$47.99Custom Chrome Universal Fat Bob Gas Tank Quickmount Kit 25048
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18100
Custom Chrome Universal Fat Bob Gas Tank Quickmount Kit: Manufacturer part # 25048 - A precise, effortless way to mount OEM or aftermarket Fat Bob tanks to any frames that have had the gas tank brackets removed. Lets you temporarily attach bracket for a quick visual check of tank placement. With final position selected, weld entire bracket assembly in place for a stronger-than-stock system of support. Bolts not included. For round-tube frames.. 25048 Expected Soon
$237.99Custom Chrome Fat Bob Gas Tank 25551
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18026
Custom Chrome Fat Bob Gas Tank: Manufacturer part # 25551 - Today, Custom Chrome is the worlds largest independent supplier of aftermarket parts and accessories Classic Fat Bob look for all FXR 92-94 models (except Dyna Glide). 4.0 gallon capacity. Looks like split tanks, but is actually a one-piece welded assembly with late-style twin screw top filler necks and 13/16 in. external-thread gas valve fittings. Bolts directly to the stock mounts and accepts all FL-style dash assemblies (except Cat Eye) when the appropriate dash base is used. Included with each tank is a super-flex speedo cable and chrome tank divider panel. Equipped with internal emission control system connections for use on vehicles with fuel tank emission devices (i.e. California models). Unpainted steel . , NOTE: , H18026 tank requires removal of solder from vent tube prior to installation when connecting fuel tank emission control device., , NOTE: , Speedo-cable supplied with tank will not fit our Drag Specialties 4 5/8 in 2-1 speedometers. If using the Drag Specialties speedometers a cable with a 12 mm nut must be pruchased separately from our front wheel speedometer cable chart., , NOTE: Tank does not include dash, speedometer, or gas caps, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 25551 5 on hand
$158.99Kustomwerks Flat Side Fat Bob Gas Tank without Gas Cap 20068
Manufacturer: Kustomwerks
Dennis Kirk Part #: 183626
Kustomwerks Flat Side Fat Bob Gas Tank without Gas Cap: Manufacturer part # 20068 - A perfect reproduction of the late style flat side Fat Bob tank. Can be used for custom applications or crash repair. Fits FXST models 1984 to 1999. Takes dual screw in style gas caps - not included. Tank has a capacity of 5 gallons , , NOTE: Replaces OEM numbers 61211-84A & 61228-84A, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 20068 3 on hand
$139.99Kustomwerks Fat Bob Gas Tank 20004
Manufacturer: Kustomwerks
Dennis Kirk Part #: 183624
Kustomwerks Fat Bob Gas Tank: Manufacturer part # 20004 - Fits 4 Speed Big Twin Frames to 1984 except Softail. Takes dual screw in type gas caps - not included. Tank has a capacity of 5 gallons, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 20004 3 on hand
$182.95Drag Specialties Fat Bob Style Gas Tank 011275BX36
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18249
Drag Specialties Fat Bob Style Gas Tank: Manufacturer part # 011275BX36 - For use with early style twist lock gas caps. Your choice of 3 1/2- or 5-gallon Fat Bob-style tanks for use on stock Harley and custom frames to 84. Accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks. Unpainted steel finish, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011275BX36 1 on hand
$199.95Drag Specialties Fat Bob Style Gas Tank 011276BX36
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18283
Drag Specialties Fat Bob Style Gas Tank: Manufacturer part # 011276BX36 - For use with early style twist lock gas caps. Your choice of 3 1/2-, or 5-gallon Fat Bob-style tanks for use on stock Harley and custom frames to 84. Accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks. Unpainted steel finish, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. , , Included Items:. , 1. (1) Two piece gas tank. , 2. (1) 5/16"-24 x 2 3/4" shoulder bolt. , 3. (3) 5/16"-24 x 1" hex head bolts. , 4. (11) 5/16" flat washers. , 5. (4) 5/16" lock washers. , 6. (2) 5/16" x 1/4" spacers. , 7. (2) 5/16" nuts. , 8. (8) oval washers with one 5/16" hole on each end. 011276BX36 1 on hand
$215.95Drag Specialties Fat Bob Style Gas Tank 011447BX36
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18247
Drag Specialties Fat Bob Style Gas Tank: Manufacturer part # 011447BX36 - For use with 82-E96 screw-in gas caps. 5-gallon Fat Bob-style tanks for use on stock Harley and custom frames to 84. Accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks. Unpainted steel finish. Replaces OEM number 61213-83, 61229-83, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011447BX36 2 on hand
$3.99Kuryakyn Key for Fat Bob and XL Flush Mount Gas Cap 8311
Manufacturer: Kuryakyn
Dennis Kirk Part #: H18862
Kuryakyn Key for Fat Bob and XL Flush Mount Gas Cap: Manufacturer part # 8311 - Replacement key for flush mount gas caps: H18860 and H18861.. 8311 5 on hand
$62.99Badlands Fat Bob Style Gas Tank Conversion Mounts TMK01
Manufacturer: Badlands
Dennis Kirk Part #: H18098
Badlands Fat Bob Style Gas Tank Conversion Mounts: Manufacturer part # TMK01 - Complete tank mount kit adapts new rubber-mounted flatside fuel tanks to 84 and earlier solid tank mounted frames. Rear mount requires welding. All mounting hardware, grommets and instructions are included. Mounts fit frames from 58-84. Made in the U.S.A... TMK01 1 on hand
$170.99Custom Chrome Fat Bob Extra Capacity Gas Tank 15294
Manufacturer: Custom Chrome
Dennis Kirk Part #: H181029
Custom Chrome Fat Bob Extra Capacity Gas Tank: Manufacturer part # 15294 - Fits FXST 84, all models with split tanks 85-99. Six-gallon tanks flatside fat bob gas tank. The classic Fat Bob profile, but a bit wider and taller than stock tanks. Unpainted steel. , , NOTE: Flexible steel, leather or plastic tank panels should be used to cover the gap between the tanks due to the slightly different shape, , NOTE: Does not include dash mounting spacer kit, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15294 7 on hand
$8.99Custom Chrome Plain Vented Gas Cap For Fat Bob Tanks 12725
Manufacturer: Custom Chrome
Dennis Kirk Part #: H181020
Custom Chrome Plain Vented Gas Cap For Fat Bob Tanks: Manufacturer part # 12725 - Available vented or unvented. Vented is for standard gas tanks and the right side of Fat Bob tanks. Unvented is for left side of Fat Bob tanks. Fit original equipment and replacement tanks with cam-style bungs. Replaces OEM number 61103-36.. 12725 4 on hand
$170.99Custom Chrome Fat Bob Standard Gas Tank 25549
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18027
Custom Chrome Fat Bob Standard Gas Tank: Manufacturer part # 25549 - Available in 3.5 and 5.0 gallon versions. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for years of trouble-free service. Both tanks accept the dash for Low Rider models or the large speedo dash for FXWG models. Pre-82 cam-lock style filler necks allow use of the widest range of gas cap designs. 22 mm external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Shipped in a divided box for protection. Unpainted steel. Replaces OEM numbers 61211-67 and 61228-67. , WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed before being painted to eliminate potential problems. 25549 2 on hand
