Custom Rear Fender

CLEARANCE!
Was: $595.99
Now: $357.59
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-11 in. W for Rigid Frames 14010157
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392592
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-11 in. W for Rigid Frames: Manufacturer part # 14010157 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes (unless noted). A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Made in the U.S.A.. Included Items: Empty 5-pin connector housing 6-Connector H-D wire interface assembly Two Turn Signal extension wires One Plug-in load equalizer Four Pairs 1/4 in.-20 x 1/2 in hex bolts and compression washers Dielectric grease pak Note: Fender must be prefitted before painting.. 14010157
1 on hand

More Info/Options for Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-11 in. W for Rigid Frames 14010157

Custom Rear Fender

CLEARANCE!
Was: $881.99
Now: $529.19
Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender 14010138
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392573
Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender: Manufacturer part # 14010138 - Eliminate unsightly external struts with these internal strut fenders. Strength and straightness assured from heavy-duty steel construction. Inspected personally by a master fender builder to assure a flawless finish. For custom applications only (not recommended for OEM frames). Made in the U.S.A. Note: Requires welding a mounting plate (included) to the frame before installing the fender. Note: Fender must be pre-fitted before painting Included Items: One taillight assembly with extension wire and instructions Empty 5-pin connector housing 6-Connector H-D wire interface assembly Two Turn Signal extension wires One Plug-in load equalizer Four Pairs 1/4 in.-20 x 1/2 in hex bolts and compression washers Dielectric grease pak. 14010138
1 on hand

More Info/Options for Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender 14010138

Custom Rear Fender

$328.99 Russ Wernimont Designs 9000R 9 in. Wide Wernimont Custom Rear Fender for Rigid Frames DS-380621
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39286
Russ Wernimont Designs 9000R 9 in. Wide Wernimont Custom Rear Fender for Rigid Frames: Manufacturer part # DS-380621 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience. Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Has no wiring tubes. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380621
1 on hand

More Info/Options for Russ Wernimont Designs 9000R 9 in. Wide Wernimont Custom Rear Fender for Rigid Frames DS-380621

Custom Rear Fender

$125.99 Kustomwerks Steel Smooth Custom Rear Fender 11149
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393184
Kustomwerks Steel Smooth Custom Rear Fender: Manufacturer part # 11149 - Heavy duty fenders are made from 0.080" (14 gauge) steel. Formed in one piece for added strength. Unlike the normal two piece welded fenders these won't split or crack down the middle. The steel fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. All rear fenders are supplied raw and un-drilled for custom applications. , , NOTE: Always check fender fit and installation before painting. 11149
Expected Soon

More Info/Options for Kustomwerks Steel Smooth Custom Rear Fender 11149

Custom Rear Fender

CLEARANCE!
Was: $595.99
Now: $357.59
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-13 in. W for Rigid Frames 14010158
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392593
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-13 in. W for Rigid Frames: Manufacturer part # 14010158 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes (unless noted). A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come un-drilled so you can position them to look and work best for your application. Made in the U.S.A.. Inside Width at Mounting Point:12 7/8 in. Included Items: One taillight assembly with extension wire and instructions Empty 5-pin connector housing 6-Connector H-D wire interface assembly Two Turn Signal extension wires One Plug-in load equalizer Four Pairs 1/4 in.-20 x 1/2 in hex bolts and compression washers Dielectric grease pak Note: Fender must be prefitted before painting.. 14010158
1 on hand

More Info/Options for Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-13 in. W for Rigid Frames 14010158

Custom Rear Fender

CLEARANCE!
Was: $560.99
Now: $336.59
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-9 in. W for Rigid Frames 14010156
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392591
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-9 in. W for Rigid Frames: Manufacturer part # 14010156 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes (unless noted). A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Made in the U.S.A.. Note: Fender must be prefitted before painting.. 14010156
1 on hand

More Info/Options for Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-9 in. W for Rigid Frames 14010156

