$206.99Arlen Ness Radius Grooved Billet Sucker Stage II Air Cleaner Assembly 18-800
Manufacturer: Arlen Ness
Dennis Kirk Part #: H30630
Arlen Ness Radius Grooved Billet Sucker Stage II Air Cleaner Assembly: Manufacturer part # 18-800 - Gain tremendous air flow from the oversized exposed filter design. Breather passages exit at the mouth of the carb, creating a virtually closed-loop system. Each kit includes a high flow air filter, chrome outer cover, chrome backing plate/support bracket and all necessary hardware.. 18-800 5 on hand
$40.99R&D Pump Shoe Seal Kit for Kawasaki 750/800 Stand-Up 16180000
Manufacturer: R&D
Dennis Kirk Part #: 091876
R&D Pump Shoe Seal Kit for Kawasaki 750/800 Stand-Up: Manufacturer part # 16180000 - Once you install and seal using this kit, the pump cavity of your watercraft will be 100 percent free of air pockets or leaks. Individually molded cavity plugs are designed to fill large-cavity air pockets in the OEM pump shoe.. 16180000 1 on hand
$49.99CTEK US 800 Battery Charger 4202
Manufacturer: CTEK
Dennis Kirk Part #: 201892
CTEK US 800 Battery Charger: Manufacturer part # 4202 - Recharges in less time than conventional chargers. No need to remove battery from the vehicle. Charges all types of batteries (wet, sealed and AGM). Sealed design is weatherproofed, can be used outdoors. Compact, lightweight and easily portable. Impossible to incorrectly connect to battery. Patented technology protects against sparks, short circuits and reverse polarity. Will not harm sensitive electronic components. Quick connect cord set included. , , CTEK US 800 . Easily charges all small batteries, excellent maintenance charger for seasonal vehicles with batteries up to 100 Ah. Recovers or "wakes" a sulfated or under-charged battery. Charges at 0.8A. Sends out current pulses for charge maintenance, will not overcharge battery. , , CTEK MUTLI US 3300 . Can handle all but the largest batteries. Recovers or "wakes" a sulfated or under-charged battery. Three charging modes: 0.8A @ 14.4V; 3.3A @ 14.4V; and 3.3A @ 14.7V. Unique cold temperature mode enables faster re-charging even in the coldest weather conditions.. 4202 2 on hand
$1073.99Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide RWD-800
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183039
Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide: Manufacturer part # RWD-800 - 6-gallon one-piece tanks are 1 1/2" wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available:4555061, 455067, 455062, 455063, 455064, 455065, 455066 and 455060. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. RWD-800 1 on hand
$273.99Shoei TZ-R Solid Helmet 01-800
Manufacturer: Shoei
Dennis Kirk Part #: 3300828XXS
Shoei TZ-R Solid Helmet: Manufacturer part # 01-800 - Shoei has been making top quality helmets for more than 40 years Snell M2000 and DOT certified. Aerodynamic shell design is the product of extensive wind-tunnel testing and feedback from professional riders. Shell constructed from lightweight, Advanced Integrated Matrix (AIM) -- high-performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultralightweight, rigid and resilient. Two-layer EPS Liner System offers unmatched ventilation with internal channels and exhaust ports throughout the helmet. Integrated Upper Air Intake minimizes air turbulence and maximizes air stream. Lower air intake provides an additional source of air flow; neck exhaust outlet. Lower air intake also provides airflow that helps to diminish shield fogging. 3-D interior liner is ergonomically designed to offer safety, fit and comfort. Entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning. Quick-Release Base Plate (Q.R.B.P.) allows tool-less shield removal. Wide, three-dimensionally curved shield offers increased peripheral vision and optical clarity; scratch-resistant coating. A preset lever locks shield in place to prevent unexpected opening. Medium helmet weighs 3 lb., 3oz.. Comes with clear face shield.. 01-800 1 on hand
CLEARANCE!
Was: $170.99
Now: $128.24
HJC CL-SP Helmet 372-800
Manufacturer: HJC
Dennis Kirk Part #: 3301953XXS
HJC CL-SP Helmet: Manufacturer part # 372-800 - Snell M2005 and DOT certified. New hyper-sport helmet features aggressive shell sculpture, innovative features and comfort. Injection-molded polycarbonate composite shell construction. Wind tunnel-tested aerodynamic shell shape with an extra-large eye port for greater visibility. Channeled, dual-density EPS (expanded polystyrene) liner. Flow-through advanced channeling ventilation system has dual flow-through channels, two high-capacity multi-stage forehead intake vents and venturi exhaust spoiler. Anti-fog system includes side chin bar-mounted vortex vents that create a low-pressure vacuum effect that draws heat and moisture out of the face shield area. Adjustable chin vent re-directs air upward and across shield interior. Next-generation shield closure system has a two-stage pivot mechanism that compresses the shield into the eye port gasket providing an extremely secure seal. Improved, no-tool shield removal and installation. Scratch-resistant hard-coated, anti-fog shield is rated at 95% UV resistant. Removable/washable Bioceramic Nylex interior quickly wicks moisture away from skin and elminates odor-causing bacteria. Streamlined, wraparound neck roll reduces wind noise. Built-in communication system speaker cavity. Padded double D-ring retention strap. Medium weighs 3 lb., 11 oz... 372-800 2 on hand
$235.99ABUS Electronic Granit Detecto 800 Brake Disc Lock p407920
Manufacturer: ABUS
Dennis Kirk Part #: 407920
ABUS Electronic Granit Detecto 800 Brake Disc Lock: Manufacturer part # p407920 - Electronic brake disc lock with a 14mm hardened bolt. 3-D position control for immediate alarm when position changes or shocks are detected. High-quality steel lock has ABUS X-Plus locking for extreme protection against unlawful opening. Includes batteries.. p407920 4 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
