$284.99Arlen Ness Big Shot Adjustable Fuel Injection Tuner 18-604
Manufacturer: Arlen Ness
Dennis Kirk Part #: 202035
Arlen Ness Big Shot Adjustable Fuel Injection Tuner: Manufacturer part # 18-604 - This new load-based fuel-injection module does not require splicing or modifications to your motorcycle during installation. Superior in design over fuel-injection modules that work off throttle position. Pre-loaded with base maps for different models which can then be fine tuned to your riding style and bike. Laptops and dyno machines not required. Uses the latest load-based technology in fuel-injection performance. Detects the exact amount of load on the engine at any RPM and any road speed; delivers the perfect amount of fuel to the engine for optimum performance, , NOTE: Not legal for operation on public highways in California.. 18-604 1 on hand
$526.99Vance & Hines Big Shots Staggered Exhaust System 18417
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4400201
Vance & Hines Big Shots Staggered Exhaust System: Manufacturer part # 18417 - Features 2 1/2 in.-Dia., full-length, full-coverage heat shields with stylish billet slash-cut ends. Contains a Power Chamber, a unique crossover system that gives your bike the performance of a race-inspired 2-into-1 but keeps the intimidating look of a classic drag 2-into-2 design. Exhaust note is a true hot rod sound. Removable baffles. Includes all mounting hardware and instructions, , NOTE: , Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18417 5 on hand
$501.99Vance & Hines Big Shots 18411
Manufacturer: Vance & Hines
Dennis Kirk Part #: 449001
Vance & Hines Big Shots: Manufacturer part # 18411 - Dramatically increase horsepower and torque. Supplled with the Vance and Hines Power Chamber, a unique crossover system that offers all the performance advantages of a 2-into-1 race system. Mammoth 2 1/2 in. full-coverage heat shields. Removable baffles and racy billet end tips. Virtually blue-proof. For maximum performance, a Vance and Hines Power Commander is recommended, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18411 3 on hand
$79.99Memphis Shades Big Shot Windshield w/7 in. Cutout MEP5711
Manufacturer: Memphis Shades
Dennis Kirk Part #: 231031
Memphis Shades Big Shot Windshield w/7 in. Cutout: Manufacturer part # MEP5711 - Large and in charge. You will not find a bigger Sportshield anywhere. Maximum coverage - measures 21 in. W x 20 in. H above headlight. ICI Lucite® construction for great clarity and scratch- and weather-resistance. Features a Quick Change Design mounting system, change or remove your windshield in just over a minute. Order Quick Change design mounting kit separately. Order Plate Only Kit to quick-change with already mounted Memphis Fats/Slims. , NOTE: Order Quick Change mounting kit separately. Order Plate Only Kit to quick-change with already mounted Fats/Slims. These are found in Windshield Mounting Hardware and Accessories category by Make, Model and Year. MEP5711 3 on hand
$372.99Vance & Hines Big Shots Exhaust System 17903
Manufacturer: Vance & Hines
Dennis Kirk Part #: H25304
Vance & Hines Big Shots Exhaust System: Manufacturer part # 17903 - Large 2 1/2 in. diameter pipes, front to back, are big on power and big on a sound that is all their own. Full-coverage heat shields are essentially Blue-Proof for big long-lasting style. As with every Vance & Hines system these feature a superior fit and an unrivaled finish. At the business end of every Big Shot system are meticulously finished billet end caps. Instructions, all mounting hardware and removable baffles are included. Made in the U.S.A.. Will not fit models with kickstart. , , NOTE: Fits with floorboards., , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing. For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 17903 1 on hand
$498.99Vance & Hines Big Shots Staggered Exhaust System 17919
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4400316
Vance & Hines Big Shots Staggered Exhaust System: Manufacturer part # 17919 - Feature the Power Chamber design, a revolutionary crossover system that beefs up the horsepower. 2 1/2 in. heat shields are blue-proof for long-lasting style. Perfect fit and unrivalled finish. At the business end of the Big Shots Long System are meticulously finished billet slash cut end caps. Instructions, all mounting hardware and removable baffles are included. Include mounts for factory O2 sensorsMade in the U.S.A.. For replacement Slash Billet End Caps order DK part no. H43199; for optional Quiet Baffle order DK Part no. 431326, for straight billet end caps order H43-037. , , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: Will not fit models with kick start . , , NOTE: There is no warranty on exhaust pipes and mufflers with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See our Chems/Lubes section to help prevent or remove blueing. Included Items: (1) Nylon cable tie, (3) #28 Hose clamps, (3) #20 Hose clamps, (4) 5/16 in. x 5/8 in. Flange head bolts, (1) 1 1/16 in. x 9/16 in. Spacer, (2) Nutplates, (3) 5/16 in. x 1 1/2 in. Hex head bolts, (3) 5/16 in. Flat washers, (1) Bracket, (1) Header assembly, (1) Front heat shield, (1) Rear heat shield. 17919 6 on hand
$568.99Vance & Hines Long Big Shot Exhaust System 17923
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4401507
