|
|
|
|
|
|
|
|
|
|
$99.99
Kuryakyn Louvered Chrome Battery Box Cover 3913
Manufacturer: Kuryakyn
Dennis Kirk Part #: 208949
Kuryakyn Louvered Chrome Battery Box Cover: Manufacturer part # 3913 - Look at all those dull, gray stock battery box covers surrounded by all that glowing paint and sparkling chrome. They look a little out of place. These covers feature a lustrous chrome finish, cutting edge louvered styling and even provisions for adding custom back lighting. Covers this cool will stand out for their contemporary styling and distinctive good looks.. 3913
2 on hand
More Info/Options for Kuryakyn Louvered Chrome Battery Box Cover 3913
Battery Box
|
|
|
|
$69.99
International Battery Tender Plus INTL BATTERY TEN
Manufacturer: Battery Tender
Dennis Kirk Part #: 281873
International Battery Tender Plus: Manufacturer part # INTL BATTERY TEN - Programmed to monitor the new sealed maintenance-free AGM (Absorbed Glass Matte) batteries. 12V-1.25A battery charger with an input voltage range of 100-240V. High-frequency design offers cooler and more efficient operation. Fully automatic constant charging consists of initialization, bulk, absorption and float/maintenance. Converts to float charger and monitors battery at 13.2 volts once a full charge is reached. Temperature compersation sensor is new and improved to adjust voltage for extreme heat or cold. Water-resistant, lightweight and compact. Comes with accessory pouch.. INTL BATTERY TEN
3 on hand
More Info/Options for International Battery Tender Plus INTL BATTERY TEN
Battery Box
|
|
|
|
$30.99
Battery Tender Jr. 6-Volt Model BATTERY TENDER J
Manufacturer: Battery Tender
Dennis Kirk Part #: 28764
Battery Tender Jr. 6-Volt Model: Manufacturer part # BATTERY TENDER J - Two-stage, fully automatic battery charger. Suitable for lead-acid, sealed maintenance-free and gel cell batteries. Smart trickle charger maintains battery when charging process is finished. Lightweight and compact -- perfect for use when space is limited. Two-color LED indicator. Reverse polarity protection. Comes with both 12 output cord and quick-connect/disconnect snapcord. Two-year manufacturers warranty.. BATTERY TENDER J
More than 10 on hand
More Info/Options for Battery Tender Jr. 6-Volt Model BATTERY TENDER J
Battery Box
|
|
|
|
$59.99
Battery Tender Plus - 6V/1.25 Amps BATTERY TENDER P
Manufacturer: Battery Tender
Dennis Kirk Part #: 281822
Battery Tender Plus - 6V/1.25 Amps: Manufacturer part # BATTERY TENDER P - Now you can constantly monitor a battery without the damaging effects of trickle chargers that eventually boil dry or overcharge batteries A charge cycle initially brings the battery to a full charge at approximately 14.2 volts. After the battery is fully charged, the Battery Tender Plus converts to a float charger and monitors the battery at 13.2 volts. Some periodic maintenance is recommended, but Battery Tender Plus will monitor a battery for years without boiling or destroying it. Features new fused quick disconnect rings with a weather cover. This has 1.25 amps. , , NOTE: Earlier model Battery Tenders have a WHITE snap cord connector; later models have a BLACK snap connector. These snap cords are NOT interchangeable.. BATTERY TENDER P
5 on hand
More Info/Options for Battery Tender Plus - 6V/1.25 Amps BATTERY TENDER P
Battery Box
|
|
|
|
$30.99
Battery Tender Junior 12-Volt Model BATTERY TENDER J
Manufacturer: Battery Tender
Dennis Kirk Part #: 28765
Battery Tender Junior 12-Volt Model: Manufacturer part # BATTERY TENDER J - Two-stage, fully automatic battery charger. Suitable for lead-acid, sealed maintenance-free and gel cell batteries. Smart trickle charger maintains battery when charging process is finished. Automatically converts to float charger, monitoring battery at 13.2 volts once 14.4 VDC charge is attained. Should battery drop below 12.6 volts, full charging resumes until 14.4 VDC is reached again -- battery is always ready to go. Lightweight and compact -- perfect for use when space is limited. Two-color LED indicator. Reverse polarity protection. Comes with both 12 output cord and quick-connect/disconnect snapcord. Two-year manufacturers warranty.. BATTERY TENDER J
More than 10 on hand
More Info/Options for Battery Tender Junior 12-Volt Model BATTERY TENDER J
Battery Box
|
|
|
|
$60.99
Battery Tender Plus BATTERY TENDER P
Manufacturer: Battery Tender
Dennis Kirk Part #: 28918
Battery Tender Plus: Manufacturer part # BATTERY TENDER P - Now you can constantly monitor a battery without the damaging effects of trickle chargers that eventually boil dry or overcharge batteries. A charge cycle initially brings the battery to a full charge at approximately 14.2 volts. After the battery is fully charged, the Battery Tender Plus converts to a float charger and monitors the battery at 13.2 volts. While a constant charge is maintained to the battery, there is little or no current (approximately 10 milliamp). Some periodic maintenance is recommended, but Battery Tender Plus will monitor a battery for years without boiling or destroying it. Features new fused quick disconnect rings with a weather cover, , Replacement Black Snap Cord - Part No. 28919. , NOTE: Earlier model Battery Tenders have a white snap cord connector; later models have a black snap connector. These snap cords are NOT interchangeable. BATTERY TENDER P
More than 10 on hand
More Info/Options for Battery Tender Plus BATTERY TENDER P
Battery Box
|
|
|
|
|
|
