40 Oz

$25.95 Moose Muffler Packing - 17.6 oz bag RTTEX500G
Manufacturer: Moose
Dennis Kirk Part #: 432421
Moose Muffler Packing - 17.6 oz bag: Manufacturer part # RTTEX500G - Packing stays intact longer in the muffler because of long, continuous strands of thick silencing material. Your machine stays quieter longer than when you use conventional glass packing.. RTTEX500G
9 on hand

More Info/Options for Moose Muffler Packing - 17.6 oz bag RTTEX500G

40 Oz

$38.99 Warn 4.0 Neoprene Winch Cover Kit 71975
Manufacturer: Warn
Dennis Kirk Part #: 515767
Warn 4.0 Neoprene Winch Cover Kit: Manufacturer part # 71975 - Protects 4.0 winch from the elements. Includes neoprene cover and 1 in. x 8 in. nylon strap. Inside mesh pocket stores the strap when not in use. Winch sold separately.. 71975
1 on hand

More Info/Options for Warn 4.0 Neoprene Winch Cover Kit 71975

40 Oz

$27.99 Kimpex OEM-Style CDI Box 01-143-40
Manufacturer: Kimpex
Dennis Kirk Part #: 42414
Kimpex OEM-Style CDI Box: Manufacturer part # 01-143-40 - Pre-tested at factory to match OEM specifications. All boxes mount in same location with original hardware. Adapter plate included for some models with four-bolt mounting. NOTE: There is no warranty on electrical parts. Our CDI boxes are tested twice to ensure quality before they are packaged. Before installing a CDI box, check all ignition components and connections to ensure they are within tolerances. If some components are out of spec, they should be replaced as they can cause premature failure. We strive to give our customers the finest quality replacement ignition parts at competitive prices. Packages are skin-packed so all the components are visible before opening; and the part is not returnable after opening. CDI boxes must be replaced only by experienced mechanics with the proper test equipment and familiarity with the electronic ignition system being repaired. Improper replacement or replacement without first testing the rest of the ignition system may damage the new CDI box.. 01-143-40
More than 10 on hand

More Info/Options for Kimpex OEM-Style CDI Box 01-143-40

40 Oz

$50.99 Stud Boy Super Stock Carbide Wear Rods CAT-R2076-40
Manufacturer: Stud Boy
Dennis Kirk Part #: 031315
Stud Boy Super Stock Carbide Wear Rods: Manufacturer part # CAT-R2076-40 - Large 1/2" diameter host bar for long life and great handling. Front and rear carbide pads to increase durability. Has four inches of 90° control carbide. Great for sleds without studs or conservatively studded. Angle cut at rear of bar to ease trailer unloading. Easy installation. , Some models require drilling extra holes in skis to mount carbides.Dennis Kirk recommends removing any paint from the studs before use by wire brushing. , Fits those models with a big lug, or Aggressive Wave track.. CAT-R2076-40
3 on hand

More Info/Options for Stud Boy Super Stock Carbide Wear Rods CAT-R2076-40

40 Oz

$29.95 Scorpio Ignition Disabler and Anti-Highjack Kit for PART NOS. 40-6901, 40-6902 and 40-6903 RID-1
Manufacturer: Scorpio
Dennis Kirk Part #: 406905
Scorpio Ignition Disabler and Anti-Highjack Kit for PART NOS. 40-6901, 40-6902 and 40-6903: Manufacturer part # RID-1 - Prevents hijacking by disabling the ignition.. RID-1
3 on hand

More Info/Options for Scorpio Ignition Disabler and Anti-Highjack Kit for PART NOS. 40-6901, 40-6902 and 40-6903 RID-1

40 Oz

$55.99 The Glass Act Butler Passenger Drink Holder w/34 oz Mug BPS34
Manufacturer: The Glass Act
Dennis Kirk Part #: 499406
The Glass Act Butler Passenger Drink Holder w/34 oz Mug: Manufacturer part # BPS34 - Holds mug securely while still allowing easy removal. Adjusts to fit any mounting position and most motorcycles. Comes in 20 oz. - 499407 or 34 oz. sizes. Insulated Aladdin mug comes with drinking straw. Driver cup holder - H50881 or H50880 mounts to the left clutch lever mount. Includes all necessary mounting hardware. Made in the U.S.A... BPS34
2 on hand

