$78.99Kuryakyn Universal Small Halogen Silver Bullet Lights w/5/16 in.-18 Mounting Bolt 2303
Manufacturer: Kuryakyn
Dennis Kirk Part #: H22035
Kuryakyn Universal Small Halogen Silver Bullet Lights w/5/16 in.-18 Mounting Bolt: Manufacturer part # 2303 - Universal Silver Bullets can be installed just about anywhere. They include minimal mounting hardware, but with a little ingenuity, they will fill the bill in applications we don't cover with complete kits. Our P-Clamps and new Fork Clamps work great to attach Silver Bullets to engine guards, frame tubes, or fork tubes. Halogen Silver BulletsA Kuryakyn exclusive, Halogen Silver Bullets are assembled with high shock, heavy duty single filament quartz halogen bulbs. Includes clear lenses only. , , Note: There is no need to use a Load Equalizer with Halogen Silver Bullet kits, , Important Info on Silver Bullets:, Halogen Silver Bullets have a single power wire and ground through their mount. Do not wire Halogen Silver Bullets with Red Lenses to operate as running lights unless using our Run-Turn-Brake Controller, P/N 21179 or H40-028 for use on Softails 96-06, Dynas, Dressers and Road Kings 97-06 and Sportsters 97-03. Excessive Heat will result in cracked lenses, , Note: , Small Silver Bullets measure 2-1/2 in. x 1-5/8 in.. , , Light Diameter 1 5/8". , Light Depth: 2 7/8". , Light Height: 2 1/4". , Replacement Bulb: P/N H22-058. , Not DOT Approved. 2303 4 on hand
$78.99Kuryakyn Universal Large Halogen Silver Bullet Lights w/5/16 in.-18 Mounting Bolt 2319
Manufacturer: Kuryakyn
Dennis Kirk Part #: H22036
Kuryakyn Universal Large Halogen Silver Bullet Lights w/5/16 in.-18 Mounting Bolt: Manufacturer part # 2319 - Universal Silver Bullets can be installed just about anywhere. They include minimal mounting hardware, but with a little ingenuity, they will fill the bill in applications we don't cover with complete kits. Our P-Clamps and new Fork Clamps work great to attach Silver Bullets to engine guards, frame tubes, or fork tubes. Halogen Silver BulletsA Kuryakyn exclusive, Halogen Silver Bullets are assembled with high shock, heavy duty single filament quartz halogen bulbs. Halogen Silver Bullet kits for the rear of the bike include red and amber lenses. , , Note: , There is no need to use a Load Equalizer with Halogen Silver Bullet kits, , Important Info on Silver Bullets:, Halogen Silver Bullets have a single power wire and ground through their mount. Do not wire Halogen Silver Bullets with Red Lenses to operate as running lights unless using our Run-Turn-Brake Controller, P/N 21179 or H40-028 for use on Softails 96-06, Dynas, Dressers and Road Kings 97-06 and Sportsters 97-03. Excessive Heat will result in cracked lenses, , Large Silver Bullets measure 3 1/4 in. x 2 5/16 in.. 2319 2 on hand
$94.99LED Vizor Lights - Small w/Amber LED V5801A
Manufacturer: Vizor Lights
Dennis Kirk Part #: 212014
LED Vizor Lights - Small w/Amber LED: Manufacturer part # V5801A - Chrome-plated, die-cast aluminum body. LED Vizor lights available with amber or red LEDs; LED Dual Function Converter allows LED Vizor lights to work as a dual element. For a clean appearance, wiring is routed through the 5/16"-24 x 1" mounting bolt. To allow a variety of mounting options, visors adjust in 90 (degrees) increments. Measure 2 7/8" L; available in small (1 3/4" dia.) or large (2 1/4" dia.). Sold in pairs. Replacement Parts: Hollow 5/16 in.-24 mounting bolt: part number: 212361 LED amber retrofit: part number: 212018 LED dual function converter: part number 212026. V5801A 6 on hand
$3.99Vizor Lights Hollow 5/16 in. - 18 Mounting Bolt 20400298
Manufacturer: Vizor Lights
Dennis Kirk Part #: 212361
Vizor Lights Hollow 5/16 in. - 18 Mounting Bolt: Manufacturer part # 20400298 - Replacement bolt is used with Vizor Lights part numbers 210359, 211446, 212014, 212015, 212016 and 212017. , , Note: Bolt threads are 5/16 in.-18, not 24. 18 is standard on Harley-Davidsons and most custom lights., , This bolt is hollow, not rigid.. 20400298 Expected Soon
$70.99Vizor Lights Vizor Bullet Driving Light V5835
Manufacturer: Vizor Lights
Dennis Kirk Part #: 210754
