450 Rhino

$269.95 Moose Light Bar for Yamaha Rhino 1420
Manufacturer: Moose
Dennis Kirk Part #: 515629
Moose Light Bar for Yamaha Rhino: Manufacturer part # 1420 - Add function and great looks to your Rhino with this durable, foam-filled light bar. Features stainless steel mounting plates and cover. Accommodates a wide range of lamps. Mounts with or without the Slimline or sunshade roof. Lights are sold separately. Shown mounted on Slimline roof. INCLUDED ITEMS: One light bar. Four stainless steel light mounting plates. Four Adhesive back closed cell sponge gaskets. Eight 1/4 in.-20 x 1.25 in. large stainless steel button head bolts. Eight 1/4 in. stainless steel flat washers. Eight 1/4 in. stainless steel lock washers. Eight 1/4 in.-20 stainless steel nylock nuts. Four 5/16 in.-18 x 2.00 in. long stainless steel hex head bolts. Four 5/16 in.-18 x 3.50 in. long stainless stee hex head bolts. Four 1 in. outside diameter stainless steel fender washers. Four 5/16 in. stainless steel flat washers. Four 5/16 in. stainless steel lock washers. Four 5/16 in.-18 stainless steel nylock nuts. Four mounting brackets. One 1/2 in. black grommet. One instruction sheet.. 1420
1 on hand

More Info/Options for Moose Light Bar for Yamaha Rhino 1420

450 Rhino

$127.95 Moose Rhino Rhinotek Seat Cover p454825
Manufacturer: Moose
Dennis Kirk Part #: 454824
Moose Rhino Rhinotek Seat Cover: Manufacturer part # p454825 - Made from Rhinotek waterproof non-skid material. Provides comfort and waterproof barrier between the rider and seat. Conforms to the seat for a tight custom fit. Guards the seat from damage. Easy to install without tools. Drain holes have been installed to help liquids drain. Includes a pair of seat covers and headrest covers.. p454825
1 on hand

More Info/Options for Moose Rhino Rhinotek Seat Cover p454825

450 Rhino

$103.99 Roetin Extreme X-PRT Carbide Wear Rods XPRT-KT-450
Manufacturer: Roetin
Dennis Kirk Part #: 031613
Roetin Extreme X-PRT Carbide Wear Rods: Manufacturer part # XPRT-KT-450 - Nine inches of 60º carbide on 1/2 in. bar. Four carbide wear pads. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing., , NOTE: , Kits for Ski-Doo Double Runner Precision Skis, contain four runners; two with 4 in. of 90º carbide and two with 6 in. of 90º carbide. For best performance intall longer runner to the outside of ski., , NOTE: , Also Fits Ski-Doo 02-03 models with Precision Skis.. XPRT-KT-450
More than 10 on hand

More Info/Options for Roetin Extreme X-PRT Carbide Wear Rods XPRT-KT-450

450 Rhino

$39.99 Kuryakyn Running Board Extenders 450
Manufacturer: Kuryakyn
Dennis Kirk Part #: 491953
Kuryakyn Running Board Extenders: Manufacturer part # 450 - Moves stock driver boards outward 3/4 in.. Helps alleviate heat buildup by allowing engine heat to escape between your leg and the bike. Eliminates need to hug the gas tank tight with your thighs to get your foot fully on the floorboard. All bolts are stainless steel, spacers are powder-coated black for durability. Compatible with all fairing lowers.. 450
More than 10 on hand

More Info/Options for Kuryakyn Running Board Extenders 450

450 Rhino

$95.99 Arlen Ness Twister Footpegs 06-450
Manufacturer: Arlen Ness
Dennis Kirk Part #: H501806
Arlen Ness Twister Footpegs: Manufacturer part # 06-450 - High-tech billet aluminum designs. Available in chrome-plated finish. All pegs are male mount. Sold in a pair. Made in the U.S.A.. For twister shift peg - H501807.. 06-450
1 on hand

More Info/Options for Arlen Ness Twister Footpegs 06-450

450 Rhino

$103.99 Nelson-Rigg RiggPak 450 Overnighter CTB450
Manufacturer: Nelson-Rigg
Dennis Kirk Part #: 504130
Nelson-Rigg RiggPak 450 Overnighter: Manufacturer part # CTB450 - Perfect design for the traveler/commuter in need of a backpack that maximizes space and reduces bulk on and off the bike. An integrated pocket hides the padded backpack strapes until youre ready to hop off your bike and turn the RiggPak" into a backpack. Four spacious side pockets with storm welts to store items you need to reach quickly. Durable carrying handle. Includes compact, heavy-duty combination lock with 1000 different combinations. Spacious office organizer keeps tack of all personals; features an envelope-sized pocket on the back for additional easy-access storage. Extra-large, heavy-duty zippers are easy to open and close, with or without gloves. For additional internal rain liner order 50-4125. DIMENSIONS: 18 in. H x 13 in. W x 6 in. D Unexpanded and 18 in. H x 13 in. W x 8 in. D Expanded.. CTB450
2 on hand