More Info/Options for The Glass Act Butler Passenger Drink Holder w/34 oz Mug BPS34

40 Oz

$2.95 Drag Specialties No. 40 Pilot Jet for HD Keihin Carbs 20731
Manufacturer: Drag Specialties
Dennis Kirk Part #: H17600
Drag Specialties No. 40 Pilot Jet for HD Keihin Carbs: Manufacturer part # 20731 - For CV-style carbs. Sold each.. 20731
6 on hand

More Info/Options for Drag Specialties No. 40 Pilot Jet for HD Keihin Carbs 20731

40 Oz

$37.99 Joker Machine 1/2in. Chrome Breather Bolt Kit 02-40
Manufacturer: Joker Machine
Dennis Kirk Part #: 183177
Joker Machine 1/2in. Chrome Breather Bolt Kit: Manufacturer part # 02-40 - Button-head bolts fit most support brackets and breathers. Kit includes two 1/2in.-13 x 1 3/4in. bolts, four thick aluminum washers and four stainless steel washers. Made in the U.S.A... 02-40
1 on hand

More Info/Options for Joker Machine 1/2in. Chrome Breather Bolt Kit 02-40

40 Oz

$17.95 Moose Muffler Packing - 8.8 oz Bag RTSS200G
Manufacturer: Moose
Dennis Kirk Part #: 443513
Moose Muffler Packing - 8.8 oz Bag: Manufacturer part # RTSS200G - Packing stays intact longer in the muffler because of long, continuous strands of thick silencing material. Your machine stays quieter longer than when you use conventional glass packing.. RTSS200G
5 on hand

More Info/Options for Moose Muffler Packing - 8.8 oz Bag RTSS200G

40 Oz

$6.50 Drag Specialties 10W-40 Motorcycle Oil 36010044
Manufacturer: Drag Specialties
Dennis Kirk Part #: 304717
Drag Specialties 10W-40 Motorcycle Oil: Manufacturer part # 36010044 - Formulated for V-Twin engines when ambient temperature is between 10 F and 50 F. Gives engine outstanding protection during cold starting. Features special additives which provide excellent wear protection and durability while guarding against sludge buildup and oil breakdown. Meets all Harley-Davidson warranty performance criteria and does not void new vehicle warranties. Exceeds API CI-4/SL service rating. Available in a quart bottle.. 36010044
More than 10 on hand

More Info/Options for Drag Specialties 10W-40 Motorcycle Oil 36010044

40 Oz

$424.95 Hard Krome 3 1/2 in. Drag Double D Slip-Ons 40-4030
Manufacturer: Hard Krome
Dennis Kirk Part #: 446445
Hard Krome 3 1/2 in. Drag Double D Slip-Ons: Manufacturer part # 40-4030 - The first double wall 3 1/2 in. slip-on. Replace your stock mufflers and bolt on in minutes. Doublewall construction and slash cut rear pipe. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. , , Included Items: , (2) Slashcut Mufflers with Removable Baffles, (1) 12-3/ 4 in. Black Mounting Bracket, (1) T-Bolt Clamp, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, (4) 3/8 in. Square Nuts. NOTE: This has one double wall headpipe. Not for 2004-06 California versions of this motorcycle . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-4030
1 on hand

More Info/Options for Hard Krome 3 1/2 in. Drag Double D Slip-Ons 40-4030

40 Oz

$424.95 Hard Krome Double D Drag Slip-Ons 40-3350
Manufacturer: Hard Krome
Dennis Kirk Part #: 449385
Hard Krome Double D Drag Slip-Ons: Manufacturer part # 40-3350 - These slip-ons are the same diameter as your original head pipe, so they bolt on in minutes. Double wall construction, slash-cut rear pipe and 1 3/4 in. inside pipe diameter. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-3350
2 on hand

More Info/Options for Hard Krome Double D Drag Slip-Ons 40-3350

40 Oz

40 Oz