Vizor Lights Vizor Bullet Driving Light: Manufacturer part # V5835 - High quality, chrome-plated die-cast aluminum housing. Features a 35-watt single element halogen bulb for superior illumination. Visors adjust at 90 degrees increments (too a 12 o'clock position) for a variety of mounting options. Measures: LENS DIAMETER: 1 1/4 in. OUTSIDE DIAMETER: 1 11/16 in. DEPTH: 2 3/4 in. HEIGHT: 2 1/4 in.. Replacement Parts: 35W bulb: part number 22590 Clear lens: part number 212012 Optional 5/16 in.-24 swivel mounting bolt: part number 212360. V5835 Expected Soon
$78.99Hitech Double Row LED Flush Mount Light 2 1/2 in. L x 5/8 in. W PSC120RP
Manufacturer: Hitech
Dennis Kirk Part #: H21462
Hitech Double Row LED Flush Mount Light 2 1/2 in. L x 5/8 in. W: Manufacturer part # PSC120RP - Red prismatic lens. For ease of custom installation, lenses are not attached to lights. Light measurements are based on the size of the lens; light housings are larger. Like other LEDs, these lights are brighter and last longer than standard lights. Not DOT approved; recommended for show or off-road use only. Made in the U.S.A... PSC120RP 1 on hand
$85.99Hitech Double Row LED Flush Mount Light 5 3/16 in. L x 5/8 in. W PSC104RP
Manufacturer: Hitech
Dennis Kirk Part #: H21448
Hitech Double Row LED Flush Mount Light 5 3/16 in. L x 5/8 in. W: Manufacturer part # PSC104RP - Red prismatic lens. For ease of custom installation, lenses are not attached to lights. Light measurements are based on the size of the lens; light housings are larger. Like other LEDs, these lights are brighter and last longer than standard lights. Not DOT approved; recommended for show or off-road use only. Made in the U.S.A... PSC104RP 1 on hand
$93.99Hitech Double Row LED Flush Mount Light 6 3/8 in. L x 5/8 in. W PSC103RP
Manufacturer: Hitech
Dennis Kirk Part #: H21458
Hitech Double Row LED Flush Mount Light 6 3/8 in. L x 5/8 in. W: Manufacturer part # PSC103RP - Red prismatic lens. For ease of custom installation, lenses are not attached to lights. Light measurements are based on the size of the lens; light housings are larger. Like other LEDs, these lights are brighter and last longer than standard lights. Not DOT approved; recommended for show or off-road use only. Made in the U.S.A... PSC103RP 2 on hand
$88.99Hitech Double Row LED Flush Mount Light 3 13/16 in. L x 5/8 in. W PSC121RP
Manufacturer: Hitech
Dennis Kirk Part #: H21454
Hitech Double Row LED Flush Mount Light 3 13/16 in. L x 5/8 in. W: Manufacturer part # PSC121RP - Red prismatic lens. For ease of custom installation, lenses are not attached to lights. Light measurements are based on the size of the lens; light housings are larger. Like other LEDs, these lights are brighter and last longer than standard lights. Not DOT approved; recommended for show or off-road use only. Made in the U.S.A... PSC121RP 1 on hand
$62.99Hitech Double Row LED Flush Mount Lights-1 1/4 in. Long x 5/8 in. Wide PSC020RP
Manufacturer: Hitech
Dennis Kirk Part #: 22524
Hitech Double Row LED Flush Mount Lights-1 1/4 in. Long x 5/8 in. Wide: Manufacturer part # PSC020RP - Available with red prismatic lenses in a variety of styles. For ease of custom installation, lenses are not attached to lights. Light measurements are based on the size of the lens; light housings are larger. Like other LEDs, these lights are brighter and last longer than standard lights. Not DOT approved; recommended for show or off-road use only. Made in the U.S.A... PSC020RP 1 on hand
$57.99Diamond Base for Vizor Lights LSM0605
Manufacturer: Vizor Lights
Dennis Kirk Part #: H50516
Diamond Base for Vizor Lights: Manufacturer part # LSM0605 - For part number 21-0359, 211446, 212014, 212015, 212016, 212017.. LSM0605 1 on hand
$94.99LED Vizor Lights - Small w/Red LED V5801R
Manufacturer: Vizor Lights
Dennis Kirk Part #: 212015
LED Vizor Lights - Small w/Red LED: Manufacturer part # V5801R - Chrome-plated, die-cast aluminum body. LED Vizor lights available with amber or red LEDs; LED Dual Function Converter allows LED Vizor lights to work as a dual element. For a clean appearance, wiring is routed through the 5/16"-24 x 1" mounting bolt. To allow a variety of mounting options, visors adjust in 90 (degrees) increments. Measure 2 7/8" L; available in small (1 3/4" dia.) or large (2 1/4" dia.). Sold in pairs. Replacement Parts: Hollow 5/16 in.-24 mounting bolt: part number: 212361 LED red retrofit: part number: 212019 LED dual function converter: part number 212026. V5801R Expected Soon
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
