$37.99Bluhm Enterprises LED Accent Light Kit BLACLEDR
Manufacturer: Bluhm Enterprises
Dennis Kirk Part #: 22559
Bluhm Enterprises LED Accent Light Kit: Manufacturer part # BLACLEDR - Kits include eight LED units with five high-power LEDs in each unit. Molded in clear plastic cases made to withstand extreme impacts. LEDs are waterproof and draw 30 milli-amps. Can be used on any 12V vehicle; no battery needed. Contains all wires, fasteners, mounting clips and 3M adhesive mounting pads needed to install in minutes. Diameter: 1 1/4 in. Height: 3/4 in. , , Included Items: , (8) Accent lights, (8) Wire ties, (8) Double sided tape pieces, (16) Mounting screws, Instructions. BLACLEDR 8 on hand
$426.99PIAA P1000C Crash Bar Light Kit 73090
Manufacturer: PIAA
Dennis Kirk Part #: 213678
PIAA P1000C Crash Bar Light Kit: Manufacturer part # 73090 - Fits all 1 1/4 in. bars. Easy-to-install kit includes: two lights, wiring harness, two brackets, mounting hardware, and installation instructions. P1000C Crash bar kit features 35W=70W light output Xtreme White bulbs and an 18 degree driving pattern for long distance coverage. 3 9/16 in. W x 2 11/16 in. T x 3 5/8 in. D chrome oval housings. 005 Crash bar kit features 35W=70W light output Xtreme White bulbs and a 30 degree beam pattern for wider side-by-side road coverage. 2 9/16 in. diameter x 3 in. deep chrome oval housings. Brackets have a high-chrome finish and fit the lights perfectly.. 73090 Expected Soon
$192.99Show Chrome Lower Fog Light Kit 52-704
Manufacturer: Show Chrome
Dennis Kirk Part #: 211965
Show Chrome Lower Fog Light Kit: Manufacturer part # 52-704 - Powerful 35W, H3 halogen lights with blue lenses tear through fog. Kit includes all necessary wiring, lights and switches. NOTE: For replacement bulb use part number 22581. 52-704 2 on hand
$246.99Show Chrome 2 3/8 in. Elliptical Driving Light Kit 53-133
Manufacturer: Show Chrome
Dennis Kirk Part #: 213737
Show Chrome 2 3/8 in. Elliptical Driving Light Kit: Manufacturer part # 53-133 - Formed steel light bar with elliptical design hosts cast aluminum light housings that are permanently attached without welds; weld-free design ensures that vibration will not detach lights over time. Wiring is routed internally. Kits available with 4 1/2 in., 55W halogen lights or 2 3/8 in., 50W focused beam mini halogen lights. Included on/off switch can be easily mounted in a side cover. Included on/off switch can be easily mounted in a side cover. Turn signal relocation inserts required part number 212880.. 53-133 1 on hand
$119.95Harley-Davidson 3-Light Tour-Pak and Saddlebag Interior Light Kit 54331-04
Manufacturer: Harley-Davidson
Dennis Kirk Part #: 211889
Harley-Davidson 3-Light Tour-Pak and Saddlebag Interior Light Kit: Manufacturer part # 54331-04 - Dont be left in the dark. This bright convenience lamp kit turns night-time into day when you open your Tour-Pak or saddlebag. A brilliant white LED light pod mounts inside the Tour-Pak to illuminate the interior, and the two available LED light pods mount to the bottom the the Tour-Pak to cast a soft touch micro switch for ease of activation, and a 5 minute auto shut-off time to prevent battery drain. Kit includes quick-disconnect wiring harness and installation hardware. NOTE: Fits Touring models equipped with rigid or detachable, King of Chopped Tour-Pak Luggage.. 54331-04 1 on hand
$99.95Harley-Davidson Electra Glo Rider Footboard Edge Light Kit 50743-04
Manufacturer: Harley-Davidson
Dennis Kirk Part #: 211888
Harley-Davidson Electra Glo Rider Footboard Edge Light Kit: Manufacturer part # 50743-04 - Add a rim of neon-like light to the rider footboard. This integrated red LED light and lens assembly hugs the bottom of the rider footboard, and is held in place by the footboard insert isolation mounting system. The soft red glow acts as an auxiliary side marker light, and casts a subtle pool of light on the ground below. The perfect complement to the Electra Glo Lighted Passenger Footboard Cover. Kit includes left and right footboard lights, wiring harness and all necessary installation components. NOTE: May not conform with local regulations. NOTE: Fits listed models equipped with traditional D-shaped rider footboards.. 50743-04 2 on hand
