$144.95Moose Sportsman Cover C809
Manufacturer: Moose
Dennis Kirk Part #: 560337
Moose Sportsman Cover: Manufacturer part # C809 - The cover of choice for the outdoors enthusiast. Constructed of 430 denier nylon with urethane backing, it is weather-resistant and environmentally safe. Full coverage for your ATV, including the tires, to protect your machine from the elements. Available in woodland camouflage; fits most single passenger machines without a rear box/bed. Not trailerable.. C809 1 on hand
CLEARANCE!
Was: $399.95
Now: $99.99
Drag Specialties .500 in. Offset Inner Primary 210131LBX
Manufacturer: Drag Specialties
Dennis Kirk Part #: H49088
Drag Specialties .500 in. Offset Inner Primary: Manufacturer part # 210131LBX - Does your custom project include a wide tire or wide frame?. These primaries are available in offsets ranging from .50 in. to 1.000 in.. Reinforcing webs for added strength. Chrome-plated finish. Uses 94-02 primary components (sold separately).. 210131LBX 3 on hand
$305.99Sno-Stuff TCS Ski Bottoms 570-500
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10773
Sno-Stuff TCS Ski Bottoms: Manufacturer part # 570-500 - Designed for lightweight performance and a straight, safe ride. Excellent for all-around riders on a variety of snow conditions. Made for super-tough UHMW (Ultra-High Molecular Weight) molded plastic. Order one pair of skis in your choice of colors and the custom-fit mount kit for your machine. Mount kits sold separately. Steel wear rods included. Sold in Pairs. Mount kit is sold separately, , Part numbers for replacement wear bars: , Standard steel - 031421 (requires 4 total), 4" Carbide - 031422 (requires 1 set per ski), 6" Carbide - 031707 (requires 1 set per ski), , Wear rods are included, they must be purchased separately, 4" carbide 03-1422 (PR)- Must order 2 pair, 6" carbide 03-1707 (PR)Must order 2 pair, 8" carbide 03-1421 (EA)Must order 4 rods. 570-500 More than 10 on hand
$281.99Sno-Stuff X-Calibar Ski Bottoms - Black 575-500
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 105917
Sno-Stuff X-Calibar Ski Bottoms - Black: Manufacturer part # 575-500 - This ski is the cutting edge of performance, features and style. Made of UHMW PE material. Ski design is a 1 in. steep and deep keel. Parabolic design and opposing curve fins front and back make this a non-traditional single-runner ski. This results in excellent corner-carving ability and high levels of traction. Darting effect is greatly reduced by the bell nose keel that keeps the center carbide cutting a fresh path. 6.375 in. wide at the tip of the ski. Ski blades sold in pairs; include standard wear bars (installed) and black ski loop. Mount kit must be ordered separately. Replacement wear bars sold separately. , , NOTE:, Arctic Cat models with OEM blow-molded skis require two Arctic Cat number 0603-036 rubber dampeners to install, , Wear rods are included, they must be purchased separately, 4" carbide 03-2038 (PR), 6" carbide 032039 (PR), 8" carbide 03-2040 (PR). DIMENISIONS: Bottom Length: 42-3/4in.. Top Length: 40-3/4in.. Width Across Top: 6-3/8in.. MOUNTING HOLES CENTER DISTANCE FROM: Front to 1st: 16-5/8in.. 1st to 2nd: 3-1/8in.. 2nd to 3rd: 9-1/2in.. 3rd to end: 11-1/2in... 575-500 2 on hand
$71.99Nelson-Rigg Defender 500 Cover - XX-Large p560430
Manufacturer: Nelson-Rigg
Dennis Kirk Part #: 560430XXL
Nelson-Rigg Defender 500 Cover - XX-Large: Manufacturer part # p560430 - 100 percent waterproof Constructed from a lighter weight top quality Tri-Max® treated polyester. UVEX-treated to block out harmful UV rays that are the leading cause of color fading. Double-stitched, electrically heat-sealed seams and heat shield lower panels; soft windshield panel protector. The Perma-Venting® system prevents condensation build-up and permits constant air circulation. Elastic bottom with 1 in. grommets fits snugly at center and front wheel. Includes zipper storage bag with web strap handles. , , NOTE: Not intended for trailering. p560430 2 on hand
$51.99Arlen Ness Brake Pedal Cover 03-500
Manufacturer: Arlen Ness
Dennis Kirk Part #: H19078
Arlen Ness Brake Pedal Cover: Manufacturer part # 03-500 - Replaces the stock rubber pad on FLT/FLHT 84-07 and FLST L87-07 models. Features chrome billet cover with rubber inserts.. 03-500 1 on hand
$124.99Danny Gray Seats Narrow Detachable Pillion Pad 500
Manufacturer: Danny Gray Seats
Dennis Kirk Part #: H45346
Danny Gray Seats Narrow Detachable Pillion Pad: Manufacturer part # 500 - Perfect complement to the Danny Gray solo seats. Detachable pillion pads feature a smooth leather cover and are available in three sizes - H45346, H45347, H45348. Install easily with six suction cups. , NOTE: , For cosmetic use only; not for passenger use. Fender must be clean and dry for proper installation, , Dimensions: , Length: 11 in., Width: 7 in.. 500 2 on hand
$284.99Independent Cycle Inc. Standard Pullback Handlebar 500-0500
Manufacturer: Independent Cycle Inc.
Dennis Kirk Part #: 594797
Independent Cycle Inc. Standard Pullback Handlebar: Manufacturer part # 500-0500 - Made from thick .157 wall tubing thats TIG welded. Come in a smooth design with built-in riser included. Standard style measures 30 in. W, while Wide style measures 34 in. W. Available in raw finish only. DIMENSIONS: Bar Diameter: 1 1/8 in. w/last 8 in. being 1 in. diameter. Riser Width: 3 1/2 in. Center to Center, with 1/2 in.-20 threads. NOTE: This bar is plain, not dimpled, dirlled, or knurled. Handlebars are 1-1/8 in diameter, with last 8 ins on each end reduced to 1 in for the controls. , , NOTE: Will not fit Touring 08-09 models. 500-0500 1 on hand
$35.95Drag Specialties Black Shrink Tubing .500 in. to .250 in. DRTT26325
Manufacturer: Drag Specialties
Dennis Kirk Part #: 211910
Drag Specialties Black Shrink Tubing .500 in. to .250 in.: Manufacturer part # DRTT26325 - Available in 25 feet length. Made in the U.S.A.. Also available in 5' - H49906.. DRTT26325 1 on hand
$104.95Moose ATV Swingarm Skid Plate 500
Manufacturer: Moose
Dennis Kirk Part #: 512874
Moose ATV Swingarm Skid Plate: Manufacturer part # 500 - Made of tough 3/16 in. aluminum alloy plate. Swingarm skid plates protect sprocket, swingarm and brake rotor from damage. High-impact areas made from 1/4 in. extruded aluminum. Feature a clear anodized finish and an integrated, long-wearing chain guide where applicable. Custom fit for each model.. 500 1 on hand
$125.99Arlen Ness LED Jet-Eye Taillight 20-500
Manufacturer: Arlen Ness
Dennis Kirk Part #: H21058
Arlen Ness LED Jet-Eye Taillight: Manufacturer part # 20-500 - New stretched cat eye design. Features chrome-plated die-cast housing and super-bright LED bulbs. Available as a complete kit or individual pieces: Assembly-H21059, Turn signals only-H21064, Replacement LED board-H21066. Sold as Each.. 20-500 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
