|
|
CLOSEOUT!
Was: $474.99
Now: $356.24
Samson Big Guns 3 Rip Saw Exhaust System 440049
Dennis Kirk Part #: 440049
Samson Big Guns 3 Rip Saw Exhaust System 440049: Manufacturer part # S-874 - Samson Exhaust revolutionizes motorcycle exhaust with this 3rd generation of the famous Big Gun line. Stepped pipes go from 1 3/4 in. to 2 1/4 in. to improve flow of spent exhaust gases. Seamless, permanent, 2 1/2 in., 220 deg. one-piece heat shields prevent discoloration; more reliable than fastener-type heat shields. Integrated, smooth-flow baffles ensure tuning requirements of today's motors while emitting a deep rumble. Made in the U.S.A.. NOTES: , There is no warranty on exhaust pipes with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product section for products that will prevent or remove blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. S-874
1 on Hand
More Info/Options for Samson Big Guns 3 Rip Saw Exhaust System 440049
|
|
|
|
CLOSEOUT!
Was: $474.99
Now: $356.24
Samson Big Guns 3 Big Swoopies Exhaust System 4401413
Dennis Kirk Part #: 4401413
Samson Big Guns 3 Big Swoopies Exhaust System 4401413: Manufacturer part # S-860 - Timeless good looks and superb sound that Samson is known for. Seamless, permanent 2 1/2", 220 one-piece heat shields prevent discoloration; more reliable than fastener-type heat shields. Integrated, smooth-flow baffles ensure tuning requirements of today's fuel-injected motors while emitting a deep rumble. Stepped pipes go from 1 3/4" to 2 1/4" to improve flow of spent exhaust gases. Made in the U.S.A., , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. S-860
2 on Hand
More Info/Options for Samson Big Guns 3 Big Swoopies Exhaust System 4401413
|
|
|
|
CLOSEOUT!
Was: $360.99
Now: $270.74
H44731 Samson Big Guns/Dragsta Exhaust System
Dennis Kirk Part #: H44731
H44731 Samson Big Guns/Dragsta Exhaust System: Manufacturer part # S-178 - Blow the oppostition away. Get the sound, style and quality of Samson. Designed for use on high-performance engines. 1 3/4 in. header pipes flow into larger 2 1/4 in. diameter bodies. Mounts to stock bracket. Made in the USA. NOTE: Fits with floorboard. Order Part No. 43-1207 or 43-1208 baffles for this exhaust. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. S-178
1 on Hand
More Info/Options for H44731 Samson Big Guns/Dragsta Exhaust System
|
|
|
|
CLOSEOUT!
Was: $370.99
Now: $278.24
H44323 Samson Big Guns/Short Slashers Exhaust System
Dennis Kirk Part #: H44323
H44323 Samson Big Guns/Short Slashers Exhaust System: Manufacturer part # D-159 - Blow the oppostition away. Get the sound, style and quality of Samson. Designed for use on high-performance engines. 1 3/4 in. header pipes flow into larger 2 1/4 in. diameter bodies. Mounts to stock bracket. Made in the USA. , , Included Items:. , 1. (1) Chrome transmission bracket. , 2. (2) 5/16" x 3/4" carriage bolts. , 3. (2) 5/16" flat washers. NOTE: Cannot use baffles with this exhaust, , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. D-159
2 on Hand
More Info/Options for H44323 Samson Big Guns/Short Slashers Exhaust System
|
|
|
|
CLOSEOUT!
Was: $474.99
Now: $356.24
Samson Big Guns 3 Chopper Longtails Exhaust System 4401408
Dennis Kirk Part #: 4401408
Samson Big Guns 3 Chopper Longtails Exhaust System 4401408: Manufacturer part # S-810 - Timeless good looks and superb sound that Samson is known for. Seamless, permanent 2 1/2", 220 one-piece heat shields prevent discoloration; more reliable than fastener-type heat shields. Integrated, smooth-flow baffles ensure tuning requirements of today's fuel-injected motors while emitting a deep rumble. Stepped pipes go from 1 3/4" to 2 1/4" to improve flow of spent exhaust gases. Made in the U.S.A., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. S-810
1 on Hand
More Info/Options for Samson Big Guns 3 Chopper Longtails Exhaust System 4401408
|
|
|
|
CLOSEOUT!
Was: $474.99
Now: $356.24
Samson Big Guns 3 Cannon Exhaust System 4400207
Dennis Kirk Part #: 4400207
Samson Big Guns 3 Cannon Exhaust System 4400207: Manufacturer part # D-801 - Samson Exhaust revolutionizes motorcycle exhaust with this 3rd generation of the famous Big Gun line. Stepped pipes go from 1 3/4 in. to 2 1/4 in. to improve flow of spent exhaust gases. Seamless, permanent, 2 1/2 in., 220 deg. one-piece heat shields prevent discoloration; more reliable than fastener-type heat shields. Integrated, smooth-flow baffles ensure tuning requirements of today's motors while emitting a deep rumble. Made in the U.S.A., INCLUDED ITEMS: Two exhaust pipes. One mounting bracket. Three 3/8 in.-16 x 3/4 in. button head bolts. Three 3/8 in. flat washers. Two 3/8 in. nuts. Two 1/4 in.-20 x 5/8 in. button head bolts. Four 1/4 in. star washers. Two 1/4 in. nuts. Two baffle inserts. Four hose clamps. , , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. D-801
1 on Hand
More Info/Options for Samson Big Guns 3 Cannon Exhaust System 4400207
|
|
|
|
CLOSEOUT!
