$72.99Pingel Low Mount CB Antenna Relocation Kit 32137
Manufacturer: Pingel
Dennis Kirk Part #: 407740
Pingel Low Mount CB Antenna Relocation Kit : Manufacturer part # 32137 - Mounts to the rear fender support brackets. Moves the antenna down low and out of the way of the detachable luggage rack or the tour pack on radio-equipped baggers. Complete with all hardware and a corrosion-proof polished stainless steel bracket. Will not fit on models with saddlebag fillers. Made in the U.S.A... 32137 1 on hand
$40.99J&M Corporation CB/Radio Trunk-Mount Antenna p407724
Manufacturer: J&M Corporation
Dennis Kirk Part #: 407724
J&M Corporation CB/Radio Trunk-Mount Antenna : Manufacturer part # p407724 - OEM replacement staffs have been designed specifically for the Harley CB radio cable/load system (pre-tuned for the CB, NO-SWR adjustment necessary) and the Harley AM/FM portion of the audio system (same antenna) for the tail-trunk mounting position only. Easy installation; just over 1' in length. Sold each.. p407724 More than 10 on hand
$67.99J&M Corporation CB Hand Microphone Kit HMHU98
Manufacturer: J&M Corporation
Dennis Kirk Part #: 406822
J&M Corporation CB Hand Microphone Kit: Manufacturer part # HMHU98 - Enables the rider to talk on the CB when the helmet is left behind. Does not interfere with headset operation. No wire cutting or splicing required for installation. Made in the U.S.A... HMHU98 1 on hand
$89.95Drag Specialties CB Antenna Kit 21300006
Manufacturer: Drag Specialties
Dennis Kirk Part #: 201358
Drag Specialties CB Antenna Kit: Manufacturer part # 21300006 - Kit includes 44 in. L antenna, mounting bracket and all necessary hardware.. 21300006 1 on hand
$120.99Show Chrome C.B. Antenna Kit 52-657
Manufacturer: Show Chrome
Dennis Kirk Part #: 407231
Show Chrome C.B. Antenna Kit: Manufacturer part # 52-657 - Mounts to trunk; hardware included. INCLUDED ITEMS: One antenna base. One lower antenna. One upper antenna. One grounding plate. Two 6mm x 23mm flange head bolts. One 4mm allen wrench. One 2mm allen wrench. One instruction sheet.. 52-657 7 on hand
CLEARANCE!
Was: $14.95
Now: $11.21
One Industries Factory Bar Pads BP-CB-HOFAC2
Manufacturer: One Industries
Dennis Kirk Part #: 595394
One Industries Factory Bar Pads: Manufacturer part # BP-CB-HOFAC2 - Durable, back-printed vinyl over high-density foam with hook-and-loop closure. Sold each.. BP-CB-HOFAC2 1 on hand
$51.99Novello Handlebar Wire Extension Kit for CB Radio DNWHRC15
Manufacturer: Novello
Dennis Kirk Part #: 212821
Novello Handlebar Wire Extension Kit for CB Radio: Manufacturer part # DNWHRC15 - 12 wire. No cutting, soldering or hassle. Kits include color-coded wire, OEM pin connectors, 1/8 in. and 3/8 in. shrink tubing, complete instructions, illustration and wire block diagram. Can be internally wired through handlebars. , , NOTE: For 1996-2006 Harley-Davidson with a CB radio, , Must also order standard kit: 211742 without cruise, 211746 with cruise. DNWHRC15 1 on hand
$50.99Novello Handlebar Wire Extension Kit for CB Radio p212826
Manufacturer: Novello
Dennis Kirk Part #: 212829
Novello Handlebar Wire Extension Kit for CB Radio: Manufacturer part # p212826 - 12 wire. No cutting, soldering or hassle. Kits include color-coded wire, OEM pin connectors, 1/8 in. and 3/8 in. shrink tubing, complete instructions, illustration and wire block diagram. Can be internally wired through handlebars. , , NOTE: For 2007-2008 Harley-Davidson with a CB radio, , Must also order standard kit: 212833 without cruise, 212837 with cruise. p212826 1 on hand
$524.99Joker Machine Chopper Ceramic Black Pipes EX-04-CB
Manufacturer: Joker Machine
Dennis Kirk Part #: 449263
Joker Machine Chopper Ceramic Black Pipes: Manufacturer part # EX-04-CB - Designed for performance, styled to match Joker Machine's billet accessories. Includes power cones already built into each pipe for top performance. Unique reverse slash cut ends and Joker Machine's diamond logo along the outer pipe for an "Old School" look. Hand-crafted 3-step exhaust design will surely enhance the looks and performance of any Softail. Feature Joker's exclusive support bracket system. For optional chrome heat shields use 4401096. , , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, overheating, etc., and is not caused by defective manufacturing. See the Chems/Lubes section for products to help remove and prevent blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. EX-04-CB Expected Soon
$40.99J&M Corporation CB/Radio Rail-Mount Antenna p407724
Manufacturer: J&M Corporation
Dennis Kirk Part #: 407725
J&M Corporation CB/Radio Rail-Mount Antenna : Manufacturer part # p407724 - OEM replacement staffs have been designed specifically for the Harley CB radio cable/load system (pre-tuned for the CB, NO-SWR adjustment necessary) and the Harley AM/FM portion of the audio system (same antenna) for the tail-trunk mounting position only. Easy installation; just over 1' in length. Sold each.. p407724 5 on hand
$44.99Novello Handlebar Wire Extension Kit for CB Radio DNWHRC8
Manufacturer: Novello
Dennis Kirk Part #: 212819
Novello Handlebar Wire Extension Kit for CB Radio: Manufacturer part # DNWHRC8 - 12 wire. No cutting, soldering or hassle. Kits include color-coded wire, OEM pin connectors, 1/8 in. and 3/8 in. shrink tubing, complete instructions, illustration and wire block diagram. Can be internally wired through handlebars. , , NOTE: For 1996-2006 Harley-Davidson with a CB radio, , Must also order standard kit: 211740 without cruise, 211744 with cruise. DNWHRC8 1 on hand
