$47.99Fast-Trac Round XL Air Lite Backer Plates 605RR-96
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080441
Fast-Trac Round XL Air Lite Backer Plates: Manufacturer part # 605RR-96 - Lighter and less expensive than aluminum. Constructed from DuPont polymers. Round XL has a 1 3/8 in. outer diameter and 1/2 in. added height for better support of 1.175 in. and longer studs. 5/16 in. through-hole.. 605RR-96 Expected Soon
$47.99Fast-Trac Round XL Air Lite Backer Plates 607RY-96
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080443
Fast-Trac Round XL Air Lite Backer Plates: Manufacturer part # 607RY-96 - Lighter and less expensive than aluminum. Constructed from DuPont polymers. Round XL has a 1 3/8 in. outer diameter and 1/2 in. added height for better support of 1.175 in. and longer studs. 5/16 in. through-hole.. 607RY-96 2 on hand
$47.99Fast-Trac Round XL Air Lite Backer Plates 602RG-96
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080439
Fast-Trac Round XL Air Lite Backer Plates: Manufacturer part # 602RG-96 - Lighter and less expensive than aluminum. Constructed from DuPont polymers. Round XL has a 1 3/8 in. outer diameter and 1/2 in. added height for better support of 1.175 in. and longer studs. 5/16 in. through-hole.. 602RG-96 1 on hand
$47.99Fast-Trac Round XL Air Lite Backer Plates 600RX-96
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080435
Fast-Trac Round XL Air Lite Backer Plates: Manufacturer part # 600RX-96 - Lighter and less expensive than aluminum. Constructed from DuPont polymers. Round XL has a 1 3/8 in. outer diameter and 1/2 in. added height for better support of 1.175 in. and longer studs. 5/16 in. through-hole.. 600RX-96 5 on hand
$47.99Fast-Trac Round XL Air Lite Backer Plates 601RB-96
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080437
Fast-Trac Round XL Air Lite Backer Plates: Manufacturer part # 601RB-96 - Lighter and less expensive than aluminum. Constructed from DuPont polymers. Round XL has a 1 3/8 in. outer diameter and 1/2 in. added height for better support of 1.175 in. and longer studs. 5/16 in. through-hole.. 601RB-96 2 on hand
CLEARANCE!
Was: $119.95
Now: $107.96
WileyX XL-1 Sunglasses 296
Manufacturer: WileyX
Dennis Kirk Part #: 326014
WileyX XL-1 Sunglasses: Manufacturer part # 296 - XL-1 frame seals your eyes from the elements with Ultra Foam frame seal and Facial Cavity design. Virtually unbreakable frame comes in matte black. Two-lens package includes a Clear lens for hazy overcast conditions and a Polarized smoke lens for UV protection and unmatched clarity. Replacement lenses sold separately, , Optional/Replacement Lenses Smoke - 326438 Clear - 326439 Light-adjusting - 326441 Polarized Smoke - 326440. .. 296 3 on hand
$180.99ITP Mudlite XL SS108 Alloy Tire/Wheel Kit 41397L
Manufacturer: ITP
Dennis Kirk Part #: 553952
ITP Mudlite XL SS108 Alloy Tire/Wheel Kit: Manufacturer part # 41397L - Kits feature a lightweight 26" Mud Lite XL tire mounted on the all new SS Alloy wheel. The perfect choice for most mid-sized 4x4 ATVs. SS Alloy wheels are the strongest, lightest and best-looking wheels on the market; SS108 is available with a diamond-cut machined finish with black accents or a sleek satin black finish. Custom center cap included. Front is 26x10-12, rear is 26x12-12. Tires are 6-ply rated. Lug nuts sold separately. , , NOTE:, To order for an entire machine, please order separate right and left front kits and separate right and left rear kits., , Whenever changing to oversize tires on a four-wheel drive ATV, you must install all four wheels and tires as listed for your vehicle, , Following models must use ITP lug nuts part number 553772:, Honda TRX500FA/FGA Foreman Rubicon 4x4 2001-2008 (all), Yamaha YFM600 Grizzly 4x4 1999-2001 (all). , , DIMENSIONS. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not specified. , Acceptable Rim Width: Not specified. , Deepest Tread Depth: 1". , Directional Arrow: Yes. , Balance Dot: No. , Speed Rating: None. , , CAPACITIES AND CONSTRUCTION:. , Bias or Radial Ply: Bias. , Load Capacity 520 LBS. , Maximun Inflation Pressure to Seat Bead: 25 PSI. , Maximum Operating Pressure: 7 PSI. , Tread Plies/Material: 6 Nylon. , Sidewall Plies/Material: 6 Nylon. , DOT Approved for Road Use: No. , Tube or Tubeless: Tubeless. , Wheel Recommendation: Bead lock wheel. 41397L 1 on hand
