$701.99Wild Card One Piece 2 in. Stretched Softail Style Custom Gas Tank 20185
Manufacturer: Wild Card
Dennis Kirk Part #: 183623
Wild Card One Piece 2 in. Stretched Softail Style Custom Gas Tank: Manufacturer part # 20185 - One piece 2 in. stretched Softail style custom gas tank. Fits customer applications, uses pop up style gas cap - not included holds about 4 gallons. No expense was spared in the construction and finish quality of these gas tanks. All visible welds (when mounted on bike) have been finished and polished to give a nice smooth seamless appearance and then phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. The tank is mounted to the frame using either the supplied weld on front and rear brackets, or one of the weld on front brackets and the supplied Softail horse shoe style rear bracket. When the brackets have been installed they mount to the gas tank using a recessed rubber mounting system which isolates it from vibration and gives a nice flush look. Comes with a weld to frame brackets, Softail horse shoe style rear brackets, rubbers and mounting hardware, stainless filler bung, stainless 13/16 in. (22mm) petcock outlet and stainless breather tube. , , Dimensions: , Overall Length: 23.28 in., Tunnel Length: 19.70 in., Seat Pocket: 3.58 in., Tunnel Width: 2.0 in., Overall Width: 16.18 in., Height: 8.19 in., , NOTE: Before painting these steel gas tanks, we recommend that you mount the tank and check all frame and fork clearances. Gas tanks come with custom mountings including weld on mounting brackets/. We recommend a qualified welder mounts the brackets to the frame., NOTE: All gas tanks must be pressure tested, cleaned with tank cleaner and sealer before painting to protect the final finish and prevent internal rusting during winter storage. Always install the gas tank before painting to check fork, triple tree and handlebar control clearances.. 20185 1 on hand
$680.99Wild Card One Piece 3 in. Stretched Smoothie Custom Gas Tank 20163
Manufacturer: Wild Card
Dennis Kirk Part #: 183622
Wild Card One Piece 3 in. Stretched Smoothie Custom Gas Tank: Manufacturer part # 20163 - Fits Custom applications, uses pop-up style gas cap - not included holds about 4 gallons. No expense was spared in the construction and finish quality of these gas tanks. Instead of the usual butt welded construction the incorporate joggle lap and lap joints through out. This result in a much stronger gas tank without the worry of compromising the structural strength while providing a smooth surface finish. The joggle lap joints also allow the tunnel plate to be sunken below the bottom surface of the tank making grinding of the welds unnecessary. The tank is mounted to the frame using the supplied weld on brackets. When the brackets have been installed they mount to the gas tank using a recessed rubber mounting system which isolates it from vibration and gives a nice flush look. The gas tank has a grey phosphate etched finish to help prevent corrosion and to give a good surface for primers to adhere. Comes with weld to frame brackets, rubbers and mounting hardware, stainless filler bung, stainless 13/16 in. (22mm) petcock outlet, stainless breather tube and stainless rear mounted gas crossovers tapped for 1/8 in. - 27 NPT unions. Included Items: , (1) Gas Tank, (2) Support Brackets, (4) 1 1/2 in. Rubber Gromets, (4) 1 1/2 in. Flat Washers, (4) 5/16 in. x 1 1/4 in. Allen Bolts, , Dimensions: , Overall Length: 22.24 in., Tunnel Length: 19.21 in., Seat pocket length: 3.03 in., Tunnel Width: 3.48 in., Overall Width: 14.00 in., Height: 9.3 in., , NOTE: Before painting these steel gas tanks, we recommend that you mount the tank and check all frame and fork clearances. Gas tanks come with custom mountings including weld on mounting brackets. We recommend a qualified welder mounts the brackets to the frame., NOTE: All gas tanks must be pressure tested, cleaned with tank cleaner and sealer before painting to protect the final finish and prevent internal rusting during winter storage. Always install the gas tank before painting to check fork, triple tree and handlebar control clearances.. 20163 1 on hand
$246.99Custom Chrome Custom Bobber Style Gas Tank 600155
Manufacturer: Custom Chrome
Dennis Kirk Part #: 183257
Custom Chrome Custom Bobber Style Gas Tank: Manufacturer part # 600155 - An absolutely beautiful new tank designed with keen styling of Cole Foster Salinas Boyz Customs. The tank started a life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publication in 2002. The tank features a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. Fuel capacity is 2.35 gallons. NOTE: The applications require the front frame dash mount to be cut off and rear screw hole modified DIMENISIONS: Length: 17 1/4 in.. Width: 11 1/2 in.. Tunnel Length: 19 in.. TUNNEL WIDTH: Front: 2 11/16 in.. Rear: 2 3/4 in.. TUNNEL DEPTH Front: 6 1/4 in.. Rear: 1/4 in.. Tank Height: 10 1/2 in. Fuel Petcock: Left Front Petcock Thread Size: 22mm Gas Cap Type: Threaded INCLUDED ITEMS: One tank. Four rubber isolation pads. One front tank mount with bolts. Six mounting shims. Four 5/16" - 18 x 1-1/4" hex bolts. Six 5/16" flat washers. Two spacer washers. One pop-up threaded gas cap. , , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 600155 2 on hand
$137.99Paughco Custom 1-Piece Fatbob Style Gas Tank 820
Manufacturer: Paughco
Dennis Kirk Part #: 183278