More Info/Options for Nelson-Rigg RiggPak 450 Overnighter CTB450

450 Rhino

$76.99 Sno-Stuff Clear Windshield 450-624-01
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 24380
Sno-Stuff Clear Windshield: Manufacturer part # 450-624-01 - High-quality Sno Stuff windshields match the originals exactly for a perfect fit. Most are made of tough, .075 in. thick cold-weather butyrate material. Certain applications are .100 in. thick butyrate and some are Lexan polycarbonate for extra strength (These will be noted). Mounting screws, O-rings and grommets available separately. Note: Uses large O-rings for mounting Note: All windshields are protected with plastic shrinkwrap for shipping. Before removing, be certain you are going to keep it. Windshields with plastic wrap removed are not returnable. 450-624-01
5 on hand

More Info/Options for Sno-Stuff Clear Windshield 450-624-01

450 Rhino

$69.99 Sno-Stuff Smoke Windshield 450-464-02
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 24366
Sno-Stuff Smoke Windshield: Manufacturer part # 450-464-02 - High-quality Sno Stuff windshields match the originals exactly for a perfect fit. Most are made of tough, .075 in. thick cold-weather butyrate material. Certain applications are .100 in. thick butyrate and some are Lexan polycarbonate for extra strength (These will be noted). Mounting screws, O-rings and grommets available separately. Note: Uses large O-rings for mounting Note: All windshields are protected with plastic shrinkwrap for shipping. Before removing, be certain you are going to keep it. Windshields with plastic wrap removed are not returnable. 450-464-02
1 on hand

More Info/Options for Sno-Stuff Smoke Windshield 450-464-02

450 Rhino

$70.99 Sno-Stuff Gradient Graphics Style Windshield 450-164-03
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 24434
Sno-Stuff Gradient Graphics Style Windshield: Manufacturer part # 450-164-03 - Sno Stuff windshields match originals exactly. Tough, cold-resistant .075 in. thick butyrate material. Precision cut and formed with permanently attached trim molding. Mounting O-rings, dart screws and grommets available separately. Note: All windshields are protected with plastic shrinkwrap for shipping. Before removing, be certain that you are going to keep it. Windshields with plastic wrap removed are not returnable. 450-164-03
5 on hand

More Info/Options for Sno-Stuff Gradient Graphics Style Windshield 450-164-03

450 Rhino

$71.99 Sno-Stuff Gradient Graphics Type Windshield 450-483-03
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 248111
Sno-Stuff Gradient Graphics Type Windshield: Manufacturer part # 450-483-03 - Tough, cold-resistant .075 in. thick butyrate material. Precision cut and formed with permanently attached trim molding. Graphics versions are gradient silk-screened to solid black at their bases to cover mounting hardware and unsightly dirt (black fades into a semi-opaque dot pattern before completely disappearing as they go up the windshield for an unobstructed view). Mounting O-rings, dart screws and grommets available separately. All windshields are protected with plastic shrink-wrap for shipping. Before removing, be certain that you are going to keep it. Windshields with plastic wrap removed are not returnable NOTE: Fits REV Chassis fixed windshield without handguards.. 450-483-03
Expected Soon

More Info/Options for Sno-Stuff Gradient Graphics Type Windshield 450-483-03

450 Rhino

$60.99 Sno-Stuff Clear Windshield 450-617
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 2477
Sno-Stuff Clear Windshield: Manufacturer part # 450-617 - High-quality Sno Stuff windshields match the originals exactly for a perfect fit. Most are made of tough, .075 in. thick cold-weather butyrate material. Certain applications are .100 in. thick butyrate and some are Lexan polycarbonate for extra strength (These will be noted). Mounting screws, O-rings and grommets available separately. Note: All windshields are protected with plastic shrinkwrap for shipping. Before removing, be certain you are going to keep it. Windshields with plastic wrap removed are not returnable. 450-617
1 on hand

More Info/Options for Sno-Stuff Clear Windshield 450-617

450 Rhino

$65.99 Sno-Stuff Low-Cut Windshield 450-182-50
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 248104
Sno-Stuff Low-Cut Windshield: Manufacturer part # 450-182-50 - High-gloss painted and bright transparent windshields give your snowmobile the latest racy look. Black, white and yellow windshields are high gloss and opaque; the rest are transparent or smoke. Low-cut racing height for better aerodynamics. Flared windshields are designed to keep hands and upper body warmer. Tough, .075 in. thick butyrate material with permanently bonded outer-edge trim. Made to withstand subzero temperatures. Mounting O-rings, dart screws and grommets available separately. Note: All windshields are protected with plastic shrink-wrap for shipping. Before removing, be certain that you are going to keep it. Windshields with plastic-wrap removed are not returnable. 450-182-50
1 on hand

More Info/Options for Sno-Stuff Low-Cut Windshield 450-182-50

450 Rhino

450 Rhino