$177.99ITP Mud Lite XL C-Series Type 7 Machined Wheel Kit 35815R
Manufacturer: ITP
Dennis Kirk Part #: 552361
ITP Mud Lite XL C-Series Type 7 Machined Wheel Kit: Manufacturer part # 35815R - Ideal for most mid-sized 4x4 ATVs. Kits include 26" Mud Lite tire mounted on C-Series Type 7 12" wheel. 6-ply rated. Sold each. Lug nuts and center caps sold separately NOTE: To order for an entire machine, please order separate right and left front kits and separate right and left rear kits., , Whenever changing to oversize tires on a four-wheel drive ATV, you must install all four wheels and tires as listed for your vehicle., , Honda TRX500FA/FGA Foreman Rubicon 4x4 01-08 (all), Kymco MXU 500 4x4 08 (all), Yamaha YFM600F Grizzly 4x4 99-01 (all) must use ITP lug nut Part No. 55-0205; stock lug nut does not work, , Rear wheel offset 1" wider than stock Suzuki Eiger/Vinson wheel on Suzuki models LT-F/LT-A400/F/FC Eiger 2x4/4x4 02-07 (all) and LT-F/LT-A500F/FB/FC Vinson 2x4/4x4 02-07 (all). , , Dimensions. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not specified. , Acceptable Rim Width(s): Not specified. , Deepest Tread Depth: 1 2/32". , Balance Dot: No. , Directional Arrow: Yes. 35815R 1 on hand
$168.99ITP Mud Lite XL C-Series Type 7 Black Wheel Kit 37582L
Manufacturer: ITP
Dennis Kirk Part #: 552398
ITP Mud Lite XL C-Series Type 7 Black Wheel Kit: Manufacturer part # 37582L - Ideal for most mid-sized 4x4 ATVs. Kits include 26" Mud Lite tire mounted on C-Series Type 7 12" wheel. 6-ply rated. Sold each. Lug nuts and center caps sold separately NOTE: To order for an entire machine, please order separate right and left front kits and separate right and left rear kits., , NOTE: , Whenever changing to oversize tires on a four-wheel drive ATV, you must install all four wheels and tires as listed for your vehicle. NOTE: Honda TRX500FA/FGA Foreman Rubicon 4x4 01-08 (all), Honda TRX650/680FA/FGA Rincon 4x4 03-08 (all), Kymco MXU 500 4x4 08 (all), Yamaha YFM600F Grizzly 4x4 99-01 (all) must use ITP lug nut Part No. 55-0205; stock lug nut does not work , , NOTE: Rear wheel offset 1" wider than stock Suzuki Eiger/Vinson wheel on Suzuki models LT-F/LT-A400/F/FC Eiger 2x4/4x4 02-07 (all) and LT-F/LT-A500F/FB/FC Vinson 2x4/4x4 02-07 (all). , , Dimensions. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not Specified. , Acceptable Rim Width(s): Not specified. , Deepest Tread Depth: 1". , Balance Dot: No. , Directional Arrow: Yes. , , Capacities and Construction:. , Load Capacity: 440 LBS. , Maximum Inflation Pressure to Seat Bead: 25 PSI. , Maximum Operation Pressure: 7 PSI. , Bias or Radial Ply: Bias. , Tread Plies/Material: Not specified. , Sidewall Plies/Material: Not specified. , DOT Approved For Road Use: No. , Tube or Tubeless: Tubeless. , Wheel Recommendation: Beadlock Wheel. 37582L 2 on hand
$177.99ITP Mud Lite XL C-Series Type 7 Black Wheel Kit 37583L
Manufacturer: ITP
Dennis Kirk Part #: 552400
