$114.99Kuryakyn Universal Small Red w/Blue Dot LED Silver Bullet Lights w/3/8 in. -16 Hollow Mounting Bolt 2359
Manufacturer: Kuryakyn
Dennis Kirk Part #: H21528
Kuryakyn Universal Small Red w/Blue Dot LED Silver Bullet Lights w/3/8 in. -16 Hollow Mounting Bolt: Manufacturer part # 2359 - The wiring exits the light through the mounting bolt. Universal Silver Bullets can be installed just about anywhere. They include minimal mounting hardware, but with a little ingenuity, they will fill the bill in applications we don't cover with complete kits. Our P-Clamps and new Fork Clamps work great to attach Silver Bullets to engine guards, frame tubes, or fork tubes. L.E.D. Silver BulletsThe CAD-designed lenses enhance the already bright L.E.D. output to provide exceptional, jewel-like illumination. If you choose to run them on the rear of your bike, you simply wire the bright circuit from the light into your stock turn signal circuit and they will function just as your stock turn signals did. Red L.E.D. Silver Bullets are single circuit and are intended for rear applications as turn signals only unless used with our Run-Turn-Brake Controller, P/N 211179 or H4-0028. If you intend to use the Rear Run-Turn-Brake controller with your rear mounted L.E.D. Silver Bullets, be sure to order the red version because it is illegal to have amber brake or running lights on the rear of a vehicle. , , Note:, The necessary Load Equalizer is included in each L.E.D. Silver Bullet kit. There is no need to purchase one separately, , Important Info on Silver Bullets:, Red L.E.D. Silver Bullets have two wires, power and ground, and are intended to be used only as turn signals unless used with 211179 or H40-028 for use on Softails 96-06, Dynas, Dressers and Road kIngs 97-06 and Sportsters 97-03. Run-Turn-Brake Controller. Amber L.E.D. Silver Bullets have three wires, low, bright and ground, so they can be wired to operate as running lights and turn signals., , Small Silver Bullets measure 2-1/2 in. x 1-5/8 in... , , Light Diameter 1 5/8". , Light Depth: 2 7/8". , Light Height: 2 1/4". , Replacement Bulb: Not available from Dennis Kirk. , Not DOT Approved. , , Included Items:. , 1. (2) Small red LED silver bullets with Blue Dot (light body tapped 3/8"-16, Wires Exit through hollow mounting bolt). , 2. (2) 3/8"/16 x 1 3/4" hollow hex bolts-chrome. , 3. (2) 3/8" I.D. Internal tooth star washers- Chrome. , 4. (2) Optional visorless bezels. , 5. (1) Anti-seize. , 6. (1) Load Equalizer which includes, (3) Red clip wire connectors. , (1) Installation instructions. 2359 2 on hand
$38.99Pro-One Teardrop Taillight w/ Blue Dot Lens 400769
Manufacturer: Pro-One
Dennis Kirk Part #: H21405
Pro-One Teardrop Taillight w/ Blue Dot Lens: Manufacturer part # 400769 - Cool teardrop design. Features flush mounting with choice of plain-H21401 or blue dot glass lens. Measures 2 5/16 in. W x 5 1/2 in. H x 3 1/2 in. D. Recessed teardrop bucket (H21352) available separately. Made in the U.S.A.. , , Replacement lens: Red lens (ea.) - part no. H21856 Blue dot lens (ea.) - part no. H21855, , Note: Blue dots are illegal in some states. Please check your local laws. 400769 1 on hand
$25.95Drag Specialties Red w/Blue Dot Laydown Taillight Lens with Top Tag Window 09020403
Manufacturer: Drag Specialties
Dennis Kirk Part #: H21218
Drag Specialties Red w/Blue Dot Laydown Taillight Lens with Top Tag Window: Manufacturer part # 09020403 - Give a clean, smooth custom look. Matches the rear angle of most OEM rear fenders and OEM saddlebags. Provide a unique look for FXST, XL, FLHT, FXD and FXR models. Compatible with most laydown license plate mounts. Top tag window or bottom tag window designs available.. 09020403 3 on hand
$25.95Drag Specialties Blue Dot Lens DS272048
Manufacturer: Drag Specialties
Dennis Kirk Part #: H21113
Drag Specialties Blue Dot Lens: Manufacturer part # DS272048 - For part number H21-101.. DS272048 3 on hand
$49.95Drag Specialties Laydown Taillight Assembly w/ Blue Dot DS272199
Manufacturer: Drag Specialties
Dennis Kirk Part #: H21101