Was: $474.99
Now: $356.24
Samson Big Guns 3 Slasher Exhaust System 4400210
Dennis Kirk Part #: 4400210
Samson Big Guns 3 Slasher Exhaust System 4400210: Manufacturer part # XL2-871 - Samson Exhaust revolutionizes motorcycle exhaust with this 3rd generation of the famous Big Gun line. Stepped pipes go from 1 3/4 in. to 2 1/4 in. to improve flow of spent exhaust gases. Seamless, permanent, 2 1/2 in., 220 deg. one-piece heat shields prevent discoloration; more reliable than fastener-type heat shields. Integrated, smooth-flow baffles ensure tuning requirements of today's motors while emitting a deep rumble. Made in the U.S.A.. NOTE: This will only fit 2004-06 XL with forward controls, this will be the 883c, 1200c, or 04-06 XL models with accessory forward controls installed NOTE: There is no warranty on exhaust pipes with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product section for products that will prevent or remove blueing.. XL2-871
1 on Hand
More Info/Options for Samson Big Guns 3 Slasher Exhaust System 4400210
|
|
|
|
CLOSEOUT!
Was: $474.99
Now: $356.24
Samson Big Guns 3 Street Sweeper Exhaust System 440055
Dennis Kirk Part #: 440055
Samson Big Guns 3 Street Sweeper Exhaust System 440055: Manufacturer part # XL2-859 - Samson Exhaust revolutionizes motorcycle exhaust with this 3rd generation of the famous Big Gun line. Stepped pipes go from 1 3/4 in. to 2 1/4 in. to improve flow of spent exhaust gases. Seamless, permanent, 2 1/2 in., 220 deg. one-piece heat shields prevent discoloration; more reliable than fastener-type heat shields. Integrated, smooth-flow baffles ensure tuning requirements of today's motors while emitting a deep rumble. Made in the U.S.A.. NOTES: This will only fit 2004-06 XL with forward controls, this will be the 883c, 1200c, or 04-06 XL models with accessory forward controls installed, , There is no warranty on exhaust pipes with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing, , See lubrication product section for products that will prevent or remove blueing.. XL2-859
1 on Hand
More Info/Options for Samson Big Guns 3 Street Sweeper Exhaust System 440055
|
|
|
|
CLOSEOUT!
Was: $474.99
Now: $356.24
Samson Big Guns 3 Boloney Exhaust System 4401411
Dennis Kirk Part #: 4401411
Samson Big Guns 3 Boloney Exhaust System 4401411: Manufacturer part # S-830 - Timeless good looks and superb sound that Samson is known for. Seamless, permanent 2 1/2", 220 one-piece heat shields prevent discoloration; more reliable than fastener-type heat shields. Integrated, smooth-flow baffles ensure tuning requirements of today's fuel-injected motors while emitting a deep rumble. Stepped pipes go from 1 3/4" to 2 1/4" to improve flow of spent exhaust gases. Made in the U.S.A., , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. S-830
1 on Hand
More Info/Options for Samson Big Guns 3 Boloney Exhaust System 4401411
|
|
|
|
CLOSEOUT!
Was: $470.99
Now: $282.59
H44184 Samson Big Guns II Long Cannon S-Pipe Exhaust System
Dennis Kirk Part #: H44184
H44184 Samson Big Guns II Long Cannon S-Pipe Exhaust System: Manufacturer part # XL2-538 - Never worry about unsightly discoloration again. All systems have 1 3/4 in. header pipes with 2 1/4 in. heat shields and 2 1/4 in. slip-on muffler bodies. All necessary mounting brackets and hardware included. Made in the U.S.A.. Will fit Sportsters only if they have forward controls. , , Note: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing, , See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing. XL2-538
3 on Hand
More Info/Options for H44184 Samson Big Guns II Long Cannon S-Pipe Exhaust System
|
|
|
|
CLOSEOUT!
Was: $452.99
Now: $339.74
H44661 Samson Big Guns II/Short Slashers Exhaust System
Dennis Kirk Part #: H44661
H44661 Samson Big Guns II/Short Slashers Exhaust System: Manufacturer part # D-571 - Never worry about unsightly discoloration again. All systems feature 2 1/4 in. full-coverage heat shields. All systems except the shortys have 1 3/4 in. header pipes and 2 1/4 in. slip-on muffler bodies. Shortys feature 1 3/4 in. pipes. No longer come with baffles. If you wish to use baffles please order H25187. All necessary mounting brackets and hardware included. Made in the U.S.A.. NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. D-571
2 on Hand
More Info/Options for H44661 Samson Big Guns II/Short Slashers Exhaust System
|
|
|
|
CLOSEOUT!
Was: $474.99
Now: $356.24
Samson Big Guns 3 High Low Longtails Exhaust System 4401670
Dennis Kirk Part #: 4401670
Samson Big Guns 3 High Low Longtails Exhaust System 4401670: Manufacturer part # S2-810 - Timeless good looks and superb sound that Samson is known for. Seamless, permanent 2 1/2", 220 one-piece heat shields prevent discoloration; more reliable than fastener-type heat shields. Integrated, smooth-flow baffles ensure tuning requirements of today's fuel-injected motors while emitting a deep rumble. Stepped pipes go from 1 3/4" to 2 1/4" to improve flow of spent exhaust gases. Made in the U.S.A.. , , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. S2-810
1 on Hand
More Info/Options for Samson Big Guns 3 High Low Longtails Exhaust System 4401670
|
|