ITP Mud Lite XL C-Series Type 7 Black Wheel Kit: Manufacturer part # 37583L - Ideal for most mid-sized 4x4 ATVs. Kits include 26" Mud Lite tire mounted on C-Series Type 7 12" wheel. 6-ply rated. Sold each. Lug nuts and center caps sold separately NOTE: To order for an entire machine, please order separate right and left front kits and separate right and left rear kits., , NOTE: , Whenever changing to oversize tires on a four-wheel drive ATV, you must install all four wheels and tires as listed for your vehicle. NOTE: Honda TRX500FA/FGA Foreman Rubicon 4x4 01-08 (all), Kymco MXU 500 4x4 08 (all), Yamaha YFM600F Grizzly 4x4 99-01 (all) must use ITP lug nut Part No. 55-0205; stock lug nut does not work , , NOTE: Rear wheel offset 1" wider than stock Suzuki Eiger/Vinson wheel on Suzuki models LT-F/LT-A400/F/FC Eiger 2x4/4x4 02-07 (all) and LT-F/LT-A500F/FB/FC Vinson 2x4/4x4 02-07 (all). , , Dimensions. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not specified. , Acceptable Rim Width(s): Not specified. , Deepest Tread Depth: 1 2/32". , Balance Dot: No. , Directional Arrow: Yes. 37583L 2 on hand
$171.99ITP Mud Lite XL SS106 Alloy Wheel Kit 41270L
Manufacturer: ITP
Dennis Kirk Part #: 553623
ITP Mud Lite XL SS106 Alloy Wheel Kit: Manufacturer part # 41270L - Kits feature a lighweight 26 in. Mud Lite XL tire mounted on the all new SS Alloy wheel. The perfect choice for most mid-sized 4x4 ATVs. SS Alloy wheels are the strongest, lightest and best-looking wheels on the market; available in SS106 and SS112 styles that feature a diamond-cut machined finish with black accents and a custom center cap. Tires are 6-ply rated. Lug nuts sold separately. , , NOTE:, To order for an entire machine, please order separate right and left front kits and separate right and left rear kits., , Whenever changing to oversize tires on a four-wheel drive ATV, you must install all four wheels and tires as listed for your vehicle, , Following models must use ITP lug nuts part number 553772:, Honda TRX500FA/FGA Foreman Rubicon 4x4 2001-2008 (all), Honda TRX650/680FA/FGA Rincon 4x4 03-08 (all), Yamaha YFM600 Grizzly 4x4 1999-2001 (all). , , DIMENSIONS. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not specified. , Acceptable Rim Width: Not specified. , Deepest Tread Depth: 1". , Directional Arrow: Yes. , Balance Dot: No. , Speed Rating: None. , , CAPACITIES AND CONSTRUCTION:. , Bias or Radial Ply: Bias. , Load Capacity 440 LBS. , Maximun Inflation Pressure to Seat Bead: 25 PSI. , Maximum Operating Pressure: 7 PSI. , Tread Plies/Material: 6 Nylon. , Sidewall Plies/Material: 6 Nylon. , DOT Approved for Road Use: No. , Tube or Tubeless: Tubeless. , Wheel Recommendation: Bead lock wheel. 41270L 1 on hand
$161.99ITP Mud Lite XL SS112 Alloy Wheel Kit 41305L
Manufacturer: ITP
Dennis Kirk Part #: 553680
ITP Mud Lite XL SS112 Alloy Wheel Kit: Manufacturer part # 41305L - Kits feature a lighweight 26 in. Mud Lite XL tire mounted on the all new SS Alloy wheel. The perfect choice for most mid-sized 4x4 ATVs. SS Alloy wheels are the strongest, lightest and best-looking wheels on the market; available in SS106 and SS112 styles that feature a diamond-cut machined finish with black accents and a custom center cap. Tires are 6-ply rated. Lug nuts sold separately. , , NOTE:, To order for an entire machine, please order separate right and left front kits and separate right and left rear kits., , Whenever changing to oversize tires on a four-wheel drive ATV, you must install all four wheels and tires as listed for your vehicle, , Following models must use ITP lug nuts part number 553772:, Honda TRX500FA/FGA Foreman Rubicon 4x4 2001-2008 (all), Honda TRX650/680FA/FGA Rincon 4x4 03-08, Yamaha YFM600 Grizzly 4x4 1999-2001 (all). , , DIMENSIONS. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not specified. , Acceptable Rim Width: Not specified. , Deepest Tread Depth: 1". , Directional Arrow: Yes. , Balance Dot: No. , Speed Rating: None. , , CAPACITIES AND CONSTRUCTION:. , Bias or Radial Ply: Bias. , Load Capacity 440 LBS. , Maximun Inflation Pressure to Seat Bead: 25 PSI. , Maximum Operating Pressure: 7 PSI. , Tread Plies/Material: 6 Nylon. , Sidewall Plies/Material: 6 Nylon. , DOT Approved for Road Use: No. , Tube or Tubeless: Tubeless. , Wheel Recommendation: Bead lock wheel. 41305L 1 on hand