$21.99ElectroPods Rectangular Mini Pod Lighting Kit 14223
Manufacturer: ElectroPods
Dennis Kirk Part #: 212923
ElectroPods Rectangular Mini Pod Lighting Kit: Manufacturer part # 14223 - Makes your bike more noticeable and visible. Super bright LED lights that are water and vibration resistant. Each mini pod unit contains 6 LED lights that are "fanned out" for maximum area illumination. Kits include: water resistant on/off switch, fuse holder, necessary wiring, foam mounting tape, cable ties and complete instructions. Contains 2 mini pods with 1 1/2 in. x 3/4 in. black rectangular housings.. 14223 4 on hand
$87.99ElectroPods 12 Volt LED Lighting Kit 14216
Manufacturer: ElectroPods
Dennis Kirk Part #: 212916
ElectroPods 12 Volt LED Lighting Kit: Manufacturer part # 14216 - Makes your bike more noticeable and visible. Super bright LED lights that are water and vibration resistant. Each mini pod unit contains 6 LED lights that are "fanned out" for maximum area illumination. Each linear strip has 6 LED lights in a row. All kits include: water resistant on/off switch, fuse holder, necessary wiring, foam mounting tape, cable ties and complete instructions. Packaging illuminates for easy demonstration. Contains 6 mini pods with 1 1/2 in. x 1 in black oval housings and 2 linear strips with 8 x 3/4 in. rectangular housings.. 14216 4 on hand
$21.99ElectroPods Oval 12 Mini Pod Lighting Kit 14219
Manufacturer: ElectroPods
Dennis Kirk Part #: 212919
ElectroPods Oval 12 Mini Pod Lighting Kit: Manufacturer part # 14219 - Makes your bike more noticeable and visible. Super bright LED lights that are water and vibration resistant. Each mini pod unit contains 6 LED lights that are "fanned out" for maximum area illumination. Kits include: water resistant on/off switch, fuse holder, necessary wiring, foam mounting tape, cable ties and complete instructions. Contains 2 mini pods with 1 1/2 in. x 1 in. chrome oval housings.. 14219 2 on hand
$27.99ElectroPods Street FX 12V LED Brake Light Kit 14215
Manufacturer: ElectroPods
Dennis Kirk Part #: 212915
ElectroPods Street FX 12V LED Brake Light Kit: Manufacturer part # 14215 - Super-bright LED lights that are water -and vibration-resistant. Wire directly into brake light system. Eight ultra-bright red LEDs blink when brakes are applied for added visibility. Includes weather-resistant on/off switch, fuse holder, necessary wiring, foam mounting tape, cable ties and complete instructions.. 14215 2 on hand
$37.99Bluhm Enterprises LED Accent Light Kit BLACLEDB
Manufacturer: Bluhm Enterprises
Dennis Kirk Part #: 22561
Bluhm Enterprises LED Accent Light Kit: Manufacturer part # BLACLEDB - Kits include eight LED units with five high-power LEDs in each unit. Molded in clear plastic cases made to withstand extreme impacts. LEDs are waterproof and draw 30 milli-amps. Can be used on any 12V vehicle; no battery needed. Contains all wires, fasteners, mounting clips and 3M adhesive mounting pads needed to install in minutes. , , Included Items: , (8) Accent lights, (8) Wire ties, (8) Double sided tape pieces, (16) Mounting screws, Instructions. BLACLEDB More than 10 on hand
$37.99Bluhm Enterprises LED Accent Light Kit BLACLEDY
Manufacturer: Bluhm Enterprises
Dennis Kirk Part #: 22562
Bluhm Enterprises LED Accent Light Kit: Manufacturer part # BLACLEDY - Kits include eight LED units with five high-power LEDs in each unit. Molded in clear plastic cases made to withstand extreme impacts. LEDs are waterproof and draw 30 milli-amps. Can be used on any 12V vehicle; no battery needed. Contains all wires, fasteners, mounting clips and 3M adhesive mounting pads needed to install in minutes. , , Included Items: , (8) Accent lights, (8) Wire ties, (8) Double sided tape pieces, (16) Mounting screws, Instructions. BLACLEDY 2 on hand