|
|
$207.99
Wild 1 Inc. Chubby 8 1/2 in. Baby Ape Hanger Bar WO513
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595074
Wild 1 Inc. Chubby 8 1/2 in. Baby Ape Hanger Bar: Manufacturer part # WO513 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls, stock risers and top clamps. Made in the U.S.A... WO513
Expected Soon
More Info/Options for Wild 1 Inc. Chubby 8 1/2 in. Baby Ape Hanger Bar WO513
8 1 1/2
|
|
|
|
|
|
$357.99
Carlini 1 1/2 in. Super Sweep Tee Bar SS1509
Manufacturer: Carlini
Dennis Kirk Part #: H59292
Carlini 1 1/2 in. Super Sweep Tee Bar: Manufacturer part # SS1509 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended, , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required.. SS1509
3 on hand
More Info/Options for Carlini 1 1/2 in. Super Sweep Tee Bar SS1509
8 1 1/2
|
|
|
|
$357.99
Carlini 1 1/2 in. Super Sweep Tee Bar SS1.50-7
Manufacturer: Carlini
Dennis Kirk Part #: H59291
Carlini 1 1/2 in. Super Sweep Tee Bar: Manufacturer part # SS1.50-7 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. , , NOTE: New handlebar busings recommended.. SS1.50-7
1 on hand
More Info/Options for Carlini 1 1/2 in. Super Sweep Tee Bar SS1.50-7
8 1 1/2
|
|
|
|
$353.99
Carlini 1 1/2 in. Slickback Bar SB1.50
Manufacturer: Carlini
Dennis Kirk Part #: 594297
Carlini 1 1/2 in. Slickback Bar: Manufacturer part # SB1.50 - Precision manufactured, 1 1/2 in. diameter chrome-plated tee bars. Both bars are pre-dimpled and pre-drilled for internal wiring. Easy installation with rope routed through wiring passages on Slickback bar. 1/2 in.-13 threads on 3 1/2 in. centers. Made in the U.S.A... SB1.50
Expected Soon
More Info/Options for Carlini 1 1/2 in. Slickback Bar SB1.50
8 1 1/2
|
|
|
|
$353.99
Carlini 1 1/2 in. Lowdown Bar LD1.50
Manufacturer: Carlini
Dennis Kirk Part #: 594298
Carlini 1 1/2 in. Lowdown Bar: Manufacturer part # LD1.50 - Precision manufactured, 1 1/2 in. diameter chrome-plated tee bars. Both bars are pre-dimpled and pre-drilled for internal wiring. Easy installation with rope routed through wiring passages on Slickback bar. 1/2 in.-13 threads on 3 1/2 in. centers. Made in the U.S.A... LD1.50
2 on hand
More Info/Options for Carlini 1 1/2 in. Lowdown Bar LD1.50
8 1 1/2
|
|
|
|
$357.99
Carlini 1 1/2 in. Clean Sweep Tee Bar CS1.50-7
Manufacturer: Carlini
Dennis Kirk Part #: H59784
Carlini 1 1/2 in. Clean Sweep Tee Bar: Manufacturer part # CS1.50-7 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE: New bushings are recommended. CS1.50-7
2 on hand
More Info/Options for Carlini 1 1/2 in. Clean Sweep Tee Bar CS1.50-7
8 1 1/2
|
|
|
|
$357.99
Carlini 1 1/2 in. Super Sweep Tee Bar SPORSTER150
Manufacturer: Carlini
Dennis Kirk Part #: H59290
Carlini 1 1/2 in. Super Sweep Tee Bar: Manufacturer part # SPORSTER150 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended, , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required.. SPORSTER150
2 on hand
More Info/Options for Carlini 1 1/2 in. Super Sweep Tee Bar SPORSTER150
8 1 1/2
|
|
|
|
$357.99
Carlini 1 1/2 in. Clean Sweep Tee Bar CS1509
Manufacturer: Carlini
Dennis Kirk Part #: H59786
Carlini 1 1/2 in. Clean Sweep Tee Bar: Manufacturer part # CS1509 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE: New bushings are recommended. CS1509
3 on hand
More Info/Options for Carlini 1 1/2 in. Clean Sweep Tee Bar CS1509
8 1 1/2
|
|
|
|
$357.99
Carlini 1 1/2 in. Clean Sweep Tee Bar CS1505
Manufacturer: Carlini
Dennis Kirk Part #: H59782
Carlini 1 1/2 in. Clean Sweep Tee Bar: Manufacturer part # CS1505 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , , NOTE: New handlebar busings recommended. CS1505
1 on hand
More Info/Options for Carlini 1 1/2 in. Clean Sweep Tee Bar CS1505
8 1 1/2
|
|
|
|
$149.95
Drag Specialties Buffalo 9 1/2 in. Apehanger Bar for Springers 300341
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59771
Drag Specialties Buffalo 9 1/2 in. Apehanger Bar for Springers: Manufacturer part # 300341 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A., , 1" Diameter Clamping Width: 6-3/4 in., Inside Width of Knurling/Outside: 4-/16 in. / 5-7/16 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300341
2 on hand
More Info/Options for Drag Specialties Buffalo 9 1/2 in. Apehanger Bar for Springers 300341
8 1 1/2
|
|
|
|
$213.95
Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar 300452
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59138
Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300452 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; work with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). T-Bars have 3-1/2 in. center-to-center mount holes. Made in the U.S.A... , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883/1200 models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300452
2 on hand
More Info/Options for Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar 300452
8 1 1/2
|
|
