|
|
CLOSEOUT!
Was: $878.99
Now: $769.99
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182957
Dennis Kirk Part #: 182957
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182957: Manufacturer part # 07010110 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Short, curved bottom, 23 3/4 in. L. Must use a L96-05 vented gas cap and 22mm petcock (sold separately). Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 07010110
2 on Hand
More Info/Options for Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182957
|
|
|
|
$789.99
H18825 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18825
H18825 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 07010002 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Streamline. Pointed at the rear with sqaure end. Notched for seat tube clearance. Capacity is approximately 4.5 gal.. 27" L X 11" W. Screw-in cap Bung. Work well with arched backbone frames, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010002
1 on Hand
More Info/Options for H18825 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$958.99
H18843 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18843
H18843 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 19140131 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Straight-up. 4" Square end Capacity is approximately 3.7 gal.. 25" L X 11" W. Matt Hotch pop-up cap, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 19140131
1 on Hand
More Info/Options for H18843 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18828 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18828
H18828 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 07010004 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Chopper. Square end and rounded sides. Capacity is approximately 4.5 gal.. 27" L X 11" W. Screw-in cap bung, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010004
1 on Hand
More Info/Options for H18828 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18832 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18832
H18832 Independent Gas Tank Company Stretch Tanks: Manufacturer part # CS2 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Chopper. 11" wide with square end. Capacity is approximately 3.7 gal.. 25" L X 11" W. Screw-in cap Bung, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. CS2
1 on Hand
More Info/Options for H18832 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$958.99
Independent Gas Tank Company Whiskey Side 2 in. Stretch Tank w/Pop-Up Cap 183013
Dennis Kirk Part #: 183013
Independent Gas Tank Company Whiskey Side 2 in. Stretch Tank w/Pop-Up Cap 183013: Manufacturer part # WHISKEY - Handcrafted tanks are quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. All styles have four mounts on the tank bottom and all but Bobber have tunnel width of 2 1/4 in.. Bobber tanks feature a tunnel width of 2 1/2 in.. Other features include: 22mm petcock fitting, 1/8 in. NPT threaded crossover fittings and screw-in cap or Hot Match pop-up flush cap; some styles available with spinner cap. Custom mounting required; will not fit frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE: Whiskey Side has 22mm petcock fitting on left side of tank, , NOTE: Not for use on fuel injected models, , NOTE: This item ships 3-4 business days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. WHISKEY
1 on Hand
More Info/Options for Independent Gas Tank Company Whiskey Side 2 in. Stretch Tank w/Pop-Up Cap 183013
|
|
|
|
$958.99
H18857 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18857
H18857 Independent Gas Tank Company Stretch Tanks: Manufacturer part # DS391718 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Aero. Pointed at the rear. Notched for seat tube clearance. Capacity is approximately 5 gal.. 25" L X 14" W. Matt Hotch pop-up cap, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. DS391718
1 on Hand
More Info/Options for H18857 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
H18830 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18830
H18830 Independent Gas Tank Company Stretch Tanks: Manufacturer part # 07010006 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Chopper. 11" wide with square end and rounded sides. Capacity is approximately 3.7 gal.. 25" L X 11" W. Screw-in cap Bung, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw-in caps use 82-E96 style caps (sold separately), , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010006
1 on Hand
More Info/Options for H18830 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$958.99
H18893 Independent Gas Tank Company Stretch Tanks
Dennis Kirk Part #: H18893
H18893 Independent Gas Tank Company Stretch Tanks: Manufacturer part # DS391725 - Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. 22mm petcock fitting. 1/8" NPT threaded crossover fittings. Require custom mounting; will not work on frames with standard Fat Bob tank mounts. Made in the U.S.A., , TANK STYLE - Streamline. Pointed at the rear and notched for seat tube clearance. Capacity is approximately 3.7 gal.. 27" L X 11" W. Matt Hotch Pop-up cap, , NOTE: Not for use on fuel-injected models, , NOTE: The use of a custom seat is required, , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. DS391725
1 on Hand
More Info/Options for H18893 Independent Gas Tank Company Stretch Tanks
|
|
|
|
$789.99
Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Pointed End and Screw-in Cap 182579
Dennis Kirk Part #: 182579
Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Pointed End and Screw-in Cap 182579: Manufacturer part # BOBBER - Handcrafted tanks are quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. All styles have four mounts on the tank bottom and all but Bobber have tunnel width of 2 1/4". Bobber tanks feature a tunnel width of 2 1/2". Other features include: 22mm petcock fitting, 1/8" NPT threaded crossover fittings and screw-in cap or Hot Match pop-up flush cap. Custom mounting required; will not fit frames with standard Fat Bob tank mounts. Made in the U.S.A.. Bobber: square 2 1/4" at the rear or pointed end. , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw bungs use 82-E96 style caps (sold separately), , NOTE: This items ships 3-4 days after order is placed, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. BOBBER
1 on Hand
More Info/Options for Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Pointed End and Screw-in Cap 182579
|
|
|
|
$789.99
Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Square End and Screw-in Cap 182577
Dennis Kirk Part #: 182577
Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Square End and Screw-in Cap 182577: Manufacturer part # BOBBER - Handcrafted tanks are quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Four mounts on the tank bottom and feature a tunnel width of 2 1/2". Other features include: 22mm petcock fitting, 1/8" NPT threaded crossover fittings and screw-in cap bung. Custom mounting required; will not fit frames with standard Fat Bob tank mounts. Made in the U.S.A. Tank Syle - Bobber: square 2 1/4" end, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw bungs use 82-E96 style caps (sold separately), , NOTE: This item is shipped 3-4 days after the order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. BOBBER
1 on Hand
More Info/Options for Independent Gas Tank Company 4 in Stretch Bobber Tank w/ Square End and Screw-in Cap 182577
|
|
|
|
$789.99
H18844 Independent Gas Tank Company 2 in. Stretch Tank
Dennis Kirk Part #: H18844
H18844 Independent Gas Tank Company 2 in. Stretch Tank: Manufacturer part # 19140132 - 2.5 gallon tank. Tank is 22 in. L x 11 in. W. Handcrafted tank is quality constructed using 16-gauge cold-rolled steel. Each tank has been TIG welded, then pressure tested to the highest standards. Has four mounts on the tank bottom and a tunnel width of 2 1/4 in.. Other features include: 22mm petcock fitting, threaded crossover fittings and screw-style bung or HotMatch pop-up flush cap. Custom mounting required; will not fit frames with standard Fat Bob tank mounts. Made in the U.S.A.. , Tank Style-Straight-Up: Point end; use screw-in cap, , NOTE: The use of a custom seat is required, , NOTE: Tanks with screw bungs use 82-E96 style caps, , NOTE: This item ships 3-4 days after order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 19140132
1 on Hand
More Info/Options for H18844 Independent Gas Tank Company 2 in. Stretch Tank
|
|
