|
|
$315.95
Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip 444819
Dennis Kirk Part #: 444819
Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip 444819: Manufacturer part # 1161SC - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 1 5/8 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Short chrome heat shields included with this system. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product.. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. Exhaust gaskets are not included, but are recommended every time a system is installed. This system requires two of our Part No. 26-1063. INCLUDED ITEMS: One front exhaust. One rear exhaust. One 3/4 in. aluminum spacer. One 1 3/4 in. heat shields. One instruction sheet.. 1161SC
Expected Soon
More Info/Options for Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip 444819
|
|
|
|
$455.99
Cobra 2 in. Slash Cut Tip Drag Pipe 443755
Dennis Kirk Part #: 443755
Cobra 2 in. Slash Cut Tip Drag Pipe 443755: Manufacturer part # 2169SC - The same craftsmanship and high quality fit, finish and materials as the complete systems. Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Better sound and style, with larger, longer muffler bodies than the competition. 3 in. Muffler bodies are used on the OEM headpipes, which also eliminates the original muffler box. Baffles are non-removable. No re-jetting necessary although it is recommended for best performance. 4-into-4 includes two mufflers for each side. Must remove centerstand; rejetting recommended. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 2169SC
1 on Hand
More Info/Options for Cobra 2 in. Slash Cut Tip Drag Pipe 443755
|
|
|
|
$427.99
Cobra 2 in. Slash-Cut Tip Drag Pipe Slip-Ons 446043
Dennis Kirk Part #: 446043
Cobra 2 in. Slash-Cut Tip Drag Pipe Slip-Ons 446043: Manufacturer part # 1264 - The same craftsmanship and high quality fit, finish and materials as the complete systems. Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Better sound and style, with larger, longer muffler bodies than the competition. 2" Chrome plated steel muffler bodies are used on the OEM headpipes. No re-jetting necessary although it is recommended for best performance. NOTE: 4-into-4 design includes 2 mufflers for each side. 2 in. Slash-Cut tip drag pipes feature removable baffles. Fits only on models without saddlebags. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1264
1 on Hand
More Info/Options for Cobra 2 in. Slash-Cut Tip Drag Pipe Slip-Ons 446043
|
|
|
|
$631.95
Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System 444444
Dennis Kirk Part #: 444444
Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System 444444: Manufacturer part # 1269 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include headpipes. Slash-Cut Tip Drag Pipes are 2 in. diameter. Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Drag pipes are 6 into 6 design with three pipes exiting on each side, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1269
1 on Hand
More Info/Options for Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System 444444
|
|
|
|
$339.99
Cobra Drag Pipe Exhaust System 430798
Dennis Kirk Part #: 430798
Cobra Drag Pipe Exhaust System 430798: Manufacturer part # 1274 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 2 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 1274
2 on Hand
More Info/Options for Cobra Drag Pipe Exhaust System 430798
|
|
|
|
$252.95
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 444299
Dennis Kirk Part #: 444299
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 444299: Manufacturer part # 3164SC - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Cobra Drag Pipes have removable baffles. 2 in. muffler bodies are used on O.E.M. headpipes. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: This part fits all 50-state 06-07 versions of this motorcycle plus the 04-05 California-only versions INCLUDED ITEMS: One front muffler. One rear muffler. Two #268-55 clamps. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 3164SC
Expected Soon
More Info/Options for Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 444299
|
|
|
|
|
|
|
|
$299.99
Jardine 2 in. Drag Pipes Semi-Complete System 444742
Dennis Kirk Part #: 444742
Jardine 2 in. Drag Pipes Semi-Complete System 444742: Manufacturer part # 17-2907-01 - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Drag pipes for V-twins are 2 in. diameter with slash-cut tips. NOTE: This will not fit 2004-05 Calfornia versions of this motorcycle, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 17-2907-01
1 on Hand
More Info/Options for Jardine 2 in. Drag Pipes Semi-Complete System 444742
|
|
|
|
$419.99
Jardine Rumbler Drag Pipe Slip-Ons Muffers 444014
Dennis Kirk Part #: 444014
Jardine Rumbler Drag Pipe Slip-Ons Muffers 444014: Manufacturer part # 17-1105-01 - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome plated. Drag pipes for Magna are 2 1/2 in. diameter with slash-cut pipes. Baffles are removable. Drag pipes for Magnas have left and right exits. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 17-1105-01
1 on Hand
More Info/Options for Jardine Rumbler Drag Pipe Slip-Ons Muffers 444014
|
|
|
|
$560.99
Jardine 2 1/4 in. Drag Pipes 2-into-2 Exhaust System with Heat Shields 447474
Dennis Kirk Part #: 447474
Jardine 2 1/4 in. Drag Pipes 2-into-2 Exhaust System with Heat Shields 447474: Manufacturer part # 17-1716-01S - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Drag pipes for V-twins are 2 in. diameter with slash-cut tips. All slash-cut tip designs feature removable baffles, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 17-1716-01S
2 on Hand
More Info/Options for Jardine 2 1/4 in. Drag Pipes 2-into-2 Exhaust System with Heat Shields 447474
|
|
|
|
CLEARANCE!
Was: $357.99
Now: $322.19
Jardine Rumblers Drag Pipe Complete System 444012
Dennis Kirk Part #: 444012
Jardine Rumblers Drag Pipe Complete System 444012: Manufacturer part # 17-1907-01 - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. The original muffler box is eliminated. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Drag pipes for V-twins are 2 in. diameter, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 17-1907-01
1 on Hand
More Info/Options for Jardine Rumblers Drag Pipe Complete System 444012
|
|
