59 50

$114.95 Thor 50/50 Attack Boots 34100479
Manufacturer: Thor
Dennis Kirk Part #: 341080910
Thor 50/50 Attack Boots: Manufacturer part # 34100479 - The perfect blend of athletic shoe comfort and fit with the rugged durability of a full-sized MX boot. The lightest boot on the market, weighing in at just 27 oz.. Made of genuine split-grain leather featuring a lightweight injection molded outsole with aggressive lug pattern. Reinforced and padded medial area for comfort. Contoured gaiter provides increased mobility and comfort. Boots also feature adjustable positive-lock aluminum buckles, integrated toe cap/shift protector and a plastic shank insert for footpeg support.. 34100479
6 on hand

More Info/Options for Thor 50/50 Attack Boots 34100479

59 50

$108.99 Warn Synthetic 50 ft. Replacement Rope 72128
Manufacturer: Warn
Dennis Kirk Part #: 515728
Warn Synthetic 50 ft. Replacement Rope: Manufacturer part # 72128 - Synthetic replacement rope for use with Warn 2.5CI, 3.0CI, Series winches. Includes synthetic rope, rock guard sleeve and roller fairlead. 3/32 in. x 50 ft. 3,000 pound weight rating. Aluminum hub required. Swaged loop end.. 72128
7 on hand

More Info/Options for Warn Synthetic 50 ft. Replacement Rope 72128

59 50

$28.95 50 in. Moose Utility Blade Wear Bar p512384
Manufacturer: Moose
Dennis Kirk Part #: 512384
50 in. Moose Utility Blade Wear Bar: Manufacturer part # p512384 - Available in 3 in. x 50 in. designed for Moose Utility and Cycle Country plows. 3 in. width provides additional wear. Wear bars are reversible for longer life.. p512384
More than 10 on hand

More Info/Options for 50 in. Moose Utility Blade Wear Bar p512384

59 50

$71.95 Moose Synthetic Winch 50 Ft. Cable p516258
Manufacturer: Moose
Dennis Kirk Part #: 516258
Moose Synthetic Winch 50 Ft. Cable: Manufacturer part # p516258 - Reduce weight and eliminate wore slivers. 3/16 in. x 50 ft. synthetic winch cable features a soft eyelet on the working end for easier threading through snatch blocks. This is designed with a 4000 lb working load, are for ATV use only and meet ATV competitioin and club specificatations when used with screw pin shackle.. p516258
7 on hand

More Info/Options for Moose Synthetic Winch 50 Ft. Cable p516258

59 50

$9.99 Stop & Go Tubeless Tire Repair Plugs (50 pk) 3075
Manufacturer: Stop & Go
Dennis Kirk Part #: 28473
Stop & Go Tubeless Tire Repair Plugs (50 pk): Manufacturer part # 3075 - Repair plugs sold in 50-pk. Replacement for- 28472.. 3075
9 on hand

More Info/Options for Stop & Go Tubeless Tire Repair Plugs (50 pk) 3075

59 50

$49.99 Klotz R-50 Synthetic Racing Lubricant KL105
Manufacturer: Klotz
Dennis Kirk Part #: 301183
Klotz R-50 Synthetic Racing Lubricant: Manufacturer part # KL105 - Formulated to protect competition engines from the demands of racing. Combines the wear protection of bean oil with the clean burn of synthetics. Track and dyno tested. Sold in 16 oz. bottles and one gallon size. Recommended for pre-mix only at 32-50:1 ratios.. KL105
8 on hand

More Info/Options for Klotz R-50 Synthetic Racing Lubricant KL105

59 50

$7.99 Klotz R-50 Synthetic Racing Lubricant KL102
Manufacturer: Klotz
Dennis Kirk Part #: 301182
Klotz R-50 Synthetic Racing Lubricant: Manufacturer part # KL102 - Formulated to protect cometition engines from the demands of racing. Combines the wear protection of bean oil with the clean burn of synthetics. Track and dyno tested. Sold in 16 oz. bottles and one gallon size. Recommended for pre-mix only at 32-50:1 ratios.. KL102
More than 10 on hand

