$355.95Cobra Classic Slip On Mufflers with Tips 1213
Manufacturer: Cobra
Dennis Kirk Part #: 4400254
Cobra Classic Slip On Mufflers with Tips : Manufacturer part # 1213 - Brilliant chrome finish over high-quality, heavy-gauge steel. A deeper, more mellow sound than stock. Slip-on design utilizes the stock headpipes. Dual chrome muffler style; one per side. Baffles are removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1213 Expected Soon
$379.99Roadhouse Fishtail Moto Classic Slip-On Mufflers 54-350
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401724
Roadhouse Fishtail Moto Classic Slip-On Mufflers: Manufacturer part # 54-350 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated. , , Included Items: , (2) Mufflers, (2) Exhaust Clamps, (2) 10mm Nuts, (2) 10mm Flat Washers, (1) Instructions, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 54-350 Expected Soon
$474.99Roadhouse Shark Fin Moto Classic Slip-On Mufflers 58-220
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401727
Roadhouse Shark Fin Moto Classic Slip-On Mufflers: Manufacturer part # 58-220 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated, , Included Items: , (2) Mufflers, (1) Rear head pipe, (1) Rear head pipe shield, (1) Exhaust flange, (1) Muffler bracket, (1) Front head pipe adapter, (1) Front head pipe adapter heat shield, (2) 5/16 in. x 1 in. Flange head bolts, (2) 5/16 in. Flange head nuts, (2) 5/16 in. washers, (2) 1-3/4 in. Heavy duty hose clamps(Mufflers), (2) 1-3/4 in. Std. duty hose clamps(Heat Shield), (1) 1-3/4 in. Std. duty hose clamps(Adaptor shield), (1) 1-1/4 in. Std. duty hose clamps, , Tips For Moto Classic Mufflers . Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product, NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty.. 58-220 Expected Soon
$446.99Roadhouse Tapered Moto Classic Slip-On Mufflers 58-240
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401730
Roadhouse Tapered Moto Classic Slip-On Mufflers: Manufacturer part # 58-240 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated. , , Included Items: , (2) Mufflers with Tapered Tips, (1) Rear Head Pipe, (1) Rear Head Pipe Heat Shield, (1) Muffler Bracket, (1) Exhaust Flange, (1) Front Head Pipe Adapter w/Heat Shield, (6) Hose Clamps, (2) 5/16 in.-18 in. x 1 in. Flange Bolts, (2) 5/16 in. Flange Nuts, (2) 5/16 in. Washers, (1) Instructions, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 58-240 Expected Soon
$446.99Roadhouse Slash-Cut Moto Classic Slip-On Mufflers 58-200
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401725
Roadhouse Slash-Cut Moto Classic Slip-On Mufflers: Manufacturer part # 58-200 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated, , Included Items: , (2) Mufflers, (1) Rear head pipe, (1) Rear head pipe heat shield, (1) Exhaust flange, (1) Muffler bracket, (1) Front head pipe adapter, (1) Front head pipe adapter heat shield, (2) 5/16 in. x 1 in. Flange head bolts, (2) 5/16 in. Flange head nuts, (2) 5/16 in. washers, (2) 1-3/4 in. Heavy duty hose clamps(muffler), (2) 1-3/4 in. Std. duty hose clamps(heat shield), (1) 1-3/4 in. Std. duty hose clamps(adaptor shield), (1) 1-1/4 in. Std. duty hose clamps, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 58-200 1 on hand
$474.99Roadhouse Cadillac Moto Classic Slip-On Mufflers 58-225
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401728
Roadhouse Cadillac Moto Classic Slip-On Mufflers: Manufacturer part # 58-225 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product, NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty.. 58-225 Expected Soon
$379.99Roadhouse Shark Fin Moto Classic Slip-On Mufflers 54-330
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401720
Roadhouse Shark Fin Moto Classic Slip-On Mufflers: Manufacturer part # 54-330 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2" diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated. Included Items: , (2) Mufflers, (2) Exhaust Clamps, (2) 10mm-1.25 Hex Nuts, (2) 10mm Flat Washers, (1) Instructions, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 54-330 1 on hand
$474.99Roadhouse Shark Fin Moto Classic Slip-On Mufflers 58-250
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401731
Roadhouse Shark Fin Moto Classic Slip-On Mufflers: Manufacturer part # 58-250 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated, , Included Items: , (2) Mufflers with Shark Fin Tip, (1) Rear Head Pipe, (1) Rear Head Pipe Heat Shield, (1) Muffler Bracket, (1) Exhaust Flange, (1) Front Head Pipe Adapter w/Heat Shield, (6) Hose Clamps, (2) 5/16 in.-18 in. x 1 in. Flange Bolts, (2) 5/16 in. Flange Nuts, (2) 5/16 in. Washers, (1) Instructions, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks, ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 58-250 1 on hand
$446.95Roadhouse Tapered Moto Classic Slip-On Mufflers 58-210
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401726
Roadhouse Tapered Moto Classic Slip-On Mufflers: Manufacturer part # 58-210 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated. , , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 58-210 1 on hand
$351.99Roadhouse Tapered Moto Classic Slip-On Mufflers 54-340
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401722
Roadhouse Tapered Moto Classic Slip-On Mufflers: Manufacturer part # 54-340 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated. , , Included Items: , (2) Mufflers, (2) Exhaust Clamps, (2) 10mm-1.25 Hex Nuts, (2) 10mm Flat Washers, Instructions, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 54-340 1 on hand
$446.99Roadhouse Tapered Moto Classic Slip-On Mufflers 56-215
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401734
Roadhouse Tapered Moto Classic Slip-On Mufflers: Manufacturer part # 56-215 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated. , , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, , Slash-cut tips can be rotated for a variety of different looks, , Included Items: , (2) Mufflers, (1) Mounting Bracket, (1) Flange, (6) Hose Clamps, (2) 5/16 in.-18 in. x 1 in. Flange Bolts, (2) 5/16 in. Flange Nuts, (2) 5/16 in. Flat Washers, Instructions Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 56-215 1 on hand
$446.99Roadhouse Slash-Cut Moto Classic Slip-On Mufflers 58-230
Manufacturer: Roadhouse
Dennis Kirk Part #: 4401729
Roadhouse Slash-Cut Moto Classic Slip-On Mufflers: Manufacturer part # 58-230 - New Moto Classic slip-ons replace the older-style one-piece mufflers. Larger, 3 1/2 in. diameter muffler canister produces a deep, meaty rumble. Shroud-type front end of the muffler produces a clean line and hides any unsightly blueing that may occur at the junction. Also feature removable baffles and interchangeable tips. Beautifully polished and chrome plated, , Included Items: , (2) Mufflers with Slash Tips, (1)Rear Head Pipe, (1)Rear Head Pipe Heat Shield, (1) Muffler Bracket, (1) Exhaust Flange, (1) Front Head Pipe Adapter w/Heat Shield, (6) Hose Clamps, (2) 5/16 in.-18 in. x 1 in. Flange Bolts, (2) 5/16 in. Flange Nuts, (2) 5/16 in. Washers, (1) Instructions, , Tips For Moto Classic Mufflers Tapered - part no. 449707 Slash - part no. 449708 Shark fin - part no. 449709 Cadillac - part no. 4400104, ,. Slash-cut tips can be rotated for a variety of different looks Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 58-230 Expected Soon
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
