Custom Motorcycle Fenders

CLEARANCE!
Was: $595.99
Now: $357.59
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-11 in. W for Rigid Frames 14010157
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392592
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-11 in. W for Rigid Frames: Manufacturer part # 14010157 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes (unless noted). A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Made in the U.S.A.. Included Items: Empty 5-pin connector housing 6-Connector H-D wire interface assembly Two Turn Signal extension wires One Plug-in load equalizer Four Pairs 1/4 in.-20 x 1/2 in hex bolts and compression washers Dielectric grease pak Note: Fender must be prefitted before painting.. 14010157
1 on hand

More Info/Options for Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-11 in. W for Rigid Frames 14010157

Custom Motorcycle Fenders

CLEARANCE!
Was: $881.99
Now: $529.19
Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender 14010138
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392573
Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender: Manufacturer part # 14010138 - Eliminate unsightly external struts with these internal strut fenders. Strength and straightness assured from heavy-duty steel construction. Inspected personally by a master fender builder to assure a flawless finish. For custom applications only (not recommended for OEM frames). Made in the U.S.A. Note: Requires welding a mounting plate (included) to the frame before installing the fender. Note: Fender must be pre-fitted before painting Included Items: One taillight assembly with extension wire and instructions Empty 5-pin connector housing 6-Connector H-D wire interface assembly Two Turn Signal extension wires One Plug-in load equalizer Four Pairs 1/4 in.-20 x 1/2 in hex bolts and compression washers Dielectric grease pak. 14010138
1 on hand

More Info/Options for Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender 14010138

Custom Motorcycle Fenders

$328.99 Russ Wernimont Designs 9000R 9 in. Wide Wernimont Custom Rear Fender for Rigid Frames DS-380621
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39286
Russ Wernimont Designs 9000R 9 in. Wide Wernimont Custom Rear Fender for Rigid Frames: Manufacturer part # DS-380621 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience. Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Has no wiring tubes. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380621
1 on hand

More Info/Options for Russ Wernimont Designs 9000R 9 in. Wide Wernimont Custom Rear Fender for Rigid Frames DS-380621

Custom Motorcycle Fenders

$214.99 Russ Wernimont Designs 6.25 in. Wide Wernimont Long Shot Custom Front Fenders for 16 in. Wheels, 37 1/2 in. Length DS-380372
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39602
Russ Wernimont Designs 6.25 in. Wide Wernimont Long Shot Custom Front Fenders for 16 in. Wheels, 37 1/2 in. Length: Manufacturer part # DS-380372 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. DS-380372
1 on hand

More Info/Options for Russ Wernimont Designs 6.25 in. Wide Wernimont Long Shot Custom Front Fenders for 16 in. Wheels, 37 1/2 in. Length DS-380372

Custom Motorcycle Fenders

$208.99 Russ Wernimont Designs 6.25 in. Wide Wernimont Cobra Custom Front Fender for FXSTD 1925-0002
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H39226
Russ Wernimont Designs 6.25 in. Wide Wernimont Cobra Custom Front Fender for FXSTD: Manufacturer part # 1925-0002 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A Master Fender Builder inspects each fender to ensure straightness, consistency and flawless finish. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. 1925-0002
1 on hand

More Info/Options for Russ Wernimont Designs 6.25 in. Wide Wernimont Cobra Custom Front Fender for FXSTD 1925-0002

Custom Motorcycle Fenders

$125.99 Kustomwerks Steel Smooth Custom Rear Fender 11149
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393184
Kustomwerks Steel Smooth Custom Rear Fender: Manufacturer part # 11149 - Heavy duty fenders are made from 0.080" (14 gauge) steel. Formed in one piece for added strength. Unlike the normal two piece welded fenders these won't split or crack down the middle. The steel fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. All rear fenders are supplied raw and un-drilled for custom applications. , , NOTE: Always check fender fit and installation before painting. 11149
Expected Soon

