40 70

$159.95 Moose Steel Tri-Fold 70 in. Loading Ramp 06002
Manufacturer: Moose
Dennis Kirk Part #: 512668
Moose Steel Tri-Fold 70 in. Loading Ramp: Manufacturer part # 06002 - Standard ramp is 70 in. L x 43 in. W. Both ramps fold to 14 in. W.. 06002
1 on hand

More Info/Options for Moose Steel Tri-Fold 70 in. Loading Ramp 06002

40 70

$38.99 Warn 4.0 Neoprene Winch Cover Kit 71975
Manufacturer: Warn
Dennis Kirk Part #: 515767
Warn 4.0 Neoprene Winch Cover Kit: Manufacturer part # 71975 - Protects 4.0 winch from the elements. Includes neoprene cover and 1 in. x 8 in. nylon strap. Inside mesh pocket stores the strap when not in use. Winch sold separately.. 71975
1 on hand

More Info/Options for Warn 4.0 Neoprene Winch Cover Kit 71975

40 70

$114.99 Hot Toppers Starter Kit - 70 pieces HTD147
Manufacturer: Hot Toppers
Dennis Kirk Part #: 272127
Hot Toppers Starter Kit - 70 pieces: Manufacturer part # HTD147 - HOT TOPPERS® has answered the requests from both dealers & customers to provide complete kits that will fully detail their motorcycles. The complete kits have been updated to create a more inclusive kit, giving attention to detail in the special locations justlike the professionals. , NOTE: Covers engine/transmission and primary. HTD147
1 on hand

More Info/Options for Hot Toppers Starter Kit - 70 pieces HTD147

40 70

$27.99 Kimpex OEM-Style CDI Box 01-143-40
Manufacturer: Kimpex
Dennis Kirk Part #: 42414
Kimpex OEM-Style CDI Box: Manufacturer part # 01-143-40 - Pre-tested at factory to match OEM specifications. All boxes mount in same location with original hardware. Adapter plate included for some models with four-bolt mounting. NOTE: There is no warranty on electrical parts. Our CDI boxes are tested twice to ensure quality before they are packaged. Before installing a CDI box, check all ignition components and connections to ensure they are within tolerances. If some components are out of spec, they should be replaced as they can cause premature failure. We strive to give our customers the finest quality replacement ignition parts at competitive prices. Packages are skin-packed so all the components are visible before opening; and the part is not returnable after opening. CDI boxes must be replaced only by experienced mechanics with the proper test equipment and familiarity with the electronic ignition system being repaired. Improper replacement or replacement without first testing the rest of the ignition system may damage the new CDI box.. 01-143-40
More than 10 on hand

More Info/Options for Kimpex OEM-Style CDI Box 01-143-40

40 70

$31.99 Kimpex External Ignition Coil 01-143-70
Manufacturer: Kimpex
Dennis Kirk Part #: 200833
Kimpex External Ignition Coil: Manufacturer part # 01-143-70 - Dennis Kirk has a huge selection of coils to fit most popular snowmobile engines. All are made to OEM specifications and match the original equipment in appearance.. 01-143-70
More than 10 on hand

More Info/Options for Kimpex External Ignition Coil 01-143-70

40 70

$50.99 Stud Boy Super Stock Carbide Wear Rods CAT-R2076-40
Manufacturer: Stud Boy
Dennis Kirk Part #: 031315
Stud Boy Super Stock Carbide Wear Rods: Manufacturer part # CAT-R2076-40 - Large 1/2" diameter host bar for long life and great handling. Front and rear carbide pads to increase durability. Has four inches of 90° control carbide. Great for sleds without studs or conservatively studded. Angle cut at rear of bar to ease trailer unloading. Easy installation. , Some models require drilling extra holes in skis to mount carbides.Dennis Kirk recommends removing any paint from the studs before use by wire brushing. , Fits those models with a big lug, or Aggressive Wave track.. CAT-R2076-40
3 on hand