Drag Specialties Laydown Taillight Assembly w/ Blue Dot: Manufacturer part # DS272199 - Kits for complete taillight assemblies contain adapter bracket, hardware and instructions; for installation on fenders of FLT/HT, FXD, XL 99-up plus FLST (except FLSTS) 00-up. Also bolts directly to fenders of most 73-98 models (adapter bracket not required). Adapter bracket-H27129 mounts most 73-98 style taillight assemblies to FLT/FLHT, FXD, XL 99-up and FLST 00-up. Not DOT approved. , NOTE: Modification of OEM wiring necessary for installation on 99-up models.. Replacement adapter bracket (H27-129) and replacement lens (H21-113) sold separately .. DS272199 2 on hand
$152.99Kuryakyn Panacea Taillight-Deluxe w/Blue Dot
4889
Manufacturer: Kuryakyn
Dennis Kirk Part #: 211160
Kuryakyn Panacea Taillight-Deluxe w/Blue Dot : Manufacturer part # 4889 - IMPORTANT INFORMATION ABOUT PANACEA TAILLIGHTS:, All wiring for trailer lights must be spliced into the wiring harness ahead of the Panacea control module. The Panacea Taillight System has set new standards in LED lighting for Harley-Davidson motorcycles. The Panacea allows your rear taillight and turn signals to work together as running lights, brake lights and turn signals. Simple plug-in installation makes the Panacea an extremely user-friendly upgrade to virtually all late-model Harleys. If you install both the taillight and turn signal inserts, you'll have over 300 individual LEDs working for you. Turn signal inserts and Taillight are sold separately:, Bullet "Deuce" style - 211155, Flat style - 211149. 4889 4 on hand
$6.99Chris Products Blue Dots 05304
Manufacturer: Chris Products
Dennis Kirk Part #: H21632
Chris Products Blue Dots: Manufacturer part # 05304 - Give your taillight or marker light some attitude. Makes a diamond-like appearance when lit. Features chromed edging. Mounts in the lens surface of light; lens not included. Sold in 4-pk.. , WARNING:Some states prohibit the use of blue lights on a motor vehicle. Check your states laws before ordering.. 05304 9 on hand
$5.99Chris Products Turn Signal Lens with Blue Dot-Amber DHD2AB
Manufacturer: Chris Products
Dennis Kirk Part #: 21003
Chris Products Turn Signal Lens with Blue Dot-Amber: Manufacturer part # DHD2AB - Need a turn signal lens?. For front or rear. Replaces OEM 68457-86. Made in the U.S.A.. Sold each. , NOTE: When a blue dot reflector is installed in a DOT approved lens, the lens no longer passes DOT standards. Check local laws before installing blue dot lenses.. DHD2AB 2 on hand
$5.99Chris Products Turn Signal Lens with Blue Dot-Amber DHD1AB
Manufacturer: Chris Products
Dennis Kirk Part #: 21001
Chris Products Turn Signal Lens with Blue Dot-Amber: Manufacturer part # DHD1AB - Need a turn signal lens?. For front or rear. Replaces OEM 68457-86. Made in the U.S.A.. Sold each. , NOTE: When a blue dot reflector is installed in a DOT approved lens, the lens no longer passes DOT standards. Check local laws before installing blue dot lenses.. DHD1AB 2 on hand
$5.99Chris Products Turn Signal Lens with Blue Dot-Red DHD2RB
Manufacturer: Chris Products
Dennis Kirk Part #: 21004
Chris Products Turn Signal Lens with Blue Dot-Red: Manufacturer part # DHD2RB - Need a turn signal lens?. For front or rear. Replaces OEM 68457-86. Made in the U.S.A.. Sold each. , NOTE: When a blue dot reflector is installed in a DOT approved lens, the lens no longer passes DOT standards. Check local laws before installing blue dot lenses.. DHD2RB 6 on hand
$5.99Chris Products Turn Signal Lens with Blue Dot-Amber DHD4AB
Manufacturer: Chris Products
Dennis Kirk Part #: 21007
Chris Products Turn Signal Lens with Blue Dot-Amber: Manufacturer part # DHD4AB - Need a turn signal lens?. For front or rear. Replaces OEM 68440-86. Made in the U.S.A.. Sold each. , NOTE: When a blue dot reflector is installed in a DOT approved lens, the lens no longer passes DOT standards. Check local laws before installing blue dot lenses.. DHD4AB 3 on hand
$5.99Chris Products Turn Signal Lens with Blue Dot-Red DHD4RB
Manufacturer: Chris Products
Dennis Kirk Part #: 21008
Chris Products Turn Signal Lens with Blue Dot-Red: Manufacturer part # DHD4RB - Need a turn signal lens?. For front or rear. Replaces OEM 68440-86. Made in the U.S.A.. Sold each. , NOTE: When a blue dot reflector is installed in a DOT approved lens, the lens no longer passes DOT standards. Check local laws before installing blue dot lenses.. DHD4RB 5 on hand
