Buell S1

$45.99 Michelin S1 Scooter Front or Rear Tire S1
Manufacturer: Michelin
Dennis Kirk Part #: 543284
Michelin S1 Scooter Front or Rear Tire: Manufacturer part # S1 - J-rated for speeds up to 62 mph. Tested and proven where scooters rule -- in Europe. The most durable tires to provide excellent wear life -- all feature reinforced crowns with additional casing material on top of two carcass plies. S1's high-performance directional tread pattern provides ideal durability and handling with contemporary styling. Sidewall ID Information: Michelin 130/70-10 M/C 62J S1. , Dimensions:, Inflated Width/Measuring Rim Width: Not Available, Inflated Diameter: Not Available, Acceptable Rim Width(s): Not Available, Deepest Tread Depth: 6/32 in., Balance Dot: None, Directional Arrow: Yes, Speed Rating: J-Rated up to 62 MPH, , Capacities and Construction , Load Capacity/Inflation Pressure: 584 Lbs/36 PSI, Load Range: A, Bias or Radial Ply: Bias, Tread Plies/Material: 2 Polyester, Sidewall Plies/Material: 2 Polyester, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless-Use tubewith tube-type rim. S1
1 on hand

More Info/Options for Michelin S1 Scooter Front or Rear Tire S1

Buell S1

$204.99 EBC Custom Application/Oversize Floating Rotor for Buell Models Only MD719RS
Manufacturer: EBC
Dennis Kirk Part #: 195277
EBC Custom Application/Oversize Floating Rotor for Buell Models Only: Manufacturer part # MD719RS - Provide better braking and improved brake alignment. No rotor distortion - reduced chance of rotor cracking. Features polished chrome carriers. Oversized 13in. rotor. Sold each.. MD719RS
3 on hand

More Info/Options for EBC Custom Application/Oversize Floating Rotor for Buell Models Only MD719RS

Buell S1

$101.99 Flanders Chrome 7/8 in. Handlebar - Buell 65004501
Manufacturer: Flanders
Dennis Kirk Part #: 594169
Flanders Chrome 7/8 in. Handlebar - Buell: Manufacturer part # 65004501 - Quality and style from one of the top names in handlebars. Flanders has 50 years experience making superb handlebars. Made of seamless, cold-drawn steel tubing. Bars are knurled, but are not drilled or dimpled and are available in chrome or black Part No. 594170. Made in the U.S.A... 65004501
1 on hand

More Info/Options for Flanders Chrome 7/8 in. Handlebar - Buell 65004501

Buell S1

$93.99 Cometic Top End Gasket Set for Buell C9856
Manufacturer: Cometic
Dennis Kirk Part #: 263484
Cometic Top End Gasket Set for Buell: Manufacturer part # C9856 - High-quality gaskets ensure long-term reliability. Gasket sets feature Extreme Sealing Technology (EST) including embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material. Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots which could lead to gasket failure. Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base up. , , NOTE: For XB9 Firebolt 03-06 with standard bore.. C9856
1 on hand

More Info/Options for Cometic Top End Gasket Set for Buell C9856

Buell S1

$101.99 Flanders Black 7/8 in. Handlebar - Buell 65004502
Manufacturer: Flanders
Dennis Kirk Part #: 594170
Flanders Black 7/8 in. Handlebar - Buell: Manufacturer part # 65004502 - Quality and style from one of the top names in handlebars. Flanders has 50 years experience making superb handlebars. Made of seamless, cold-drawn steel tubing. Bars are knurled, but are not drilled or dimpled and also available in chrome Part No. 594169. Made in the U.S.A... 65004502
1 on hand

More Info/Options for Flanders Black 7/8 in. Handlebar - Buell 65004502

Buell S1

$47.99 SBS Sintered Metal (S1) Brake Pads p1903096
Manufacturer: SBS
Dennis Kirk Part #: 199386
SBS Sintered Metal (S1) Brake Pads: Manufacturer part # p1903096 - Sintered metal race pads that have been track tested by SBS-sponsored teams. Outstanding performance in all conditions - even at temperature levels over 300 degrees C. Pads are dynamometer-tested to produce the best quality sintered race pads available. Can be used with todays high-performance rotors. , , NOTE: NEVER USE SINTERED BRAKE PADS IN BIKES ORIGINALLY EQUIPPED WITH NON-SINTERED BRAKE PADS. Check your owners manual to see if sintered metal brakes were OEM equipment on your machine, , NOTE: All brake pads and shoes are sold in a set for one disc or drum. You must order one set for each disc or drum on your machine.. p1903096
1 on hand

More Info/Options for SBS Sintered Metal (S1) Brake Pads p1903096

Buell S1

Buell S1