Vance & Hines Long Big Shot Exhaust System: Manufacturer part # 17923 - Feature the Power Chamber design, a revolutionary crossover system that beefs up the horsepower. 2 1/2 in. heat shields are blue-proof for long-lasting style. Perfect fit and unrivalled finish. At the business end of the Big Shots Long System are meticulously finished billet straight cut end caps. Instructions, all mounting hardware and removable baffles are included. Include mounts for factory 02 sensors. Made in the U.S.A.. For replacement Straight Billet End Caps order DK part no. H43037; for optional Quiet Baffle order DK Part no. 431326 , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: Will not fit models with kick start. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 17923 7 on hand
$688.99Vance & Hines Big Shot Duals 47925
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402643
Vance & Hines Big Shot Duals: Manufacturer part # 47925 - The complete package for late-model touring machines. Comes complete with 220 deg.wrap and 2 1/2 in. heat shields with blue-proof technology. 1 3/4 in. headpipes that flow into 2 1/8 in. muffler bodies are protected with heat shields. A clean and classic dresser look for both sides of your ride is supplied by a true 2-into-2 system that eliminates factory crossover. Create a classic Vance & Hines note with specially tuned baffles. Superior fit and an unrivalled finish when compared to other systems. Meticulously finished with straight-cut billet end caps. Optional distinctive Fishtaill II end caps or billet slash-cut end caps are available. Removable baffles and all mounting hardware included. Made in the U.S.A.. , , There is no warranty on exhaust with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, overheating, etc., and is not cause by defective manufacturing. See Lubes/Chems section for products that help prevent or remove blueing. , , Included items:. , 1. (2) Mounting Bracket. , 2. (1) Left hand mounting bracket. , 3. (1) Right hand mounting bracket. , 4. (1) Front header. , 5. (1) Rear header. , 6. (1) Front heat shield. , 7. (1) Rear heat shield. 47925 4 on hand
$79.99Memphis Shades Big Shot Windshield w/9 in. Cutout MEP5721
Manufacturer: Memphis Shades
Dennis Kirk Part #: 231052
Memphis Shades Big Shot Windshield w/9 in. Cutout: Manufacturer part # MEP5721 - Large and in charge. You will not find a bigger Sportshield anywhere. Maximum coverage - measures 21 in. W x 20 in. H above headlight. ICI Lucite® construction for great clarity and scratch- and weather-resistance. Features a Quick Change Design mounting system, change or remove your windshield in just over a minute. Order Quick Change design mounting kit separately. Order Plate Only Kit to quick-change with already mounted Memphis Fats/Slims. , NOTE: Order Quick Change mounting kit separately. Order Plate Only Kit to quick-change with already mounted Fats/Slims. These are found in Windshield Mounting Hardware and Accessories category by Make, Model and Year. MEP5721 4 on hand
$284.99Arlen Ness Big Shot Adjustable Fuel Injection Tuner 18-609
Manufacturer: Arlen Ness
Dennis Kirk Part #: 202448
Arlen Ness Big Shot Adjustable Fuel Injection Tuner: Manufacturer part # 18-609 - This new load-based fuel-injection module does not require splicing or modifications to your motorcycle during installation. Superior in design over fuel-injection modules that work off throttle position. Pre-loaded with base maps for different models which can then be fine tuned to your riding style and bike. Laptops and dyno machines not required. Uses the latest load-based technology in fuel-injection performance. Detects the exact amount of load on the engine at any RPM and any road speed; delivers the perfect amount of fuel to the engine for optimum performance, , NOTE: Not legal for operation on public highways in California.. 18-609 1 on hand
$236.99Arlen Ness Big Shot Adjustable Fuel Injection Tuner 18-600
Manufacturer: Arlen Ness
Dennis Kirk Part #: 202033
Arlen Ness Big Shot Adjustable Fuel Injection Tuner: Manufacturer part # 18-600 - This new load-based fuel-injection module does not require splicing or modifications to your motorcycle during installation. Superior in design over fuel-injection modules that work off throttle position. Pre-loaded with base maps for different models which can then be fine tuned to your riding style and bike. Laptops and dyno machines not required. Uses the latest load-based technology in fuel-injection performance. Detects the exact amount of load on the engine at any RPM and any road speed; delivers the perfect amount of fuel to the engine for optimum performance, , NOTE: Not legal for operation on public highways in Califonia.. 18-600 1 on hand
$236.99Arlen Ness Big Shot Adjustable Fuel Injection Tuner 18-606
Manufacturer: Arlen Ness
Dennis Kirk Part #: 202036
Arlen Ness Big Shot Adjustable Fuel Injection Tuner: Manufacturer part # 18-606 - This new load-based fuel-injection module does not require splicing or modifications to your motorcycle during installation. Superior in design over fuel-injection modules that work off throttle position. Pre-loaded with base maps for different models which can then be fine tuned to your riding style and bike. Laptops and dyno machines not required. Uses the latest load-based technology in fuel-injection performance. Detects the exact amount of load on the engine at any RPM and any road speed; delivers the perfect amount of fuel to the engine for optimum performance, , NOTE: Not legal for operation on public highways in California.. 18-606 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
