new crankcase design, pro-vent rocker boxes, single-fire ignition and 45mm Mikuni carburetor with air cleaner. Include chrome billet cam cover, Smart Pump billet oil pump, forged flat-top pistons, stainless steel valves, CNC-ported heads with compression releases, forged steel roller rocker arms and American-made billet tappet blocks. Polished motors have polished crankcases, tappet blocks, cylinder bases, cylinder fins, head fins and spark plug area. Show-polished motors have polished crankcases, tappet blocks, cylinders, heads, carb and intake manifold. All motors include a Manufacturer's Statement of Origin (MSO). Made in the U.S.A. , NOTE: This item ships 3 or 4 days after the order is placed NOTE: Fits all 84-99 Evolution Frames.. TET121SP
1 on Hand
More Info/Options for 4 1/2 in. EPA TP Engineering 121 in. Show Polished Pro-Series Evolution-Style Complete Motor
|
|