More Info/Options for Stud Boy Super Stock Carbide Wear Rods CAT-R2076-40

40 70

$249.95 Drag Specialties Clutch Shell For Big Twin '70-E'84 w/Chain Drive DS196181
Manufacturer: Drag Specialties
Dennis Kirk Part #: H380627
Drag Specialties Clutch Shell For Big Twin '70-E'84 w/Chain Drive: Manufacturer part # DS196181 - For Big Twin 70-E84 w/chain drive. Replacement clutch shell comes with starter gear. Includes center bearing and snap rings. Replaces OEM number 37702-70A.. DS196181
1 on hand

More Info/Options for Drag Specialties Clutch Shell For Big Twin '70-E'84 w/Chain Drive DS196181

40 70

$29.95 Scorpio Ignition Disabler and Anti-Highjack Kit for PART NOS. 40-6901, 40-6902 and 40-6903 RID-1
Manufacturer: Scorpio
Dennis Kirk Part #: 406905
Scorpio Ignition Disabler and Anti-Highjack Kit for PART NOS. 40-6901, 40-6902 and 40-6903: Manufacturer part # RID-1 - Prevents hijacking by disabling the ignition.. RID-1
3 on hand

More Info/Options for Scorpio Ignition Disabler and Anti-Highjack Kit for PART NOS. 40-6901, 40-6902 and 40-6903 RID-1

40 70

$2.95 Drag Specialties No. 40 Pilot Jet for HD Keihin Carbs 20731
Manufacturer: Drag Specialties
Dennis Kirk Part #: H17600
Drag Specialties No. 40 Pilot Jet for HD Keihin Carbs: Manufacturer part # 20731 - For CV-style carbs. Sold each.. 20731
6 on hand

More Info/Options for Drag Specialties No. 40 Pilot Jet for HD Keihin Carbs 20731

40 70

$37.99 Joker Machine 1/2in. Chrome Breather Bolt Kit 02-40
Manufacturer: Joker Machine
Dennis Kirk Part #: 183177
Joker Machine 1/2in. Chrome Breather Bolt Kit: Manufacturer part # 02-40 - Button-head bolts fit most support brackets and breathers. Kit includes two 1/2in.-13 x 1 3/4in. bolts, four thick aluminum washers and four stainless steel washers. Made in the U.S.A... 02-40
1 on hand

More Info/Options for Joker Machine 1/2in. Chrome Breather Bolt Kit 02-40

40 70

$312.99 Leo Vince 70 Hand-Made Scooter Exhaust 7414
Manufacturer: Leo Vince
Dennis Kirk Part #: 4401897
Leo Vince 70 Hand-Made Scooter Exhaust: Manufacturer part # 7414 - Give your 70cc high-powered Zuma engine a true performance exhaust upgrade. TIG-welded stainless steel expansion chamber with a counter/cone structure for maximum power. Protective varnish coat on the expansion chamber lets you see the workmanship and welds. Satin-finish titanium muffler sleeve with stainless steel muffler body internals. Attaches to the cylinder head with a screwed flange and exhaust springs to minimize the risk of breakage. E-approved, meets European Standards noise levels for road use. , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective manufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 7414
1 on hand

More Info/Options for Leo Vince 70 Hand-Made Scooter Exhaust 7414

40 70

$6.95 Drag Specialties SAE 70 Motorcycle Oil 36010051
Manufacturer: Drag Specialties
Dennis Kirk Part #: 304724
Drag Specialties SAE 70 Motorcycle Oil: Manufacturer part # 36010051 - This oil is recommended for WELL WORN Pre-Evolution V-Twin engines when ambient temperature is between 80 F and 100 F. Gives engine outstanding protection during cold starting. Features special additives which provide excellent wear protection and durability while guarding against sludge buildup and oil breakdown. Meets all Harley-Davidson warranty performance criteria and does not void new vehicle warranties. Exceeds API CI-4/SL service rating. Available in a quart bottle.. 36010051
More than 10 on hand

More Info/Options for Drag Specialties SAE 70 Motorcycle Oil 36010051

40 70

40 70