Daytona-Twin Tec

$189.99 Daytona Twin Tec Twin Tuner Fuel-Injection Controller p202126
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 202126
Daytona Twin Tec Twin Tuner Fuel-Injection Controller: Manufacturer part # p202126 - Note: This item ships 3-4 days after the order is processed , , Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts. Mode and up/down pushbutton switches make fuel trim adjustments in the RPM and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display. Advanced mode (using optional USB Interface OUR PART #20-1555 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders. Can use DynoJet Power Commander maps. Easy plug-in installation and setup. Compact size only 4" L x 2" W x 1/2" H. Compatible with Twin Scan II+ Tuning Aid install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software. For Big Twin 01 and up with 36-pin Delphi EFI (except FLHT/FLHR/FLHX/FLTR 08-09 with electronic throttle control) and Buell XB, 1125R 08-09 with DDFI fuel-injection system.. p202126
1 on hand

More Info/Options for Daytona Twin Tec Twin Tuner Fuel-Injection Controller p202126

Daytona-Twin Tec

$417.99 Daytona Twin Tec Twin Cam Ignition Kits 3088
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 201093
Daytona Twin Tec Twin Cam Ignition Kits: Manufacturer part # 3088 - Includes new 12-pin TC88A ignition module, PC link cable, single-fire coil, and spark plug wires. Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors. Five rotary switches for timing adjustments, advanced slope and rpm limits. Digital rpm limiter (set in 100-rpm steps). Selectable multi-spark mode for quick starts and smooth running. Coil outputs are protected against short circuits. Instructions included. Made in the U.S.A... 3088
1 on hand

More Info/Options for Daytona Twin Tec Twin Cam Ignition Kits 3088

Daytona-Twin Tec

$360.99 Daytona Twin Tec Twin Cam Ignition Kits 3008
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 201021
Daytona Twin Tec Twin Cam Ignition Kits: Manufacturer part # 3008 - Daytona Twin Tec LLC has a simple philosophy - do one thing and do it well. Kit for Twin Cam 88 99-03 carb models features an ignition module, spark plug wires and single-fire coil. Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors. Five rotary switches for timing adjustments, advanced slope and rpm limits. Digital rpm limiter (set in 100-rpm steps). Selectable multi-spark mode for quick starts and smooth running. Coil outputs are protected against short circuits. Optional PC link cable and software available for programming custom curves, programs available at (www.daytona-twintec.com). Instructions included. Made in the U.S.A.. For models listed with two 6-pin ignition module connectors. 3008
1 on hand

More Info/Options for Daytona Twin Tec Twin Cam Ignition Kits 3008

Daytona-Twin Tec

$82.99 Daytona Twin Tec Ignition Coil 2008
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: H20040
Daytona Twin Tec Ignition Coil: Manufacturer part # 2008 - OEM single-fire design; 45,000V. Designed for OEM ignitions; replace OEM #31655-99. , , NOTE: Not for fuel injected models. 2008
3 on hand

More Info/Options for Daytona Twin Tec Ignition Coil 2008

Daytona-Twin Tec

$341.99 Daytona Twin Tec External Ignition Module Kit 3005
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: H20886
Daytona Twin Tec External Ignition Module Kit: Manufacturer part # 3005 - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Optional software available (programs available on web site at www.daytona-twintec.com/index.html) for programming custom curves. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A... 3005
2 on hand

More Info/Options for Daytona Twin Tec External Ignition Module Kit 3005

Daytona-Twin Tec

$360.99 Daytona Twin Tec External Module Ignition Kit 3005S
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: H20895
Daytona Twin Tec External Module Ignition Kit: Manufacturer part # 3005S - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. Optional software available for programming custom curves, programs available at (www.daytona-twintec.com). 3005S
1 on hand

More Info/Options for Daytona Twin Tec External Module Ignition Kit 3005S

Daytona-Twin Tec

$16.99 Daytona Twin Tec Ignition Power Relay Kit 1030
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 201558
Daytona Twin Tec Ignition Power Relay Kit: Manufacturer part # 1030 - Fixes starting problems in motorcycles using high compression ratios or with large displacement engines that use Twin Tec single-fire installations. If the power draw of the starter motor, single-fire coil, long length of wire between the battery, engine stop-run switch and the coil leaves too little power at the coil to fire the engine, this kit solves the problem by supplying full battery voltage to the coil. Includes a high-quality relay, wire and terminals.. 1030
1 on hand

More Info/Options for Daytona Twin Tec Ignition Power Relay Kit 1030

Daytona-Twin Tec

$94.99 Daytona Twin Tec TC88A Power Adapter TC88AADAPT
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 201529
Daytona Twin Tec TC88A Power Adapter: Manufacturer part # TC88AADAPT - 12V power adapters for bench programming w/PC interface cable (North American use w/120V AC only). For use with Ignition Module, Part No. 201025. TC88AADAPT
1 on hand

More Info/Options for Daytona Twin Tec TC88A Power Adapter TC88AADAPT

Daytona-Twin Tec

$82.99 Daytona Twin Tec Single-Fire Coil 2005
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 201559
Daytona Twin Tec Single-Fire Coil : Manufacturer part # 2005 - Single-fire, 3-ohm high-output coil. Compatible with all Twin Tec and most aftermarket single-fire ignitions. Not for EFI models.. 2005
4 on hand

More Info/Options for Daytona Twin Tec Single-Fire Coil 2005

Daytona-Twin Tec

$23.99 Daytona Twin Tec 8.5mm Spark Plug Wire 3003
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 201531
Daytona Twin Tec 8.5mm Spark Plug Wire: Manufacturer part # 3003 - Available in 7mm or 8.5mm. Include plug wires, terminals and boots for various applications. Wires are 17" and 22" long. Made in the U.S.A... 3003
1 on hand

More Info/Options for Daytona Twin Tec 8.5mm Spark Plug Wire 3003

Daytona-Twin Tec

$360.99 Daytona Twin Tec External Module Ignition Kit 3007
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: H20898
Daytona Twin Tec External Module Ignition Kit: Manufacturer part # 3007 - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. 8-pin Deutsch plug. 3007
Expected Soon

More Info/Options for Daytona Twin Tec External Module Ignition Kit 3007

Daytona-Twin Tec

$360.99 Daytona Twin Tec External Module Ignition Kit 3006
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: H20896
Daytona Twin Tec External Module Ignition Kit: Manufacturer part # 3006 - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. 7-pin cannon plug. 3006
Expected Soon

More Info/Options for Daytona Twin Tec External Module Ignition Kit 3006

Daytona-Twin Tec

Daytona-Twin Tec