$760.99JIMS Timken Case Bearing Tool 959
Manufacturer: JIMS
Dennis Kirk Part #: 282786
JIMS Timken Case Bearing Tool: Manufacturer part # 959 - Changes left side crankshaft roller bearing to tougher Timken bearing. Press plate holds bearing insert in line with case bearing bore at the time it is being pressed into case. Stronger, more durable case than standard case bearing rides in. Also replaces bearings for 88" or 96" stock engines with JIMS precision insert. Steel bearing insert, drill bits for oil feed and return holes, hardware and instructions included. Timken bearings not included. Normal hand tools, hand drill and two-ton press are required.. 959 1 on hand
$292.99JIMS Fat 5 Transmission Door Puller and Bearing Tool 1077
Manufacturer: JIMS
Dennis Kirk Part #: 282689
JIMS Fat 5 Transmission Door Puller and Bearing Tool: Manufacturer part # 1077 - Installs/removes transmission door bearings. Removes transmission door without taking out the entire transmission assembly. For JIMS Fat 5 overdrive transmissions. , , NOTE: Door bearings must be replaced if using tool to pull door from case.. 1077 1 on hand
$152.99JIMS Main Drive Gear Bearing Tool 987
Manufacturer: JIMS
Dennis Kirk Part #: 282691
JIMS Main Drive Gear Bearing Tool: Manufacturer part # 987 - Properly installs new main transmission case bearing. Eliminates marring by holding bearing square to bore. For Dyna 06 models and all Twin Cam 07-08 models.. 987 1 on hand
$47.99Motion Pro Swingarm Pivot Bearing Tool 080140
Manufacturer: Motion Pro
Dennis Kirk Part #: H28401
Motion Pro Swingarm Pivot Bearing Tool: Manufacturer part # 080140 - Removes and installs the swingarm pivot bearings on Softail 84-99 models. Also removes and installs front fender pivot bearings on all FLSTS 97-01 models.. 080140 1 on hand
$84.99Cruz Tools DMX Fanny Pack Tool Kit DMX1
Manufacturer: Cruz Tools
Dennis Kirk Part #: 282229
Cruz Tools DMX Fanny Pack Tool Kit: Manufacturer part # DMX1 - Convenient, trail-ready tool kit. Contains:, 10mm and 12mm box end wrenches, 8mm, 10mm and 12mm 3-way T-handle wrenches, needle-nose-with-wire-cutter pliers, 3 hex keys, four-way screwdriver, three-way PackWrench™, Flashlight, 2 tire levers, and tire gauge. Also includes a roll of electric tape, WD-40®, 5/8 & 3/16 in. plug wrench and handle, plastic zip ties, wire, and a rag. Designed with heavy-duty hardware and mounting straps. Comes with a sturdy 5040-denier nylon carry pouch. Measures 7" x 10". DMX1 5 on hand
$68.99Woodys Steel Stud Sharpening Tool for 30 degree angle TOOL-SHARP-3
Manufacturer: Woodys
Dennis Kirk Part #: 080392
Woodys Steel Stud Sharpening Tool for 30 degree angle: Manufacturer part # TOOL-SHARP-3 - If your studs are sharp, your studs are safe. Fits into a 3/8 in. or larger drill chuck. Sharpens studs easily -even when they're still on your sled. Available for studs with 30º angles.. TOOL-SHARP-3 8 on hand
$18.99Woodys 5/16 Indexing Tool for Square Support Plates SPI-TOOL-5
Manufacturer: Woodys
Dennis Kirk Part #: 280001
Woodys 5/16 Indexing Tool for Square Support Plates: Manufacturer part # SPI-TOOL-5 - Fits on standard 3/8 in. drive ratchet handle and holds square support plate when nut is tightened to secure stud.. SPI-TOOL-5 7 on hand
$37.99Woodys Track Tension Tool TRAK-TOOL
Manufacturer: Woodys
Dennis Kirk Part #: 282676
Woodys Track Tension Tool: Manufacturer part # TRAK-TOOL - Use to adjust the tracks tension according to the manufacturers guidelines.. TRAK-TOOL More than 10 on hand
$68.99Woodys Steel Stud Sharpening Tool for 60 degree angle TOOL-SHARP-6
Manufacturer: Woodys
Dennis Kirk Part #: 080394
Woodys Steel Stud Sharpening Tool for 60 degree angle: Manufacturer part # TOOL-SHARP-6 - If your studs are sharp, your studs are safe. Fits into a 3/8 in. or larger drill chuck. Available for studs with 30°, 45° or 60° angles.. TOOL-SHARP-6 1 on hand
$24.99Woodys Indexing Tool for Triangle Support Plates SPI-TOOL-T
Manufacturer: Woodys
Dennis Kirk Part #: 282675
Woodys Indexing Tool for Triangle Support Plates: Manufacturer part # SPI-TOOL-T - Save time and knuckles. Stud size, 5/16in. and 7mm. Fit on standard 3/8 in. drive ratchet handle and index support plates.. SPI-TOOL-T 2 on hand
$68.99Woodys Steel Stud Sharpening Tool for 45 degree angle TOOL-SHARP-4
Manufacturer: Woodys
Dennis Kirk Part #: 080393
Woodys Steel Stud Sharpening Tool for 45 degree angle : Manufacturer part # TOOL-SHARP-4 - If your studs are sharp, your studs are safe. Fits into a 3/8 in. or larger drill chuck. Sharpens studs easily - even when they're still on your sled. Available for studs 45° angles.. TOOL-SHARP-4 2 on hand
$33.99Performance Tool Stubby Tool Set W39000
Manufacturer: Performance Tool
Dennis Kirk Part #: 282455
Performance Tool Stubby Tool Set : Manufacturer part # W39000 - Versatile 45-piece SAE and metric socket and screwdriver set made from chrome vanadium steel. Short-handled dual-drive ratchet with 1/4" and 3/8" drives and 72 gear teeth for speed and durability. 1/4" and 3/8" drive SAE sockets in sizes in 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8" and 3/4". Metric sockets in sizes 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 and 17mm. Open-end adjustable wrench has a 1" rule on head. Ratcheting screwdriver along with 5/32", 3/16" and 1/4" slotted; #1, #2 and #3 Phillips; T-15 and T-20 star; and 1/8" and 1/4" hex bits. Ratchet, adjustable wrench and screwdriver feature comfortable rubber cushion grip handles. Set includes adapters, extension and a convenient plastic carrying case (10 1/2 in. x 8 in.).. W39000 10 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
