$436.99Samson Crossover Header Pipes FL-223
Manufacturer: Samson
Dennis Kirk Part #: 4400211
Samson Crossover Header Pipes: Manufacturer part # FL-223 - Chrome-plated, heli-arc welded true dual-header system. Eliminate the scavange pipe, which allows the system to quickly move the exhaust gases; improves air flow and reduces heat on the right side. Heat shields, clamps and mounting brackets included. Crossover-style headers accept mufflers designed for use on OEM 95-08 pipes, such as Samson Rolled Thunder or Silver Bullet®. Must purchase mufflers separately. Made in the U.S.A. Note: There is no warranty on exhaust and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, overheating, etc., and is not caused by defective manufacturing. See the Lubes/Chems section for products that help remove and protect against blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. FL-223 7 on hand
$550.99Samson Dual Exhaust Crossover Header Pipes S-330
Manufacturer: Samson
Dennis Kirk Part #: 440060
Samson Dual Exhaust Crossover Header Pipes: Manufacturer part # S-330 - Chrome-plated, heli-arc welded. Improves ground clearance. Includes all necessary mounting brackets. Full coverage heat shields included. Header system and mufflers sold separately. Header pipes and mufflers listed will not interchange with OEM components. Made in the U.S.A.. Will work with the following mufflers; Slash-cut 24", H44-4665 and Fishtail 27", H44-4664. , Note: , On models with saddlebags, always check clearance before running engine. , NOTE:There is no warranty on exhaust pipes in regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor rejetting, overheating, etc.; and is not caused by defective manufacturing. See our lubrication product section for products that will help prevent or remove blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. S-330 4 on hand
$522.99Samson Crossover Header Pipes S2-330
Manufacturer: Samson
Dennis Kirk Part #: 4401999
Samson Crossover Header Pipes: Manufacturer part # S2-330 - Chrome-plated, heli-arc welded true dual-header system. Eliminates the scavange pipe, which allows the system to quickly move the exhaust gases; improves air flow and reduces heat on the right side. Heat shields, clamps and mounting brackets included. Crossover-style headers accept Samson Silver Bullet slash-cut 24 in-H444665 or fishtail 27 in.-H444664. Must purchase mufflers separately. Made in the U.S.A... S2-330 2 on hand
$446.99Bassani Power Curve True-Dual Crossover Header Pipes FLH-211CL
Manufacturer: Bassani
Dennis Kirk Part #: 4402445
Bassani Power Curve True-Dual Crossover Header Pipes: Manufacturer part # FLH-211CL - Made from 16-gauge steel, finished in show-quality chrome and supplied with three custom-fit heat shields (reuse two existing heat shields). Direct bolt-on replacement for stock headpipes. Feature proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder. Offer improved low-end torque, appearance and an unmistakable exhaust tone. Crossover systems accept Bassani 4 in. mufflers listed or any 95-08 OEM-style mufflers (sold separately). Bassani 4 in. slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome finish. Muffler Options , Megaphone w/billet end cap 80-88 in. - 4402453, Megaphone w/billet end cap 95+ in. - 4402454, Slant-Cut 80-88 in. - 4402457, Slant-Cut 95+ in. - 4402458, Scalloped slash-cut 80-88 in. - 4402459, Scalloped slash-cut 95+ in. - 4402460. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See the Chems/Lubes section for products that will help to prevent or remove the blueing.. FLH-211CL 1 on hand
$491.99Bassani Power Curve True-Dual Crossover Header Pipes SFT-212
Manufacturer: Bassani
Dennis Kirk Part #: 4402424
Bassani Power Curve True-Dual Crossover Header Pipes: Manufacturer part # SFT-212 - Made from 16-gauge steel, finished in show-quality chrome and supplied with custom-fit heat shields. Direct bolt-on replacement for stock headpipes. Feature proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder. Offer improved low-end torque, appearance and an unmistakable exhaust tone. Crossover system will only accept Bassani's Softail slip-on mufflers - 4402425, 4402426 or 4403123 (sold separately), featuring 16-gauge steel construction, removable flow-through baffles and show-chrome finish. , NOTE: Header pipes and mufflers listed will not interchange with OEM components., , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See the Chems/Lubes section for products that will help to prevent or remove the blueing.. SFT-212 1 on hand