Custom Rear Fender

$121.99 Kustomwerks Steel Smooth Custom Rear Fender 11147
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393183
Kustomwerks Steel Smooth Custom Rear Fender: Manufacturer part # 11147 - Heavy duty fenders are made from 0.080" (14 gauge) steel. Formed in one piece for added strength. Unlike the normal two piece welded fenders these won't split or crack down the middle. The steel fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. All rear fenders are supplied raw and un-drilled for custom applications. Mounting area width: 9-3/8 in.. , , NOTE: Always check fender fit and installation before painting. 11147
1 on hand

More Info/Options for Kustomwerks Steel Smooth Custom Rear Fender 11147

Custom Rear Fender

$1775.99 Custom Valley Custom Style Rear Fender Kit p392834
Manufacturer: Custom Valley
Dennis Kirk Part #: 392834
Custom Valley Custom Style Rear Fender Kit: Manufacturer part # p392834 - Installing a wide fender on your Dresser has never been easier; no modification required with this bolt-on kit. Allows you to keep your stock exhaust and saddlebags. Include fender, frame extension, fender strut covers, support bracket and all required hardware. Fender is one-piece, stamped 14-gauge steel. Accept up to 200mm tires. Installation of backrest and tourpak requires docking kit PART NO. 50-6597 (sold separately) and OEM detachable docking hardware. NOTE: This item ships in 3-4 days after the order is placed.. p392834
1 on hand

More Info/Options for Custom Valley Custom Style Rear Fender Kit p392834

Custom Rear Fender

$1258.99 Custom Valley Optional Custom-Style Rear Fender w/Taillight Assembly for 200mm Wide Drive Kits p392835
Manufacturer: Custom Valley
Dennis Kirk Part #: 392837
Custom Valley Optional Custom-Style Rear Fender w/Taillight Assembly for 200mm Wide Drive Kits: Manufacturer part # p392835 - 14-gauge stamped-steel fender. Looks almost like an OEM fender fitting right inside the frame, just like stock. In addition to the stock-appearing rear fender 39-2835 there are a couple of other fender options available. An optional smooth version 39-2836 so you can do whatever you want with the look and lighting. An optional custom-style 39-2837 which features an LED taillight and frenched licensed plate. , , NOTE: Replacement fenders for wide drive kits Part Nos. 494832, 494833, 494834, 492393, 492392 and 492391. , , This item ships 3-4 business days after order is placed. p392835
1 on hand

More Info/Options for Custom Valley Optional Custom-Style Rear Fender w/Taillight Assembly for 200mm Wide Drive Kits p392835

Custom Rear Fender

$55.99 Custom Chrome Custom Bobbed Style Rear Fender 25933
Manufacturer: Custom Chrome
Dennis Kirk Part #: H390655
Custom Chrome Custom Bobbed Style Rear Fender: Manufacturer part # 25933 - Detailed reproduction of OEM 4-speed FX 73-85 rear fenders. Unpainted steel.. , , Must be pre-fitted before painting.. 25933
1 on hand

More Info/Options for Custom Chrome Custom Bobbed Style Rear Fender 25933

Custom Rear Fender

$309.99 Russ Wernimont Designs Custom 13 in. Standard Blank Rear Fender 14010142
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392577
Russ Wernimont Designs Custom 13 in. Standard Blank Rear Fender: Manufacturer part # 14010142 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes (unless noted). A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Made in the U.S.A.. Note: Fender must be prefitted before painting.. 14010142
1 on hand

More Info/Options for Russ Wernimont Designs Custom 13 in. Standard Blank Rear Fender 14010142

Custom Rear Fender

$328.99 Russ Wernimont Designs Custom Rigid 8 1/2 in. Rear Fender DS-380625
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392515
Russ Wernimont Designs Custom Rigid 8 1/2 in. Rear Fender: Manufacturer part # DS-380625 - 9000R for left-side drive Heavy-gauge steel construction. Each fender is inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fender comes undrilled so you can position them to look and work best for your application. Handmade in the U.S.A., , Note: Fender must be prefitted before painting. DS-380625
1 on hand

More Info/Options for Russ Wernimont Designs Custom Rigid 8 1/2 in. Rear Fender DS-380625

Custom Rear Fender

Custom Rear Fender