$94.95Drag Specialties Drag Flame 1 1/4 in. Tattoo Handlebar pH59143 596143
Manufacturer: Drag Specialties
Dennis Kirk Part #: 596143
Drag Specialties Drag Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # pH59143 - DennisKirk Part # 596143 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59143 Expected Soon
$164.95Drag Specialties 12.5 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59152 596144
Manufacturer: Drag Specialties
Dennis Kirk Part #: 596144
Drag Specialties 12.5 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # pH59152 - DennisKirk Part # 596144 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59152 Expected Soon
$164.95Drag Specialties 14 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar p596148 596145
Manufacturer: Drag Specialties
Dennis Kirk Part #: 596145
Drag Specialties 14 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # p596148 - DennisKirk Part # 596145 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. p596148 Expected Soon
$164.95Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59153 596146
Manufacturer: Drag Specialties
Dennis Kirk Part #: 596146
Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # pH59153 - DennisKirk Part # 596146 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59153 Expected Soon
$199.95Drag Specialties 14 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar p596148
Manufacturer: Drag Specialties
Dennis Kirk Part #: 596148
Drag Specialties 14 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # p596148 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. p596148 Expected Soon
$112.99LA Choppers 1 1/4 in. Honda Handlebar Risers - 1.25 in. 1 1/4
Manufacturer: LA Choppers
Dennis Kirk Part #: 595384
LA Choppers 1 1/4 in. Honda Handlebar Risers - 1.25 in.: Manufacturer part # 1 1/4 - Allows you to install LA Choppers handlebars, or other handlebars with a 1 1/4" mounting section on your metric cruiser. Bright chrome finish. Honda risers have 7/16" -14 mounting studs, not for VTX models. 1 1/4 1 on hand
$112.99LA Choppers 1 1/4 in. Yamaha Handlebar Risers - 1.25 in. 1 1/4
Manufacturer: LA Choppers
Dennis Kirk Part #: 595385
LA Choppers 1 1/4 in. Yamaha Handlebar Risers - 1.25 in. : Manufacturer part # 1 1/4 - Allows you to install LA Choppers handlebars, or other handlebars with a 1 1/4" mounting section on your metric cruiser. Bright chrome finish. Yamaha risers have M12x1.25 mounting studs and can also be used on all Honda VTX models and 05-07 Victory models. For Honda risers which have 7/16" -14 mounting stud and are not for VTX models, order DK part no. 595384. For Kawasaki risers which have M10x1.5 mounting studs and can also be used on 04 Victory models, order DK part no. 595386. Risers sold as a set.. 1 1/4 1 on hand
$112.99LA Choppers 1 1/4 in. Kawasaki Handlebar Risers - 1.25 in. 1 1/4
Manufacturer: LA Choppers
Dennis Kirk Part #: 595386
LA Choppers 1 1/4 in. Kawasaki Handlebar Risers - 1.25 in.: Manufacturer part # 1 1/4 - Allows you to install LA Choppers handlebars, or other handlebars with a 1 1/4" mounting section on your metric cruiser. Bright chrome finish. Kawasaki risers have M10x1.5 mounting studs and can also be used on 04 Victory models. For Yamaha risers which have M12x1.25 mounting studs and can also be used on all Honda VTX models as well as 05-07 Victory models, order DK part no. 595385. For Honda risers which have 7/16" -14 mounting studs and are not for VTX models, order DK part no. 595384. Risers sold as a set.. 1 1/4 1 on hand
$10.99Woodys Track Cutter 1/4 in. DRIL-1/4
Manufacturer: Woodys
Dennis Kirk Part #: 28491
Woodys Track Cutter 1/4 in.: Manufacturer part # DRIL-1/4 - Stud pattern drilling made quick and easy. Use for all types of studs; cuts a fabulous clean hole.. DRIL-1/4 More than 10 on hand
$112.99LA Choppers 1 1/2 in. Risers for 1 1/4 in. Handlebars 1 1/4
Manufacturer: LA Choppers
Dennis Kirk Part #: 595383
LA Choppers 1 1/2 in. Risers for 1 1/4 in. Handlebars: Manufacturer part # 1 1/4 - Fit LA Choppers handlebars or other handlebars with a 1 1/4" diameter clamping area. 1/2" -13 threads. Polished chrome finish. Sold in pairs.. 1 1/4 2 on hand
$162.95Drag Specialties Buffalo 12 1/2 in. Apehanger Bar pH59773 596170
Manufacturer: Drag Specialties
Dennis Kirk Part #: 596170
Drag Specialties Buffalo 12 1/2 in. Apehanger Bar: Manufacturer part # pH59773 - DennisKirk Part # 596170 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59773 Expected Soon
$213.99Wild 1 Inc. 14 in. Ape Hanger Bars p59621
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 596211
Wild 1 Inc. 14 in. Ape Hanger Bars: Manufacturer part # p59621 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chrome finish. Work with hydraulic clutch, stock and most custom controls, stock risers and top clamps. Standard bars have a 5 1/8 in. clamp area width. Springer bars have a 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mounting holes. Made in the U.S.A.. , , NOTE: Not dimpled. p59621 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
