Charging System

$211.99 Mid USA 32 Amp Alternator Kit/Charging System 17805
Manufacturer: Mid USA
Dennis Kirk Part #: 211161
Mid USA 32 Amp Alternator Kit/Charging System: Manufacturer part # 17805 - Use this 32 amp alternator charging system to keep all of your buzzers, bells, lights and whistles fully powered and well illuminated. Kit includes stator, rotor, voltage regulator and mounting hardware. A must for bikes with multiple lights or light rails and a definite necessity for those towing a trailer. For Big Twin 4-speed 70-85, FLT 80-98 (except models with EFI), FXR 82-94, Dyna 91-98, Softail 84-00; OE on Big Twin 89-98 and Softail models 89-00 (except models with electronic fuel injection). Replaces OEM NO. 29985-87.. 17805
7 on hand

More Info/Options for Mid USA 32 Amp Alternator Kit/Charging System 17805

Charging System

$360.99 Thunder Heart Three-Phase Charging System ASM2005
Manufacturer: Thunder Heart
Dennis Kirk Part #: 201528
Thunder Heart Three-Phase Charging System: Manufacturer part # ASM2005 - A 32A narrow-rotor converts original single-phase systems to three-phase systems on Evolution or S&S Evolution motors. System is digitally calibrated for the maximum charging level over a wide range of temperatures. Billet aluminum regulator housing has a highly polished finish. Features self-regulating temperature compensation to reduce heat and extend system life; an over-temperature protection system prevents catastrophic heat failure under extreme conditions. Highly efficient conversion means more current at lower engine speeds, which means easier starting and longer battery life. More current is also available for EFI and other electronic accessories. Full charge is reached at 550-650 rpm; factory system reaches full charge at 1000 rpm. System is designed primarily for custom applications.. ASM2005
1 on hand

More Info/Options for Thunder Heart Three-Phase Charging System ASM2005

Charging System

$269.95 Drag Specialties Charging System MW5355
Manufacturer: Drag Specialties
Dennis Kirk Part #: 201348
Drag Specialties Charging System: Manufacturer part # MW5355 - 38A kits are great for new customs or stock replacement. Good-looking chrome regulator. Kits include stator (OEM #30017-01), rotor (OEM #29981-95) and regulator (OEM #74610-01). Rotor, stator and regulator also available separately, Rotor - Part No. 201345, Stator - Part No. 201346, Regulator - Part No. 201347. MW5355
2 on hand

More Info/Options for Drag Specialties Charging System MW5355

Charging System

$245.99 CompuFire 32 AMP Charging System Kit 55520
Manufacturer: CompuFire
Dennis Kirk Part #: H21231
CompuFire 32 AMP Charging System Kit: Manufacturer part # 55520 - Stator, rotor and a black series-type regulator in a complete kit. Stator load and engine drag are reduced by series-type regulator. Rotor replaces OEM number 29957-81B; stator replaces OEM number 29970-88. , NOTE: Not for fuel injected models. 55520
3 on hand

More Info/Options for CompuFire 32 AMP Charging System Kit 55520

Charging System

$392.99 CompuFire 40 Amp 3-Phase Charging System 55560
Manufacturer: CompuFire
Dennis Kirk Part #: 201366
CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55560 - Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Vented rotor for enclosed Primary drive. Note: '96-'98 FLT models require regulator mount H49-633 .. 55560
3 on hand

More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55560

Charging System

$244.99 Accel Charging System Kit - 32 amp p208515
Manufacturer: Accel
Dennis Kirk Part #: 208515
Accel Charging System Kit - 32 amp: Manufacturer part # p208515 - Rotors are heavy-duty and feature magnets that are enclosed in stainless steel. Cracks are eliminated by the superthick hub and splines. Precision-wound stator. The regulator controls everything.. p208515
Expected Soon

More Info/Options for Accel Charging System Kit - 32 amp p208515

Charging System

$392.99 CompuFire 40 Amp 3-Phase Charging System 55576
Manufacturer: CompuFire
Dennis Kirk Part #: 201902
CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55576 - Fits non-vented rotors with an open primary drive. Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced non-vented rotor. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Non-vented rotor for open primary drive. Note: '99-'02 FLT models require regulator mount H49-633 .. 55576
1 on hand

More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55576

Charging System

$392.99 CompuFire 40 Amp 3-Phase Charging System 55570
Manufacturer: CompuFire
Dennis Kirk Part #: 201368
CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55570 - Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced rotor. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Non-vented rotor for open Primary drive. Note: '96-'98 FLT models require regulator mount H49-633 .. 55570
2 on hand

More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55570

Charging System

$392.99 CompuFire 40 Amp 3-Phase Charging System 55565
Manufacturer: CompuFire
Dennis Kirk Part #: 201367
CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55565 - Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Vented rotor for closed Primary drive. Note: '03-'05 FLT models require regulator mount H49-633 .. 55565
1 on hand

More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55565

Charging System

$392.99 CompuFire 40 Amp 3-Phase Charging System 55575
Manufacturer: CompuFire
Dennis Kirk Part #: 201369
CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55575 - Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced rotor. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Non-vented rotor for open primary drive. Note: '03-'05 FLT models require regulator mount H49-633 .. 55575
1 on hand

More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55575

Charging System

$392.99 CompuFire 40 Amp 3-Phase Charging System 55566
Manufacturer: CompuFire
Dennis Kirk Part #: 201903
CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55566 - Fits listed models with a vented rotor and enclosed primary drive. Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Vented rotor for enclosed Primary drive. Note: '99-'02 FLT models require regulator mount H49-633 .. 55566
1 on hand

More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55566

Charging System

$516.99 CompuFire 90 amp/1325 watt Charging System w/ Battery 58100
Manufacturer: CompuFire
Dennis Kirk Part #: 210505
CompuFire 90 amp/1325 watt Charging System w/ Battery: Manufacturer part # 58100 - This system is designed to exceed new bike specs. The Compu-Fire charging system consists of the 90 amp/HD-1325 Alternator and a GEN III sealed maintenance free battery with 350 cold cranking amps and temperature-compensated voltage regulator. The alternator is the latest third Generation design featuring temperature compensated voltage regulation for optimum battery performance, matched voltage output for modern maintenance free batteries, and all components are brand new (NOT RE-MANUFACTURED). The Compu-Fire sealed battery is maintenance free, operates at an average of 0.5 to 0.75 volts higher than the original and provides 40 extra cold cranking amps. Starting is now crisper, ignition is stronger and lights are brighter. Riders can now operate high power accessories with complete peace of mind and eliminate carrying extra batteries. Made in the U.S.A.. NOTE: Not for use with OEM battery. Must use the sealed battery.. 58100
1 on hand

More Info/Options for CompuFire 90 amp/1325 watt Charging System w/ Battery 58100

Charging System

Charging System