|
|
$645.99
Stainless Steel/Canister Muffler Yoshimura 2-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve
Dennis Kirk Part #: 4400529
Stainless Steel/Canister Muffler Yoshimura 2-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve: Manufacturer part # 1112055 - The standard to which all other race exhausts are measured. Race track proven by Yoshimura Suzuki AMA Superbike Race Team. The people who hand pack four time AMA champion Mat Mladin's RS-3 muffler pay the same meticulous attention to detail when making your exhaust system. Header construction is stainless steel. Stainless steel quick-release mufflers. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1112055
1 on Hand
More Info/Options for Stainless Steel/Canister Muffler Yoshimura 2-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve
|
|
|
|
$296.99
Stainless Steel Yoshimura RS-3 Round Zyclone Bolt-On with Polished Stainless Steel Muffler Sleeve and Race Baffle
Dennis Kirk Part #: 449269
Stainless Steel Yoshimura RS-3 Round Zyclone Bolt-On with Polished Stainless Steel Muffler Sleeve and Race Baffle: Manufacturer part # CB932SO - Yoshimura is the largest sportbike aftermarket pipe manufacturer in the world. Excellent ground clearance from slim profile muffler. Noise levels are kept down using a two-stage stainless steel baffle that does not restrict exhaust flow. RS-3 slip-on muffler features a hard-mount muffler with no springs. Mounts to OEM mid-pipe. Round body with race baffle. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. CB932SO
1 on Hand
More Info/Options for Stainless Steel Yoshimura RS-3 Round Zyclone Bolt-On with Polished Stainless Steel Muffler Sleeve and Race Baffle
|
|
|
|
$786.99
Stainless Steel/Canister Muffler/4-Into-1 Muffler Pipe Yoshimura 4-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve
Dennis Kirk Part #: 430417
Stainless Steel/Canister Muffler/4-Into-1 Muffler Pipe Yoshimura 4-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve : Manufacturer part # CB136RR - The standard to which all other race exhausts are measured. Race track proven by Yoshimura Suzuki AMA Superbike Race Team. The people who hand pack four time AMA champion Mat Mladin's RS-3 muffler pay the same meticulous attention to detail when making your exhaust system. Header construction is stainless steel. Stainless steel quick-release mufflers. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. CB136RR
1 on Hand
More Info/Options for Stainless Steel/Canister Muffler/4-Into-1 Muffler Pipe Yoshimura 4-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve
|
|
|
|
$645.99
Stainless Steel/Canister Muffler Yoshimura 2-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve
Dennis Kirk Part #: 449187
Stainless Steel/Canister Muffler Yoshimura 2-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve: Manufacturer part # 1111055 - The standard to which all other race exhausts are measured. Race track proven by Yoshimura Suzuki AMA Superbike Race Team. The people who hand pack four time AMA champion Mat Mladin's RS-3 muffler pay the same meticulous attention to detail when making your exhaust system. Header construction is stainless steel. Stainless steel quick-release mufflers. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1111055
1 on Hand
More Info/Options for Stainless Steel/Canister Muffler Yoshimura 2-into-1 RS-3 Oval Race Exhaust System with Stainless Steel Header Pipe and Muffler Sleeve
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$41.95
AMS Steel Replacement Wheel 551063
Dennis Kirk Part #: 551063
AMS Steel Replacement Wheel 551063: Manufacturer part # AMS134 - Please note: Customer determines position based on size specs , , Replacement steel wheels for many ATV applications. High-quality wheels, reasonable prices. Tough silver finish. Large Bell Design. NOTE: Lug nuts are not available for these rims. Center caps are sold separately Front and Rear: KXT250 Tecate 1984. All models listed are for Rear only Aftermarket wheels are not exact matches for OEM wheels. This wheel is specified for every model that it will bolt onto, regardless of the original wheel?s width, diameter, offset and other specifications. It is your responsibility to determine whether it has similar specifications to your original wheel or not, and whether a tire size change is necessary when fitting it. When changing wheel offset, width, diameter or tire size from the original, you must check clearance for the brakes, a-arms, fenders and any other items that the wheel or tire may interfere with before mounting a tire on the wheel or the assembly to your ATV. If the replacement wheel's offset does not match the original exactly, it is better to have less offset in and more offset out to eliminate possible clearance issues. For additional information, including your original wheel sizes and offset, refer to our printed catalog or contact us.. AMS134
3 on Hand
More Info/Options for AMS Steel Replacement Wheel 551063
|
|
|
|
$41.95
AMS Steel Replacement Wheel 551062
Dennis Kirk Part #: 551062
AMS Steel Replacement Wheel 551062: Manufacturer part # AMS133 - Please note: Customer determines position based on size specs , , Replacement steel wheels for many ATV applications. High-quality wheels, reasonable prices. Tough silver finish. Large Bell Design. NOTE: Lug nuts are not available for these rims. Center caps are sold separately Lug Nut Requirement: Flat Aftermarket wheels are not exact matches for OEM wheels. This wheel is specified for every model that it will bolt onto, regardless of the original wheel's width, diameter, offset and other specifications. It is your responsibility to determine whether it has similar specifications to your original wheel or not, and whether a tire size change is necessary when fitting it. When changing wheel offset, width, diameter or tire size from the original, you must check clearance for the brakes, a-arms, fenders and any other items that the wheel or tire may interfere with before mounting a tire on the wheel or the assembly to your ATV. If the replacement wheel's offset does not match the original exactly, it is better to have less offset in and more offset out to eliminate possible clearance issues. For additional information, including your original wheel sizes and offset, refer to our printed catalog or contact us.. AMS133
3 on Hand
More Info/Options for AMS Steel Replacement Wheel 551062
|
|
