$342.99Matt Hotch Designs EPA Star Gas Cap with Bung p183190
Manufacturer: Matt Hotch Designs
Dennis Kirk Part #: 183191
Matt Hotch Designs EPA Star Gas Cap with Bung: Manufacturer part # p183190 - The coolest flush-mount gas caps available. Feature pop-up stainless steel vented caps that can be polished or painted. Replacement caps and bung are available separately. Replacement caps also fit independent gas tanks that use Matt Hotch pop-up caps. Made in the U.S.A., , NOTE: EPA compliant caps quard against spillage in rollover and meet NHTSA standards.. p183190 1 on hand
$275.99Matt Hotch Designs EPA Flush Gas Cap with Bung p183186
Manufacturer: Matt Hotch Designs
Dennis Kirk Part #: 183186
Matt Hotch Designs EPA Flush Gas Cap with Bung: Manufacturer part # p183186 - The coolest flush-mount gas caps available. Feature pop-up stainless steel vented caps that can be polished or painted. Replacement caps and bung are available separately. Replacement caps also fit independent gas tanks that use Matt Hotch pop-up caps. Made in the U.S.A., , NOTE: EPA compliant caps quard against spillage in rollover and meet NHTSA standards.. p183186 1 on hand
$241.99R&D High-Performance Flame Arrestor/Air Filter Kits 21515010
Manufacturer: R&D
Dennis Kirk Part #: 304628
R&D High-Performance Flame Arrestor/Air Filter Kits: Manufacturer part # 21515010 - Give your engine high-performance racing looks, sound and ability. Increase throttle response and acceleration. Adds three to five horsepower on stock 4-stroke engines.. 21515010 1 on hand
$39.95Jetlyne Velocity Stack Flame Arrestor Adaptor 820147
Manufacturer: Jetlyne
Dennis Kirk Part #: 182120
Jetlyne Velocity Stack Flame Arrestor Adaptor: Manufacturer part # 820147 - Not just your normal adapter. Features a built-in velocity stack for an added boost of performance. Use in conjunction with Prok and Tau Ceti flame arrestors. 820147 3 on hand
$30.99K & N Flame Arrestor Adapter Carburetor Bracket 85-9000
Manufacturer: K & N
Dennis Kirk Part #: 301537
K & N Flame Arrestor Adapter Carburetor Bracket: Manufacturer part # 85-9000 - Adapters feature a two-piece design that ensures mounting bolts will not come loose.. 85-9000 1 on hand
$72.99K & N Standard Dual Flame Arrestor 59-2880
Manufacturer: K & N
Dennis Kirk Part #: 301596
K & N Standard Dual Flame Arrestor: Manufacturer part # 59-2880 - K&N has the only filter approved by the U.S. Coast Guard as a flame arrestor. Increases horsepower and is unaffected by moisture. Adapters feature a 2-piece design that assures mounting bolts wont come loose. Adapter required to mount arrestor to carburetor - sold separately and sold each. This is a Dual carb flame arrestor, only one is needed per machine. 59-2880 3 on hand
$53.99K & N Tapered Flame Arrestor 59-2040
Manufacturer: K & N
Dennis Kirk Part #: 301541
K & N Tapered Flame Arrestor: Manufacturer part # 59-2040 - K&N has the only filter approved by the U.S. Coast Guard as a flame arrestor. Increases horsepower and is unaffected by moisture. Adapters feature a 2-piece design that assures mounting bolts wont come loose. Adapter required to mount arrestor to carburetor - sold separately and sold each.. 59-2040 1 on hand
$60.99K & N Standard Flame Arrestor 59-2000
Manufacturer: K & N
Dennis Kirk Part #: 30677
K & N Standard Flame Arrestor: Manufacturer part # 59-2000 - K&N has the only filter approved by the U.S. Coast Guard as a flame arrestor. Increases horsepower and is unaffected by moisture. Adapters feature a 2-piece design that assures mounting bolts wont come loose. Adapter required to mount arrestor to carburetor - sold separately and sold each.. 59-2000 4 on hand
$50.99K & N Tapered Race Flame Arrestor 59-2042R
Manufacturer: K & N
Dennis Kirk Part #: 301802
K & N Tapered Race Flame Arrestor: Manufacturer part # 59-2042R - K&N has the only filter approved by the U.S. Coast Guard as a flame arrestor. Increases horsepower and is unaffected by moisture. Adapters feature a 2-piece design that assures mounting bolts wont come loose. Adapter required to mount arrestor to carburetor - sold separately and sold each. , RACING FLAME ARRESTORS Allow up to 20 percent more airflow than other arrestors. Incoming air is smoothed and straightened to give your PWC more power. Marine approved to SAE J1928 standards. Order one per carb.. 59-2042R More than 10 on hand
$68.99K & N Flame Arrestor Adapter 85-9291
Manufacturer: K & N
Dennis Kirk Part #: 301160
K & N Flame Arrestor Adapter: Manufacturer part # 85-9291 - K&N has the only filter approved by the U.S. Coast Guard as a flame arrestor. Increases horsepower and is unaffected by moisture. Adapters feature a 2-piece design that assures mounting bolts wont come loose. Adapter required to mount arrestor to carburetor - sold separately and sold each.. 85-9291 2 on hand
$1115.99Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide 07010189
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183331
Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide: Manufacturer part # 07010189 - 6-gallon one-piece tanks are 1 1/2 in. wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , NOTE: This item ships 3 or 4 days after the order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010189 1 on hand
$1115.99Russ Wernimont Designs Carb Gas Tank - 17 1/2 in. wide p183703
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183704
Russ Wernimont Designs Carb Gas Tank - 17 1/2 in. wide: Manufacturer part # p183703 - 17 1/2" and 20 1/2 in. widths are now available. A 3 in. stretch is featured on one-piece tanks. Curved bottom provides a custom look. Raw dash panel replaces the existing dash. Inside of tanks have a factory sealed powder coat primer. OEM fuel-pump assemblies are accepted on 03-07 style fuel-injected tanks and 96-06 style carb tanks include a filler plate/neck assembly; both use L96-08 non-vented gas caps. Approximate 6-gallon capacity. Tanks fit with RWD Profile (454538) and ProTour (454539) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , Dimensions , Length: 22 1/2 in., Width: 18 in., Tunnel Length: 18 1/2 in., , Tunnel Width , Front: 3 1/2 in., Rear: 5 in., , Tunnel Depth: , Front: 4 1/2 in., Rear: 4 1/4 in., , Tank Height: 9 in., Fuel Petcock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit., , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. p183703 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
