$6.75Novus Polish 2 NOVUS NO 2
Manufacturer: Novus
Dennis Kirk Part #: 3186
Novus Polish 2: Manufacturer part # NOVUS NO 2 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 - (301300) takes out heavy scratches in Lucite® and Plexiglass® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 2 More than 10 on hand
$52.99Stud Boy Deuce Wear Bar - 4 1/2 in. CAT-D2093-45
Manufacturer: Stud Boy
Dennis Kirk Part #: 031903
Stud Boy Deuce Wear Bar - 4 1/2 in.: Manufacturer part # CAT-D2093-45 - New dual-runner design uses the concave side design of our original Shaper Bars. Lightweight, one-piece design. No darting on the trails; runner makes its own groove and turns like a performance runner. No top-end loss; design eliminates dual runner drag. Design is self-cleaning so it won't clog with snow, ice or rocks or snag obstacles. Extremely durable. 4 1/2" of 60° cutting carbide. Sold each; order two for a complete set. CAT-D2093-45 3 on hand
$199.99Carlini One-Piece Risers for 1 1/2 in. Hoghandles HHR-2
Manufacturer: Carlini
Dennis Kirk Part #: H59919
Carlini One-Piece Risers for 1 1/2 in. Hoghandles: Manufacturer part # HHR-2 - For Hoghandle Bars, Part No. H59913 and H59914. HHR-2 1 on hand
$113.99HMK 2008 Cruiser 2 Boots Cruiser 2
Manufacturer: HMK
Dennis Kirk Part #: 341111610
HMK 2008 Cruiser 2 Boots: Manufacturer part # Cruiser 2 - Rated to -40 degrees C/-40 degrees F . Boot height is 10 in. with all the features of the original Cruiser 2 and the addition of an improved lacing system. At home on the trail, in the shop or around the cabin; put them on in the morning and stay comfortable all day long. All-weather, water-resistant TPU construction with synthetic leather and textile shell. Forgiving flex with confidence-building support. Dual-zone lacing for maximum comfort and adjustability. Easy-grab nylon webbing heel pull. 400-gram Thinsulate insulation. Removable molded EVA footbed. Sure-grip tread with varied sole pattern for all-around traction. Water resistant but not waterproof.. Cruiser 2 5 on hand
CLEARANCE!
Was: $103.99
Now: $77.99
HMK Cruiser 2 Boots Cruiser 2
Manufacturer: HMK
Dennis Kirk Part #: 340927710
HMK Cruiser 2 Boots: Manufacturer part # Cruiser 2 - Constructed with synthetic leather and a textile shell for all-weather purpose to keep your feet warm all day long. Designed with one-piece for hassle-free utilization. Created for maximum comfort, adjustibility and durability with dual-zone lacing, forgiving flex and reinforced waterproof rubber. 400-gram DuPont Thermolite insulation. Comfort rated to -40°C/-40°F. Removable molded EVA footbed with Hydrophilic Fur. Receive all-around traction with the Sure-grip tread with varied sole patternWater resistant but not waterproof. , , Dimensions: Heel height: 2". Overall height: 9 1/2". Upper height: 7 1/2".. Cruiser 2 1 on hand
$113.99HMK Cruiser 2 Boots Cruiser 2 340927810
Manufacturer: HMK
Dennis Kirk Part #: 340927810
HMK Cruiser 2 Boots: Manufacturer part # Cruiser 2 - DennisKirk Part # 340927810 - Constructed with synthetic leather and a textile shell for all-weather purpose to keep your feet warm all day long. Designed with one-piece for hassle-free utilization. Created for maximum comfort, adjustibility and durability with dual-zone lacing, forgiving flex and reinforced waterproof rubber. 400-gram DuPont Thermolite insulation. Comfort rated to -40°C/-40°F. Molded EVA footbed with Hydrophilic Fur. Receive all-around traction with the Sure-grip tread with varied sole pattern. Water resistant but not waterproof. , , Dimensions: Heel height: 2". Overall height: 9". Upper height: 7".. Cruiser 2 3 on hand
$179.99Hot Cams Stage 2 Hot Cam 1077-2
Manufacturer: Hot Cams
Dennis Kirk Part #: 149993
Hot Cams Stage 2 Hot Cam: Manufacturer part # 1077-2 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Good top-end and over rev. Uses stock valve springs and auto-decompression mechanism. , Specs: , Intake Lift: 10.1mm, Intake Duration (@1mm): 248 Degrees, Exhaust Lift: 8.7mm, Exhaust Duration (@ 1mm): 268.5 Degrees. 1077-2 5 on hand
$179.99Hot Cams Stage 2 Hot Cam 1080-2
Manufacturer: Hot Cams
Dennis Kirk Part #: 149996
Hot Cams Stage 2 Hot Cam: Manufacturer part # 1080-2 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Uses stock valve springs and auto-decompression mechanism.. 1080-2 1 on hand
$179.99Hot Cams Stage 2 Hot Cam 4065-2
Manufacturer: Hot Cams
Dennis Kirk Part #: 149991
Hot Cams Stage 2 Hot Cam: Manufacturer part # 4065-2 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Excellent top-end and great over rev. Uses stock valve springs and auto-decompression mechanism.. 4065-2 1 on hand
$52.99Stud Boy Deuce Wear Bar - 4 1/2 in. CAT-D2264-45
Manufacturer: Stud Boy
Dennis Kirk Part #: 031904
Stud Boy Deuce Wear Bar - 4 1/2 in.: Manufacturer part # CAT-D2264-45 - New dual-runner design uses the concave side design of our original Shaper Bars. Lightweight, one-piece design. No darting on the trails; runner makes its own groove and turns like a performance runner. No top-end loss; design eliminates dual runner drag. Design is self-cleaning so it won't clog with snow, ice or rocks or snag obstacles. Extremely durable. 4 1/2" of 60° cutting carbide. Sold each; order two for a complete set. CAT-D2264-45 2 on hand
CLEARANCE!
Was: $759.99
Now: $531.99
D&D 2-into-1 Fat Cat Pipes 5495028
Manufacturer: D&D
Dennis Kirk Part #: 251465
D&D 2-into-1 Fat Cat Pipes: Manufacturer part # 5495028 - These are D&D's best performing pipes and the winner of Cycle World Magazines 2002 Power and Performance exhaust shootout. Just bolt them on and see gains of as much as 25 percent more horsepower and 15 percent more torque than stock. 2-into-1 design with stepped head pipes for maximum performance. 3/4 wrap heat shields to maintain appearance, and back-cut ends. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 5495028 1 on hand