More Info/Options for Klotz R-50 Synthetic Racing Lubricant KL102

59 50

$61.95 Drag Specialties Universal 50 ft. Brake Line 1740-0002
Manufacturer: Drag Specialties
Dennis Kirk Part #: 198485
Drag Specialties Universal 50 ft. Brake Line: Manufacturer part # 1740-0002 - Universal, black 3/16in. o.d. nylon brake lines; construction. Provides flexibility and builder control Fittings are made from steel, not brass. Ideal for custom fabrication. Line and fittings also work well for custom hydraulic clutch applications. Chrome fittings are compression-type with concave design. Line and fittings sold separately. For off-road and show use only; not DOT certified. Made in the U.S.A., , For Use with Fitting Part No.'s 1/8" male NPT straight master cylinder/caliper - 271248 1/8" male NPT 90° master cylinder/caliper - 271249 3/8"-24 male straight master cylinder/caliper - 271250 7/16"-24 male straight master cylinder/caliper - 271251 AN #3 adapter (allows use of any #3 male fitting) - 271252 3/16"-3/16" union - 271253 Replacement ferrules(ea.) - 271254 3/8"/10mm, straight banjo fitting - 271541 3/8"/10mm, 35° banjo fitting - 271542 3/8"/10mm, 90° banjo fitting - 271543 7/16", straight banjo fitting - 271544 7/16", 35° banjo fitting - 271545 7/16", 90° banjo fitting - 271546, , Note: 04-09 XL models use metric 10mm x 1.25 and 12mm x 1.50 banjo bolts, washers and fittings All Big Twins (exc FLHR, FLHT, FLHX, FLTR 08-09 and pre-2004 XL models use standard 3/8" and 7/16" banjo bolts, washers and fittings Fittings and washers listed as 3/8"/10mm can be used in either application. 1740-0002
1 on hand

More Info/Options for Drag Specialties Universal 50 ft. Brake Line 1740-0002

59 50

$5.99 Parts Unlimited 50/15W 12 Volts High-Output Halogen Taillight Bulb H1157
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 22274
Parts Unlimited 50/15W 12 Volts High-Output Halogen Taillight Bulb: Manufacturer part # H1157 - Dennis Kirk has a huge stock of top-quality, standard replacement bulbs for most 1973 and newer motorcycles. We also have quartz halogen-type bulbs which give two times the candlepower of regular bulbs and focus the light further ahead for a long, wider and safer field of view when riding at night. Whether you need sealed beam, replacement bulb or a taillight, stoplight, speedometer or tachometer bulb, DENNIS KIRK has it at a discount price. Replaces stock 1157 bulbs. Length of 1 7/8 in... H1157
More than 10 on hand

More Info/Options for Parts Unlimited 50/15W 12 Volts High-Output Halogen Taillight Bulb H1157

59 50

$85.99 Joker Machine Graphics Kit 50-110
Manufacturer: Joker Machine
Dennis Kirk Part #: 527417
Joker Machine Graphics Kit: Manufacturer part # 50-110 - For the Joker race look. Includes graphics for all tank panels, fenders, and fork legs.. 50-110
1 on hand

More Info/Options for Joker Machine Graphics Kit 50-110

59 50

$30.99 Parts Unlimited Tunnel Wear Strip-1 in. High x 1 in. Wide x 50 5/8 in. Long 550-008
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 0697
Parts Unlimited Tunnel Wear Strip-1 in. High x 1 in. Wide x 50 5/8 in. Long: Manufacturer part # 550-008 - Part No. 06-97 is constructed from extruded aluminum and has six 13/64 in. mounting holes. SKS and longtrack models (over 133 in.) require 3. Use rivet Part No. 27-53. Sold each.. 550-008
More than 10 on hand

More Info/Options for Parts Unlimited Tunnel Wear Strip-1 in. High x 1 in. Wide x 50 5/8 in. Long 550-008

59 50

$25.99 Parts Unlimited Tunnel Wear Strip-3/4 in. high x 1 in. Wide x 50 5/8 in. Long 550-007
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 0601
Parts Unlimited Tunnel Wear Strip-3/4 in. high x 1 in. Wide x 50 5/8 in. Long: Manufacturer part # 550-007 - Part No. 06-01 is constructed from extruded aluminum and has six 13/64 in. mounting holes. Use rivet Part No. 27-50. SKS and lontrack models (over 133 in.) require three. Sold each.. 550-007
More than 10 on hand

More Info/Options for Parts Unlimited Tunnel Wear Strip-3/4 in. high x 1 in. Wide x 50 5/8 in. Long 550-007

59 50

59 50