$436.99Samson Crossover Header Pipes for Dressers FL2-223
Manufacturer: Samson
Dennis Kirk Part #: 4402000
Samson Crossover Header Pipes for Dressers: Manufacturer part # FL2-223 - Chrome-plated, heli-arc welded true dual-header system. Eliminate the scavange pipe, which allows the system to quickly move the exhaust gases; improves air flow and reduces heat on the right side. Heat shields, clamps and mounting brackets included. Crossover-style headers accept mufflers designed for use on OEM 95-08 pipes, such as Samson Rolled Thunder or Silver Bullet®. Must purchase mufflers separately. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FL2-223 1 on hand
$441.99Bassani Power Curve True-Dual Crossover Header Pipes FLH-211
Manufacturer: Bassani
Dennis Kirk Part #: 4402444
Bassani Power Curve True-Dual Crossover Header Pipes: Manufacturer part # FLH-211 - Made from 16-gauge steel, finished in show-quality chrome and supplied with three custom-fit heat shields (reuse two existing heat shields). Direct bolt-on replacement for stock headpipes. Feature proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder. Offer improved low-end torque, appearance and an unmistakable exhaust tone. Crossover systems accept Bassani 4 in. mufflers listed or any 95-08 OEM-style mufflers (sold separately). Bassani 4 in. slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome finish. Muffler Options , Megaphone w/billet end cap 80-88 in. - 4402453, Megaphone w/billet end cap 95+ in. - 4402454, Slant-Cut 80-88 in. - 4402457, Slant-Cut 95+ in. - 4402458, Scalloped slash-cut 80-88 in. - 4402459, Scalloped slash-cut 95+ in. - 4402460. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See the Chems/Lubes section for products that will help to prevent or remove the blueing.. FLH-211 1 on hand
$446.99Bassani Power Curve True-Dual Crossover Header Pipes SFT-211
Manufacturer: Bassani
Dennis Kirk Part #: 4402423
Bassani Power Curve True-Dual Crossover Header Pipes: Manufacturer part # SFT-211 - Made from 16-gauge steel, finished in show-quality chrome and supplied with custom-fit heat shields. Direct bolt-on replacement for stock headpipes. Feature proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder. Offer improved low-end torque, appearance and an unmistakable exhaust tone. Crossover system will only accept Bassani's Softail slip-on mufflers - 4402425, 4402426 or 4403123 (sold separately), featuring 16-gauge steel construction, removable flow-through baffles and show-chrome finish. , NOTE: , Header pipes and mufflers listed will not interchange with OEM components., , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See the Chems/Lubes section for products that will help to prevent or remove the blueing.. SFT-211 1 on hand
$195.99Leo Vince MotoGP Stainless Steel Cat Eliminator Pipe 6680
Manufacturer: Leo Vince
Dennis Kirk Part #: 4402085
Leo Vince MotoGP Stainless Steel Cat Eliminator Pipe: Manufacturer part # 6680 - Leo Vince's experience with top teams from MotoGP went into the look and performance of these mufflers. Significant power and torque increases. TIG-welded AISI 304 stainless steel silencer and connectors are sandblasted with stainless steel particles for a "factory" finish. Muffler outlet features a removable noise reducer that reduces sound without restricting performance. Mount to the frame with carbon fiber brackets. Stainless steel cat eliminator pipe eliminates the OEM catalytic converter for track days or racing (link pipe may only be used with Leo Vince mufflers, not for use with stock mufflers); not intended for street use; include hardware to remove stock exhaust valve and to override OEM fuel-injection sensor, , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 6680 1 on hand
$363.99Akrapovic Optional Mid Pipes for Slip-On and Bolt-on Series Mufflers LS10SO3T1
Manufacturer: Akrapovic
Dennis Kirk Part #: 4402390
Akrapovic Optional Mid Pipes for Slip-On and Bolt-on Series Mufflers: Manufacturer part # LS10SO3T1 - Optional Mid Pipes for Akrapovic Slip-On and Bolt-on Series Mufflers. LS10SO3T1 1 on hand