Paughco Custom 1-Piece Fatbob Style Gas Tank: Manufacturer part # 820 - . A single cap, two petcock outlets. A high tunnel for the Fatbob look, one left side petcock outlet and a hole-to-hole center line on mounting brackets of 17 11/16 in. are featured on the Extra Wide Mustang. A left side external petcock outlet, indent on tank bottom for rocker box clearance and a hole-to-hole center line on mounting brackets of 19 3/4 in. are featured on the 1-piece Fatbob (19 1/2 in. L x 13 in. W x 8 in. D; Tunnel measures 2 3/16 in. W x 4 1/4 in. D). , DIMENSIONS: , Length: 20-1/2 in., Width: 13 in., Tunnel Length: 19 in., , TUNNEL WIDTH: , Front: 2-1/4 in., Rear: 2-1/4 in., , TUNNEL DEPTH: , Front: 4 in., Rear: 2 in., , Tank Height: 9-1/2 in., Fuel Petcock: Left center, Petcock Thread Size: 22mm, Gas Cap Thread: Cam style , NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings. , , NOTE: Will not work on any stock FXR or FLT, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 820 Expected Soon
$42.95Drag Specialties Custom One-Piece Gas Tank Mounting Kit 346103PBLB1
Manufacturer: Drag Specialties
Dennis Kirk Part #: 182831
Drag Specialties Custom One-Piece Gas Tank Mounting Kit: Manufacturer part # 346103PBLB1 - Kit includes front and rear tank mountsm rubber grommets and hardware. Fits most aftermarket Softail one-piece tanks on 1984-99 models.. 346103PBLB1 1 on hand
$477.99V-Factor Stretched Chopper Gas Tank for Custom Frames 81080
Manufacturer: V-Factor
Dennis Kirk Part #: 182816
V-Factor Stretched Chopper Gas Tank for Custom Frames: Manufacturer part # 81080 - Designed for custom frames with stretched backbones that will accept the 25" tunnel length (tunnel measures 2 1/2" wide. "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Rubber isolated mounting brackets to prevent vibration cracks. Includes chrome plated pop-up gas cap (replacement gas cap Part No. 18-2813). Tapped 1/8-27 NPT at rear of tank for gas crossover line (not included). Use with 13/16" (22mm) fuel valve. Holds 5.3 gallons, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81080 1 on hand
$477.99V-Factor Stretched Chopper Gas Tank for Custom Frame 81077
Manufacturer: V-Factor
Dennis Kirk Part #: 182814
V-Factor Stretched Chopper Gas Tank for Custom Frame: Manufacturer part # 81077 - Flush mounted pop-up style gas cap. Designed for custom frames with stretched backbones that will accept the 24" tunnel length (tunnel measures 2 1/2" wide). "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Rubber isolated mounting brackets to prevent vibration cracks. Includes chrome plated pop-up gas cap (replacement cap Part No. 18-2813). Tapped 1/8 27 NPT at rear of thank for gas crossover line (not included). Use with 13/16" (22mm) fuel valve, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81077 1 on hand
$542.99V-Factor Stretched Chopper Gas Tank for Custom Frames 81079
Manufacturer: V-Factor
Dennis Kirk Part #: 182815
V-Factor Stretched Chopper Gas Tank for Custom Frames: Manufacturer part # 81079 - Designed for custom frames with stretched backbones that will accept the 25.5" tunnel length (tunnel measures 2 1/2" wide). "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Rubber isolated mounting brackets to prevent vibration cracks. Includes chrome plated pop-up gas cap (replacement gas cap Part No. 18-2813). Tapped 1/8-27 NPT at rear of tank for crossover line (not included). Use with 13/16" (22mm) fuel valve. Holds 5.4 gallons, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81079 1 on hand
$52.99Custom Chrome Inferno Mini Gas Cap 27485
Manufacturer: Custom Chrome
Dennis Kirk Part #: 182756
Custom Chrome Inferno Mini Gas Cap: Manufacturer part # 27485 - Small 2 1/2 in diameter with three dimensional flames design look great on any bike. Chrome-plated die-cast construction with ratcheting mechanism that prevents over tightening. Fit all OEM gas tanks from 1982-1995 and most aftermarket gas tanks. , , Note: Matched cap set, left and right hand thread. 27485 6 on hand
$170.99Custom Chrome Fat Bob Extra Capacity Gas Tank 15294
Manufacturer: Custom Chrome
Dennis Kirk Part #: H181029
Custom Chrome Fat Bob Extra Capacity Gas Tank: Manufacturer part # 15294 - Fits FXST 84, all models with split tanks 85-99. Six-gallon tanks flatside fat bob gas tank. The classic Fat Bob profile, but a bit wider and taller than stock tanks. Unpainted steel. , , NOTE: Flexible steel, leather or plastic tank panels should be used to cover the gap between the tanks due to the slightly different shape, , NOTE: Does not include dash mounting spacer kit, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15294 7 on hand
$1.95Custom Chrome Rubber Mount for Flatside Gas Tanks DS391240
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18105
Custom Chrome Rubber Mount for Flatside Gas Tanks: Manufacturer part # DS391240 - Accurate reproductions of the OE parts used to mount flatside tanks, also used on top oil tank bracket. Works on 4-speed 85-86 models and all Softail models 84-99. Replaces OEM numbers 11447 (grommet) and 5775 (sleeve). Sold each.. DS391240 More than 10 on hand
$8.99Custom Chrome Plain Vented Gas Cap For Fat Bob Tanks 12725
Manufacturer: Custom Chrome
Dennis Kirk Part #: H181020
Custom Chrome Plain Vented Gas Cap For Fat Bob Tanks: Manufacturer part # 12725 - Available vented or unvented. Vented is for standard gas tanks and the right side of Fat Bob tanks. Unvented is for left side of Fat Bob tanks. Fit original equipment and replacement tanks with cam-style bungs. Replaces OEM number 61103-36.. 12725 3 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