More Info/Options for Kustomwerks Steel Smooth Custom Rear Fender 11149

Custom Motorcycle Fenders

CLEARANCE!
Was: $595.99
Now: $357.59
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-13 in. W for Rigid Frames 14010158
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392593
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-13 in. W for Rigid Frames: Manufacturer part # 14010158 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes (unless noted). A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come un-drilled so you can position them to look and work best for your application. Made in the U.S.A.. Inside Width at Mounting Point:12 7/8 in. Included Items: One taillight assembly with extension wire and instructions Empty 5-pin connector housing 6-Connector H-D wire interface assembly Two Turn Signal extension wires One Plug-in load equalizer Four Pairs 1/4 in.-20 x 1/2 in hex bolts and compression washers Dielectric grease pak Note: Fender must be prefitted before painting.. 14010158
1 on hand

More Info/Options for Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-13 in. W for Rigid Frames 14010158

Custom Motorcycle Fenders

CLEARANCE!
Was: $560.99
Now: $336.59
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-9 in. W for Rigid Frames 14010156
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392591
Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-9 in. W for Rigid Frames: Manufacturer part # 14010156 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes (unless noted). A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Made in the U.S.A.. Note: Fender must be prefitted before painting.. 14010156
1 on hand

More Info/Options for Russ Wernimont Designs Pro Street w/Light Kit Custom Rear Fender-9 in. W for Rigid Frames 14010156

Custom Motorcycle Fenders

$121.99 Kustomwerks Steel Smooth Custom Rear Fender 11147
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393183
Kustomwerks Steel Smooth Custom Rear Fender: Manufacturer part # 11147 - Heavy duty fenders are made from 0.080" (14 gauge) steel. Formed in one piece for added strength. Unlike the normal two piece welded fenders these won't split or crack down the middle. The steel fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. All rear fenders are supplied raw and un-drilled for custom applications. Mounting area width: 9-3/8 in.. , , NOTE: Always check fender fit and installation before painting. 11147
1 on hand

More Info/Options for Kustomwerks Steel Smooth Custom Rear Fender 11147

Custom Motorcycle Fenders

$161.99 NYC Custom Motorcycle Black Maltese Cross Derby Cover NYC65BK
Manufacturer: NYC Custom Motorcycle
Dennis Kirk Part #: 492084
NYC Custom Motorcycle Black Maltese Cross Derby Cover: Manufacturer part # NYC65BK - Big Twin billet aluminum covers. Made in the U.S.A.. NOTE: Dyna and all 07-08 applications will require the use of gasket part number 262986 or H26241. NYC65BK
1 on hand

More Info/Options for NYC Custom Motorcycle Black Maltese Cross Derby Cover NYC65BK

Custom Motorcycle Fenders

$290.99 Maier ATV Custom Rear Fender 18971
Manufacturer: Maier
Dennis Kirk Part #: 617243
Maier ATV Custom Rear Fender: Manufacturer part # 18971 - Fit each model precisely at a fraction of the OEM cost. Constructed of high-density polyethylene for unsurpassed strength. Use stock mounting hardware. INCLUDED ITEMS: One L bracket. One 1/4 in.-20 x 3/4 in. machine screw. One 1/4 in.-20 nylock nut. One 1/4 in. flat washer. One instruction sheet.. 18971
1 on hand

More Info/Options for Maier ATV Custom Rear Fender 18971

Custom Motorcycle Fenders

$189.99 NYC Custom Motorcycle Brass Footpegs p494413
Manufacturer: NYC Custom Motorcycle
Dennis Kirk Part #: 494413
NYC Custom Motorcycle Brass Footpegs: Manufacturer part # p494413 - Made from solid brass construction. Ball and oval milled design. Fits all custom applications. For matching shifter peg use part number 494412. p494413
1 on hand

More Info/Options for NYC Custom Motorcycle Brass Footpegs p494413

Custom Motorcycle Fenders

Custom Motorcycle Fenders