$7.99Novus Polish 3 NOVUS NO 3
Manufacturer: Novus
Dennis Kirk Part #: 301300
Novus Polish 3: Manufacturer part # NOVUS NO 3 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 takes out heavy scratches in Lucite® and Plexiglas® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 - (3186) is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 3 More than 10 on hand
$24.95Sport Parts Inc. 3 in. Handlebar Riser SM-08078-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592880
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08078-3 - Black extruded 6061 T-6 aluminum risers. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08078-3 10 on hand
$24.95Sport Parts Inc. 3 in. Handlebar Riser SM-08068-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592877
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08068-3 - Black extruded 6061 T-6 aluminum riser. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08068-3 10 on hand
$179.99Hot Cams Stage 3 Stroker Hot Cam 1078-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149994
Hot Cams Stage 3 Stroker Hot Cam: Manufacturer part # 1078-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Huge top-end and great over rev in supermoto and big bore/strokers Uses stock valve springs and auto-decompression mechanism. , Specs: , Intake Lift: 10.4mm, Intake Duration (@1mm): 251.5 Degrees, Exhaust Lift: 9.05mm, Exhaust Duration (@ 1mm): 265 Degrees. 1078-3 1 on hand
$179.99Hot Cams Stage 3 Cam 1051-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149530
Hot Cams Stage 3 Cam: Manufacturer part # 1051-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Recomended for big-bore stroker applications only, for mid-range, and top end, , Intake Lift: 9.1mm, Intake Duration (@ 1mm): 262 Degress, Exhaust Lift: 9mm, Exhaust Duration (@ 1mm): 257 Degress. 1051-3 1 on hand
$179.99Hot Cams Stage 3 Stroker Cam 1056-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149531
Hot Cams Stage 3 Stroker Cam: Manufacturer part # 1056-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Specifically designed to produce more mid-range and top-end power in big bore and stroker applications - not stock displacement, , Intake Lift: 10.4mm, Intake Duration (@ 1mm): 251.5 Degrees, Exhaust Lift: 9mm, Exhaust Duration: (@ 1mm): 265 Degress. 1056-3 2 on hand
$179.99Hot Cams Stage 3 Cam 4050-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149548
Hot Cams Stage 3 Cam: Manufacturer part # 4050-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Specifically designed for big bore and stroker applications - not stock displacement, , Intake Lift: 10.16mm, Intake Duration (@ 1mm): 265 Degrees, Exhaust Lift: 10.82mm, Exhaust Duration (@ 1mm): 271 Degrees NOTE: Requires kibblewhite spring kit part NO. 18-1872 to work properly - Must be ordered separately... 4050-3 2 on hand
$24.95Sport Parts Inc. 3 in. Handlebar Riser SM-08067-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592874
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08067-3 - Black extruded 6061 T-6 aluminum riser. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08067-3 More than 10 on hand
$24.95Sport Parts Inc. 3 in. Handlebar Riser Kit SM-08066-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592871
Sport Parts Inc. 3 in. Handlebar Riser Kit: Manufacturer part # SM-08066-3 - Black extruded 6061 T-6 aluminum riser. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08066-3 More than 10 on hand
$623.99Shoei X-Eleven Elias TC-3 Helmet 0111-1103-08
Manufacturer: Shoei
Dennis Kirk Part #: 3302818XXL
Shoei X-Eleven Elias TC-3 Helmet: Manufacturer part # 0111-1103-08 - Shoei's top-of-the-line performance helmet - the X-Eleven, is a study in safety design, ventilation and aerodynamic engineering , , Aerodynamic shell design . Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback. The Aero Edge Spoiler dramatically reduces drag and left coefficients, thus diminishing rider fatigue and increasing performance. , , Hyper Dual-Liner II Ventilation System Offers unmatched ventilation with internal channels and exhaust ports throughtout the helmet. The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation. Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted. The lower air intake provides an additional source of air flow. The neck outlet vent allows for effective air exhaust. , , Lightweight, Advanced Integrated Matrix Plus (Aim+) High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient. , , Anti-Fog System Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging. The lower air intake provides air flow that helps to diminish shield fogging. , , 3D Full Support Interior, Type 3 The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning and/or replacement. Each component of the inner liner is ergonomically designed to offer safety, fit and comfort. , , Standard Chin-Strap Clip Neatly secures chin strap. , , CX-1 V Shield and Lock System Q.R.B.P. (Quick-Release Base Plate) allows tool-less shield removal. A wide, 3-dimensionally curved shield offers increased peripheral vision and optical clarity. Scratch-resistant coating. 99% protection fro harmful UV A & B rays. A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly. Shield cleaning kit included. , , Medium weighs 3.35 lbs. 0111-1103-08 1 on hand
$623.99Shoei X-Eleven Elias TC-3 Helmet 0111-1103-06
Manufacturer: Shoei
Dennis Kirk Part #: 3302818L
Shoei X-Eleven Elias TC-3 Helmet: Manufacturer part # 0111-1103-06 - Shoei's top-of-the-line performance helmet - the X-Eleven, is a study in safety design, ventilation and aerodynamic engineering , , Aerodynamic shell design . Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback. The Aero Edge Spoiler dramatically reduces drag and left coefficients, thus diminishing rider fatigue and increasing performance. , , Hyper Dual-Liner II Ventilation System Offers unmatched ventilation with internal channels and exhaust ports throughtout the helmet. The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation. Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted. The lower air intake provides an additional source of air flow. The neck outlet vent allows for effective air exhaust. , , Lightweight, Advanced Integrated Matrix Plus (Aim+) High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient. , , Anti-Fog System Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging. The lower air intake provides air flow that helps to diminish shield fogging. , , 3D Full Support Interior, Type 3 The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning and/or replacement. Each component of the inner liner is ergonomically designed to offer safety, fit and comfort. , , Standard Chin-Strap Clip Neatly secures chin strap. , , CX-1 V Shield and Lock System Q.R.B.P. (Quick-Release Base Plate) allows tool-less shield removal. A wide, 3-dimensionally curved shield offers increased peripheral vision and optical clarity. Scratch-resistant coating. 99% protection fro harmful UV A & B rays. A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly. Shield cleaning kit included. , , Medium weighs 3.35 lbs. 0111-1103-06 1 on hand
$623.99Shoei X-Eleven Elias TC-3 Helmet 0111-1103-05
Manufacturer: Shoei
Dennis Kirk Part #: 3302818M
Shoei X-Eleven Elias TC-3 Helmet: Manufacturer part # 0111-1103-05 - Shoei's top-of-the-line performance helmet - the X-Eleven, is a study in safety design, ventilation and aerodynamic engineering , , Aerodynamic shell design . Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback. The Aero Edge Spoiler dramatically reduces drag and left coefficients, thus diminishing rider fatigue and increasing performance. , , Hyper Dual-Liner II Ventilation System Offers unmatched ventilation with internal channels and exhaust ports throughtout the helmet. The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation. Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted. The lower air intake provides an additional source of air flow. The neck outlet vent allows for effective air exhaust. , , Lightweight, Advanced Integrated Matrix Plus (Aim+) High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient. , , Anti-Fog System Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging. The lower air intake provides air flow that helps to diminish shield fogging. , , 3D Full Support Interior, Type 3 The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning and/or replacement. Each component of the inner liner is ergonomically designed to offer safety, fit and comfort. , , Standard Chin-Strap Clip Neatly secures chin strap. , , CX-1 V Shield and Lock System Q.R.B.P. (Quick-Release Base Plate) allows tool-less shield removal. A wide, 3-dimensionally curved shield offers increased peripheral vision and optical clarity. Scratch-resistant coating. 99% protection fro harmful UV A & B rays. A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly. Shield cleaning kit included. , , Medium weighs 3.35 lbs. 0111-1103-05 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