$189.99Titanium Slip-On Mid-Pipe For Hindle Universal Mufflers YZF626SOTI
Manufacturer: Hindle
Dennis Kirk Part #: 4400730
Titanium Slip-On Mid-Pipe For Hindle Universal Mufflers: Manufacturer part # YZF626SOTI - Now you can mount a Hindle muffler to your OEM header pipe. Get the quality of a Hindle exhaust system in a convenient slip-on package. Titanium standard style slip-on mid pipe. Order two components: , Hindle mid-pipe and a Universal muffler. Mufflers sold separately; see selection below, , Hindle Universal Mufflers, - available with either stealth (street) or supersport (race) baffle, , Round Muffler with Supersport Baffle - Right-Side Exit 20 inch Polished Aluminum Part No. 44-7407. 20 inch Carbon Fiber Part No. 44-7359. 20 inch Titanium/Stainless Part No. 44-7408 , Oval Muffler with Supersport Baffle - Right-Side Exit 20 inch Polished Aluminum Part No. 44-7419. 20 inch Carbon Fiber Part No. 44-7417. 20 inch Titanium/Stainless Part No. 44-7427. 20 inch Full Titanium Part No. 44-9554 , Oval Muffler with Stealth Baffle - Right-Side Exit , 14 inch Polished Aluminum Part No. 44-00769. 16 inch Polished Aluminum Part No. 44-00771. 18 inch Polished Aluminum Part No. 44-00773. 20 inch Polished Aluminum Part No. 44-7420. 20 inch Blue Anodized Polished Aluminum Part No. 44-00710. 20 inch Red Anodized Polished Aluminum Part No. 44-00711. 14 inch Carbon Fiber Part No. 44-00774. 16 inch Carbon Fiber Part No. 44-00775. 18 inch Carbon Fiber Part No. 44-00776. 20 inch Carbon Fiber Part No. 44-7418. 14 inch Titanium/Stainless Part No. 44-00777. 16 inch Titanium/Stainless Part No. 44-00778. 18 inch Titanium/Stainless Part No. 44-00779. 18 inch Full Titanium Part No. 44-00780 , Oval Muffler with Stealth Baffle - Left-Side Exit 20 inch Polished Aluminum Part No. 44-9545 , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please refer to our Intake/Fuel section in the catalog, or perform a search using your make, model and year for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. YZF626SOTI 1 on hand
$644.99Stainless Steel High Exit Headpipe with Mid Pipe for use with Hindle Universal mufflers ZX1026HSS
Manufacturer: Hindle
Dennis Kirk Part #: 4400742
Stainless Steel High Exit Headpipe with Mid Pipe for use with Hindle Universal mufflers: Manufacturer part # ZX1026HSS - Super-strong stainless steel header design looks great and weighs less than stock. Boosts your bikes torque and horsepower throughout the entire rpm range. High-exit exhaust. Order two components: , Headpipe with mid-pipe and Universal Muffler, , Hindle Universal Mufflers, - available with either stealth (street) or supersport (race) baffle, , Round Muffler with Supersport Baffle - Right-Side Exit 20 inch Polished Aluminum Part No. 44-7407. 20 inch Carbon Fiber Part No. 44-7359. 20 inch Titanium/Stainless Part No. 44-7408 , Oval Muffler with Supersport Baffle - Right-Side Exit 20 inch Polished Aluminum Part No. 44-7419. 20 inch Carbon Fiber Part No. 44-7417. 20 inch Titanium/Stainless Part No. 44-7427. 20 inch Full Titanium Part No. 44-9554 , Oval Muffler with Stealth Baffle - Right-Side Exit , 14 inch Polished Aluminum Part No. 44-00769. 16 inch Polished Aluminum Part No. 44-00771. 18 inch Polished Aluminum Part No. 44-00773. 20 inch Polished Aluminum Part No. 44-7420. 20 inch Blue Anodized Polished Aluminum Part No. 44-00710. 20 inch Red Anodized Polished Aluminum Part No. 44-00711. 14 inch Carbon Fiber Part No. 44-00774. 16 inch Carbon Fiber Part No. 44-00775. 18 inch Carbon Fiber Part No. 44-00776. 20 inch Carbon Fiber Part No. 44-7418. 14 inch Titanium/Stainless Part No. 44-00777. 16 inch Titanium/Stainless Part No. 44-00778. 18 inch Titanium/Stainless Part No. 44-00779. 18 inch Full Titanium Part No. 44-00780 , Oval Muffler with Stealth Baffle - Left-Side Exit 20 inch Polished Aluminum Part No. 44-9545 , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made. If a jet kit or Power Commander is recommended please refer to the Intake/Fuel section in the catalog or perform a search using your make, model and year for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixuture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any kind of warranty. Please refer to the Chems/Lubes section for products to help remove or prevent exhaust discoloration. ZX1026HSS 1 on hand
